Paco Kelly's Leverguns.com

Bronco

I am in Idaho! I ordered a part for my 72 Bronco from California! It is currently in Jersey City?????????? Where to next?

Only the Almighty knows!

Bronco

Do not know what the stack in the hull will be! I guess I will learn about it either from reading or talking to Al. I am shooting it in a Remington 1100 with smooth bore. I would guess it would work in a rifled barrel.

Bronco

When I get to testing them for sure there will be a report posted here

Bronco

Howdy All, I talked to Al yesterday about when he thought he would have the 410 slug available, been wanting one when I first saw it and it was just after he closed, he said probably next week. Yiipee!! Looks like they are getting ready to update their catalog! He said that he has gotten back with h...

Bronco

Kewl stuff

Bronco

DEI management!!

Bronco

Mickbr.
PM sent!

Bronco

Will PM you tomorrow! Have to go to the reloading room in my shop.

Bronco

I shoot a 300grgc cast, I know it's not a jacketed bullet, and I get 1750 fps out of my 24" barreled Marlin. Using 2400 powder!

Bronco

Please post a picture of the whole rifle?

Bronco

How do you make a blonde's eyes sparkle!

Shine a flashlight in their ear!

Bronco

PM sent! Nobody had any data that I could find when I got mine, around 14 years ago. So I cautiously worked up loads using a powder I had, have, lots of. I am interested in any data people have. My work up was with "surplus" IMR 4895. I bought a lot because it was $7.95/lb. I forget what t...

Bronco

I'd be careful with full house loads on a 50-110 with a tang sight! They kick harder than any mule. Watch out for your eyes. I put a receiver sight on mine! I noted the setting for ranges out to 500 yds. with each of the eight bullets I reload. Tack driver it is not but a locomotive stopper it is. I...

Bronco

Beautiful

Reminds me of picture of Turnbull's work!

Bronco

No pictures, but I drive a 2006 GMS 2500HD diesel and a 72 Ford Bronco I have had since 1975. Bought it off my friends father for $3200.00. I has since become almost attached to me as my dogs

Bronco

I use Tide! The TSP cleans very well! Or gloves.

Bronco

I played around years ago drilling a hole in a cast bullet that made it a HP. Of course I was a lot dummier then and put stuff into the hole topped it off with a primer. NOT suggesting that😬 but try drilling a hole as centered as you can get?? Sure would a like a range report to see how accurate the...

Bronco

Merry Christmas to all

Hope yours is happy and warm!
Be safe out there and God bless us all

John AKA Bronco

Bronco

I enjoy reading it also! I took the course on the American constitution and thought it was very informative; the back ground of the authors was also very educational.

Bronco

I was passing through Wy once and experienced that! Got to where they closed the Hwy and waited. All the semi's in the parking lot were parked nose into the wind

Bronco

Would shooting a DA by cocking the hammer be the same? I don't have a SA but most of my shooting revolvers is by cocking the hammer then work the trigger.
Only dumb question is the one you do not ask

Bronco

Not for me! Have to log in every time

Bronco

My problem is with the screw behind the trigger

Bronco

How accurate are they Jim?

Bronco

You are not alone

Bronco

Yes
Thank you very much.
A day without Leverguns is okay, but just not a great day!
John

Bronco

I bought one in .221 Fireball and had it barreled to a .20 vartarg. 40 grbt does 3500 fps. Most accurate rifle I have! Tennis balls at 300 yds no problem. Bipod and table of course! I am a 3 gun ground squirrel guy. 22lr 17 hmr and the vartarg.

Bronco

With my rifle I can shoot one hole groups! Then I ruin it with the second shot

Bronco

Would not load up for me this morning around 8 AM mountain time

Bronco

I cannot remember who it was I was reading about, maybe Elmer that they had several horizontal lines across the ramp of the front site for different distances! I can see how it would be used in your long range site picture. Hmmm, maybe a project might be coming up for my Redhawk ??

Bronco

I saw pictures of a thumb the was cut off at the cuticle by the gas from a S&W 460!

Bronco

It is a kewl rifle!
Don't have any idea what they are worth.

Bronco

What are they asking?

Bronco

I like 1 minute dots!
Have three of various makes.

Bronco

I should be so bad

Bronco

Happy Birthday

Bronco

Don't forget to tighten the nut behind the trigger

Bronco

Glad to hear

Bronco

Kewl find

Bronco

One of my carry's is a kimber eclipse with a 3" barrel, 45 acp naturally. A Sneaky Pete works . https://www.sneakypeteholsters.com/?gad_source=1&gad_campaignid=17952345344&gbraid=0AAAAADNiufLEDSXQO678w1SsxrFy-d3X8&gclid=Cj0KCQjw3OjGBhDYARIsADd-uX4jiu6o3cj2qsqgrADn9e8CBVSuFmRfvhEB0vr...

Bronco

That's kewl

Would it be possible to post the video? Please
John

Bronco

Howdy, Well now I feel fortunate to live about 3 mile away from Walker Winchesters :D I was talking to Sam a week ago about a Steven 940A 410 shotgun, my first from dad. He said that his reputation is spreading and his specialty was Winchester lever guns. Told me where to get the part for my 410 and...

Bronco

How's the casting coming along Gunny??

Bronco

Be sure to put some desiccant in the unplugged fridge. Just to be safe at least

Bronco

I am no expert ! I think I would try a little more heat or add a little tin OR both!
I put my mold on a gas stove or a hot plate for a little while. Putting it on the pot took forever and so long to bring the mold up to temperature... like twenty times with rejects to get it hot.
John

Bronco

Never touched the stuff and never will! That's my story and I'm stickin to it

Bronco

Well the used slug mold I ordered was a scam, refund courtesy of PayPal! It was not from a mold maker rather an individual. So am looking for a mold that I want. Cases will arrive this week for fire forming. Will update as progress happens,

Bronco

Howdy All, Who make the best powder coating powder?? I am planning on shooting some full bore slugs in my 410. I was reading that someone was powder coating the slugs to eliminate any leading. Soooo was wondering what the opinions are here about that! Also I read that a full bore slug fits the dimen...

Bronco

I believe the MEC has a single stage press that if ordered for 410 3" shell, they sell a spacer that fits into it to load 2 1/2" shells.

Bronco

Awesome looking rifle!
Very happy for you and I know the feeling when God has smiled on you

better that walking on clouds
Please updated with a range report when it happens.
John

Search found 1082 matches