Which .357 Lever Gun.
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner
- Posts: 21
- Joined: Tue Dec 08, 2015 1:27 pm
Which .357 Lever Gun.
I am sure this is and old question but it is new to me.
After the holidays I am going to bite the bullet on a lever gun.
I am looking for a .357 to match my pistol. I rarely hunt but I do a lot of target shooting.
I have perused the internet until my head is swimming with opinions on Rossi, Marlin and Henry guns. I like the fact that the Marlin and Henry are side eject as I may want to add a scope someday. Right now my preference is for the Marlin Cowboy with a 20 Inch barrel. My second choice is a steel framed Henry.
The question is, with all the assorted internet hype, are there really any serious feed or accuracy issues with these guns.
After the holidays I am going to bite the bullet on a lever gun.
I am looking for a .357 to match my pistol. I rarely hunt but I do a lot of target shooting.
I have perused the internet until my head is swimming with opinions on Rossi, Marlin and Henry guns. I like the fact that the Marlin and Henry are side eject as I may want to add a scope someday. Right now my preference is for the Marlin Cowboy with a 20 Inch barrel. My second choice is a steel framed Henry.
The question is, with all the assorted internet hype, are there really any serious feed or accuracy issues with these guns.
Re: Which .357 Lever Gun.
My Buddy got a Henry .357....He loves it. He tells me that unless he holds it without canting to one side it does not cycle properly sometimes. I have also found that to be true with some, but not all, Marlins of different flavors.... To me, the Henry seems heavy at about 8 pounds.Grandpa Ron wrote:I am sure this is and old question but it is new to me.
After the holidays I am going to bite the bullet on a lever gun.
I am looking for a .357 to match my pistol. I rarely hunt but I do a lot of target shooting.
I have perused the internet until my head is swimming with opinions on Rossi, Marlin and Henry guns. I like the fact that the Marlin and Henry are side eject as I may want to add a scope someday. Right now my preference is for the Marlin Cowboy with a 20 Inch barrel. My second choice is a steel framed Henry.
The question is, with all the assorted internet hype, are there really any serious feed or accuracy issues with these guns.
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Re: Which .357 Lever Gun.
Marlin 1894CB 24"
Marlin 1894CB 20"
Marlin 1894CP 16"
Marlin 1894C 18.5"
My preferences in order. I have had no issues with any of the 3 Marlin 357s I own, CBx24, C and CP.. No experience with the others
TomF
Marlin 1894CB 20"
Marlin 1894CP 16"
Marlin 1894C 18.5"
My preferences in order. I have had no issues with any of the 3 Marlin 357s I own, CBx24, C and CP.. No experience with the others
TomF
Re: Which .357 Lever Gun.
I am not a Marlin type of guy, and have only one. 2005 year 1894c in 357 mag. I load semi wadcutters of around 148 grains and w231 powder. Feeds fine, and no jams, accuracy good.
if you are reloading your own get bullet samples and try them out. Maybe I got lucky first time out.
I would not buy a newer marlin, or Rossi.
Prefer Browning, winchester 92, Marlin.
if you are reloading your own get bullet samples and try them out. Maybe I got lucky first time out.
I would not buy a newer marlin, or Rossi.
Prefer Browning, winchester 92, Marlin.
- bmtshooter
- Levergunner 2.0
- Posts: 198
- Joined: Fri Sep 07, 2007 6:26 pm
- Location: North Central Texas
Re: Which .357 Lever Gun.
I have both the Marlin and the Rossi. "Shootability" is about the same with either. Due to the fat fore-end on the Marlins, I prefer the feel of the Rossi as a gun to carry around. If you shoot mostly targets, this might not be an issue for you.
None of those choices are bad. Kind of like trying to decide on blondes, brunettes, or redheads.........your opinion may be different on different days.
None of those choices are bad. Kind of like trying to decide on blondes, brunettes, or redheads.........your opinion may be different on different days.
NRA life member
- ollogger
- Advanced Levergunner
- Posts: 2807
- Joined: Mon Jul 05, 2010 2:47 pm
- Location: Wheatland Wyoming
- Contact:
Re: Which .357 Lever Gun.
Welcome Ron!!
I have a Henry in 357 & its a pleasure to shoot that gun, I shoot only cast bullets with mid range loads
for me the extra heft of the gun for off hand plinking is a plus!!I have no problems with 357 loads
but a little trouble with 38s, if I seated them out farther im sure they would work just fine
ollogger
I have a Henry in 357 & its a pleasure to shoot that gun, I shoot only cast bullets with mid range loads
for me the extra heft of the gun for off hand plinking is a plus!!I have no problems with 357 loads
but a little trouble with 38s, if I seated them out farther im sure they would work just fine
ollogger
-
- Advanced Levergunner
- Posts: 4429
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
Re: Which .357 Lever Gun.
If you find one and don't want it, let me know. Thanks.TomF wrote:Marlin 1894CB 24"
TomF
Re: Which .357 Lever Gun.
I flat love my NKJ Rossi trapper, that one will never leave the family.
"If you're gonna be a bear, be a grizzly"
- Griff
- Posting leader...
- Posts: 20877
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Which .357 Lever Gun.
and Welcome to THE Forum.
Are you planning on shooting .357Mags or mostly .38Spls? Or a combination thereof. For .357Mags I'd definitely stick with the Marlin for scoping ease, or the Rossi for the strength of the action. IMO, the Rossi is the stronger action over the Marlin 1894 or Henry's Big Bore. The difference in length between the .357Mag and .38Spl make feeding more a matter of compromise than an exacting science. Some folks have experienced some challenges with the Rossi in trying to cycle both .357 & .38s equally well. I have two, and while one was a breeze, the other took a little massaging. The Marlin and Henry are very similar in all operations except loading. I find the Henry upsized version of a .22 magazine a little off-putting and awkward. Others find its convenience for unloading without cycling live rounds thru the action a major plus.
Don't over look the use of a tang peep sight to take the place of a scope. They are great for increasing the field of focus one's eye is capable of. It naturally centers the eye and makes precision shooting quite possible, even for some of us older types, that otherwise might be very reliant on glass.
IME, bullet shape also plays a major part of smooth operation. Big, wide meplats are great, but, can be problematic in some leverguns. Especially when combined with sharp shouldered designs. The round flat nose or truncated cones with smooth shoulders seem to feed best and provide the least opportunity for interference with the chamber mouth.
Are you planning on shooting .357Mags or mostly .38Spls? Or a combination thereof. For .357Mags I'd definitely stick with the Marlin for scoping ease, or the Rossi for the strength of the action. IMO, the Rossi is the stronger action over the Marlin 1894 or Henry's Big Bore. The difference in length between the .357Mag and .38Spl make feeding more a matter of compromise than an exacting science. Some folks have experienced some challenges with the Rossi in trying to cycle both .357 & .38s equally well. I have two, and while one was a breeze, the other took a little massaging. The Marlin and Henry are very similar in all operations except loading. I find the Henry upsized version of a .22 magazine a little off-putting and awkward. Others find its convenience for unloading without cycling live rounds thru the action a major plus.
Don't over look the use of a tang peep sight to take the place of a scope. They are great for increasing the field of focus one's eye is capable of. It naturally centers the eye and makes precision shooting quite possible, even for some of us older types, that otherwise might be very reliant on glass.
IME, bullet shape also plays a major part of smooth operation. Big, wide meplats are great, but, can be problematic in some leverguns. Especially when combined with sharp shouldered designs. The round flat nose or truncated cones with smooth shoulders seem to feed best and provide the least opportunity for interference with the chamber mouth.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: Which .357 Lever Gun.
.
1) Welcome to the fire !
2) Get a Marlin 1894 - the Marlins have more aftermarket goodies available (peep sights, scope mounts, action rework kits, etc, etc, etc)
I've long been a non-denominational levergun addict - and it's hard to fault the Marlin Cowboy's for the uses you're intending to put a .357 through.
.
1) Welcome to the fire !
2) Get a Marlin 1894 - the Marlins have more aftermarket goodies available (peep sights, scope mounts, action rework kits, etc, etc, etc)
I've long been a non-denominational levergun addict - and it's hard to fault the Marlin Cowboy's for the uses you're intending to put a .357 through.
.
Re: Which .357 Lever Gun.
Marlin. Known quantity for the most part.
Henry appears to make a solid rifle, but they are front load only, which is totally a deal killer for me. For a hunting/range gun, that may be fine.
All of my rifles are evaluated for possible defense use first...front loading levers stopped being smart in 1866.
Henry appears to make a solid rifle, but they are front load only, which is totally a deal killer for me. For a hunting/range gun, that may be fine.
All of my rifles are evaluated for possible defense use first...front loading levers stopped being smart in 1866.
-
- Senior Levergunner
- Posts: 1970
- Joined: Sat Sep 15, 2007 1:42 pm
- Location: Arkansas
Re: Which .357 Lever Gun.
My favorite but a little more expensive, probably, is the Uberti 73 short rifle. Mine shoots very accurately, and has a very smooth action, although I did have to take it apart, and take off some rough edges because the shells were hanging up coming out of the mag tube, but after I did that, all has been well.
It is a little heavy, compared to a 92.
It is a little heavy, compared to a 92.
You do not have the required permissions to view the files attached to this post.
NRA Life Member, Patron
- J Miller
- Member Emeritus
- Posts: 14885
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: Which .357 Lever Gun.
My experience with .357 lever guns is limited. It was a late 80s Marlin 1894.
It would feed any 38 Spcl or 357 mag as long as the length was around the 1.60" mark and the shoulders were not too sharp. For instance, it would not reliably feed the Keith style 358429 bullets in 357 cases due to the location of the shoulder. It would feed them when loaded in 38 cases.
The bulbous phat forearm can be trimmed down if you find them awkward and clumsy as I do.
I'd be really careful about a new Remlin though, they aren't a patch to the original Marlin made guns.
Joe
It would feed any 38 Spcl or 357 mag as long as the length was around the 1.60" mark and the shoulders were not too sharp. For instance, it would not reliably feed the Keith style 358429 bullets in 357 cases due to the location of the shoulder. It would feed them when loaded in 38 cases.
The bulbous phat forearm can be trimmed down if you find them awkward and clumsy as I do.
I'd be really careful about a new Remlin though, they aren't a patch to the original Marlin made guns.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
- Old Ironsights
- Posting leader...
- Posts: 15084
- Joined: Mon Apr 02, 2007 9:27 am
- Location: Waiting for the Collapse
- Contact:
Re: Which .357 Lever Gun.
Any of them.
I'm partial to my M92/Rossi because (A) it's Stainless, (B) Doesn't have the issue of the "dreaded marlin jam" caused by wear on a soft lifter (and I've fixed a few...), and (C) I bought it from NKJ.
Still, the best .357 lever is the one you can buy and care for.
Does anything else really matter?
I'm partial to my M92/Rossi because (A) it's Stainless, (B) Doesn't have the issue of the "dreaded marlin jam" caused by wear on a soft lifter (and I've fixed a few...), and (C) I bought it from NKJ.
Still, the best .357 lever is the one you can buy and care for.
Does anything else really matter?
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
Re: Which .357 Lever Gun.
I had a Rossi M92 in .44 mag that shot very well. I would be looking at a Rossi.