double rifle
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 2.0
- Posts: 383
- Joined: Fri Dec 21, 2007 9:02 pm
- Location: ruin va
double rifle
who makes tubes for 12 bore shotguns in 45-70 or 450 marlin?? any help out there???
-
- Levergunner 2.0
- Posts: 238
- Joined: Sat Sep 08, 2007 2:47 pm
- Location: Tidewater VA
- crs
- Advanced Levergunner
- Posts: 3154
- Joined: Thu Sep 06, 2007 10:32 am
- Location: Republic of Texas
- Contact:
C Native;
I bought a .45-70 barrel insert for a 12 ga of mine from these folks:
http://www.mcace.com/
The insert went into the 12 ga barrel of my OU .22 hornet/12ga Savage turkey gun with a Bushnell Trophy 1.5 to 4 scope. It worked fine with reasonable 100 yard accuracy, except for one problem:
I could not leave the rifle insert in when I took the gun turkey hunting and then I had to go through a tedious allignment procedure to get the barrel shooting where I wanted it without messing up the scope zero for the .22 hornet. I still have the barrel, but have not shot it in years.
Check out this MCA (Multi Caliber Adapters) site and see what you think.
I bought a .45-70 barrel insert for a 12 ga of mine from these folks:
http://www.mcace.com/
The insert went into the 12 ga barrel of my OU .22 hornet/12ga Savage turkey gun with a Bushnell Trophy 1.5 to 4 scope. It worked fine with reasonable 100 yard accuracy, except for one problem:
I could not leave the rifle insert in when I took the gun turkey hunting and then I had to go through a tedious allignment procedure to get the barrel shooting where I wanted it without messing up the scope zero for the .22 hornet. I still have the barrel, but have not shot it in years.
Check out this MCA (Multi Caliber Adapters) site and see what you think.
CRS, NRA Benefactor Member, TSRA, DRSS, DWWC, Whittington Center
Android Ballistics App at http://www.xplat.net/
Android Ballistics App at http://www.xplat.net/
-
- Levergunner 1.0
- Posts: 63
- Joined: Mon Sep 24, 2007 1:09 pm
- Location: Springfield MO
CRS, did you try cutting witness marks on the insert
and barrel? I've always kind of wanted one of those, and wonder if it would work.
OK, OK, I made the jump.
double rifle
Remington is supose to come out with a 45-70 double and 30-06 rifles.Its the old bikals that never came out.Some of the 30-06 s are over here.I have not seen a 45-70 yet.I wish I had one in 375 winchester that would be really cool.