OT-Colt SAA question

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
SmokeEater2
Levergunner 3.0
Posts: 753
Joined: Mon Dec 17, 2007 3:02 pm
Location: North Arkansas

OT-Colt SAA question

Post by SmokeEater2 »

Does anyone know what year Colt started building SAA's with the bushing in the cylinder? :?
Top
rjohns94
Advanced Levergunner
Posts: 10820
Joined: Thu Sep 06, 2007 6:02 pm
Location: York, PA

Post by rjohns94 »

they started, then stopped, then started again when 3rd gen went to custom shop in early 90's so I am told. Betcha Sixgunner knows for sure
Mike Johnson,

"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
Top
North Bender
Levergunner
Posts: 24
Joined: Thu Sep 06, 2007 9:30 pm
Location: Washington

Post by North Bender »

They went back to the removable bushing in March of '03. Don't call it a 4th Generation!
Top
User avatar
JimT
Shootist
Posts: 5590
Joined: Thu Sep 06, 2007 5:04 pm

Re: OT-Colt SAA question

Post by JimT »

SmokeEater2 wrote:Does anyone know what year Colt started building SAA's with the bushing in the cylinder? :?
1873
Top
Mike Hunter
Member Emeritus
Posts: 285
Joined: Thu Dec 20, 2007 6:28 pm

Post by Mike Hunter »

As usual Jim is right on
Top
User avatar
Rexster
Levergunner 3.0
Posts: 602
Joined: Thu Sep 13, 2007 7:27 pm
Location: SE Texas

Re: OT-Colt SAA question

Post by Rexster »

JimT wrote:
SmokeEater2 wrote:Does anyone know what year Colt started building SAA's with the bushing in the cylinder? :?
1873
Yessir!
Have Colts, will travel.

The avatar is the menuki of my Rob Douglas Wakisashi.
Top
Gun Smith
Levergunner 3.0
Posts: 975
Joined: Fri Sep 14, 2007 10:24 am

Post by Gun Smith »

If you meant the bushing INTEGRAL to the cylinder it was , as above, the third generation.
Top
Post Reply

Return to “General Discussion”