Barnes XPB 250 gr in .45 Colt (for Rossi 92)

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
CaptainFinn
Levergunner 2.0
Posts: 179
Joined: Sun Sep 09, 2007 10:33 am
Location: Ashland, KY

Barnes XPB 250 gr in .45 Colt (for Rossi 92)

Post by CaptainFinn »

Hi, guys. A friend at work gifted me several boxes of XPB .45 250 gr bullets. I know these are intended for .454 casull, but I'm hoping they can be utilized as a .45 Colt in one of my Rossi 92's. Anyone have any recipes for this bullet using H110 or Unique? My usual load for both my 92's is the LBT LFNGC 300-gr over 23.5 gr H110 or the 250 XTP with a similar charge.
Top
piller
Posting leader...
Posts: 15239
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Barnes XPB 250 gr in .45 Colt (for Rossi 92)

Post by piller »

Sorry, but I don't. I suggest Hodgdon's website for the H110 and a 250 grain bullet. Speer might have something for you, also. I would expect the Rossi to do a fine job with that bullet due to the increased velocity out of a rifle barrel.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Top
Post Reply

Return to “General Discussion”