rifle t/d
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner
- Posts: 1
- Joined: Sun Jun 22, 2008 1:57 pm
rifle t/d
I have a Marlin 1893 take down rifle. After moving the t/d lever, what next? Can't get it apart.
-
- Levergunner 2.0
- Posts: 185
- Joined: Sun Dec 16, 2007 5:06 pm
- Location: north carolina
Re: rifle t/d
don't know about Marlins but have 2 winchesters. Lever open, unscrew take-down lever, then turn 1/4/ turn on them.
SASS 4146
BOLD 199
BOLD 199
-
- Levergunner 3.0
- Posts: 982
- Joined: Thu Sep 06, 2007 9:05 pm
- Location: New Kent County, VA
Re: rifle t/d
The end of the magazine tube should have a latch. Depress the latch, pull the magazine tube forward until it stops, and then unscrew the barrel assembly from the receiver ( full right-hand thread). Hope this helps.
Riamh Nar Dhruid O Spairn Lann
- motto on the Irish Regiments' flags
- motto on the Irish Regiments' flags
Re: rifle t/d
Make sure you open the action before you unscrew the barrel.