HELP NEEDED
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
HELP NEEDED
I'M TRYING TO ASSEMBLE A WINCHESTER 1895 THAT ANOTHER PERSON TOOK APART. I HAVE A PARTS BREAKDOWN PICTURE BUT IT IS NOT REAL CLEAR. I HAVE LOOKED ON YOU TUBE BUT NO LUCK. ANYONE OUT THERE WITH A GOOD PIC OR LINK TO GO TO? ANY HELP WOULD BE APPRECIATED. BY THE WAY, THE GUN IS CHAMBERED IN 35WCF.
Re: HELP NEEDED
.
Here ya go: http://www.rarewinchesters.com/images/E ... mbly.shtml
To Assemble the Gun
Assemble the breech‑bolt complete with firing pin (17), extractor (10), ejector (11), etc. Slip the bolt into the receiver (21) and then install the locking bolt (39). Next come the sear (30), sear pin (31), sear spring (23) and sear spring screw (29). Assemble the finger lever complete and install the assembly by driving in the finger lever link pin from the left side (52). Put in the finger lever catch (42), catch plunger (43) and plunger spring (44).
Attach the link (48) to the lower tang by the link pin (46) (called catch pin on later models), and drive in the finger lever link pin (52), connecting the link with the finger lever. The link should be attached to the tang with the trigger (45) in place.
Put in the hammer (25) and hammer screw (62) followed by the mainspring (24) and mainspring screw (28). Then screw in the mainspring strain screw (60). Install the magazine with carrier in place. The carrier (34) and spring (33) are held in place by the carrier screw (22) entering the left outside of the receiver. (On some rifles a flat V spring extending under the forearm operates the carrier.) Install forend and buttstock.
.
Here ya go: http://www.rarewinchesters.com/images/E ... mbly.shtml
To Assemble the Gun
Assemble the breech‑bolt complete with firing pin (17), extractor (10), ejector (11), etc. Slip the bolt into the receiver (21) and then install the locking bolt (39). Next come the sear (30), sear pin (31), sear spring (23) and sear spring screw (29). Assemble the finger lever complete and install the assembly by driving in the finger lever link pin from the left side (52). Put in the finger lever catch (42), catch plunger (43) and plunger spring (44).
Attach the link (48) to the lower tang by the link pin (46) (called catch pin on later models), and drive in the finger lever link pin (52), connecting the link with the finger lever. The link should be attached to the tang with the trigger (45) in place.
Put in the hammer (25) and hammer screw (62) followed by the mainspring (24) and mainspring screw (28). Then screw in the mainspring strain screw (60). Install the magazine with carrier in place. The carrier (34) and spring (33) are held in place by the carrier screw (22) entering the left outside of the receiver. (On some rifles a flat V spring extending under the forearm operates the carrier.) Install forend and buttstock.
.
Last edited by Pete44ru on Mon Jan 20, 2014 4:50 pm, edited 1 time in total.
Re: HELP NEEDED
Wow, looks like Terry had relatives in NY.
Try Numrich Arms in Kingston for parts, they have online schematics too.
https://www.gunpartscorp.com/
Steve
Try Numrich Arms in Kingston for parts, they have online schematics too.
https://www.gunpartscorp.com/
Steve