Being Shipped ...Group Buy for the Ideal 375166 Mold
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Being Shipped ...Group Buy for the Ideal 375166 Mold
Gentlemen, good news! A Special Mold Order for the old Ideal 375166 (38-55) (330gr) ... the original factory standard bullet used for decades ... IS A GO!
Received from Lou Sellman, Lyman Distributor today ...
I ORDERED THE CHERRIES. I GUESS IT WILL TAKE ABOUT A MONTH FOR THE CHERRIES - LOU
So, if there are 38-55 shooters that want this proven bullet or mold collectors that have not seen this mold for over 40 years - here's your chance to buy a 'Piece of History'. Just post your desire here or send me an email/PM and I'll keep a running list of all. From the Polls on several other forums, there are 41 folks that also want this mold
Here's some details about the bullet ... http://www.castboolits.gunloads.com/sho ... ght=375166
Received from Lou Sellman, Lyman Distributor today ...
I ORDERED THE CHERRIES. I GUESS IT WILL TAKE ABOUT A MONTH FOR THE CHERRIES - LOU
So, if there are 38-55 shooters that want this proven bullet or mold collectors that have not seen this mold for over 40 years - here's your chance to buy a 'Piece of History'. Just post your desire here or send me an email/PM and I'll keep a running list of all. From the Polls on several other forums, there are 41 folks that also want this mold
Here's some details about the bullet ... http://www.castboolits.gunloads.com/sho ... ght=375166
Last edited by John Boy on Tue Mar 31, 2009 10:57 am, edited 1 time in total.
Regards
John
John
Re: IT'S A GO ...Group Buy for the Ideal 375166 Mold
Congratulations John Boy. It takes a lot of work to set something like that up.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: IT'S A GO ...Group Buy for the Ideal 375166 Mold
Rusty - Thanks. This will be the 3rd Ideal Mold ... Resurrected From the Dead that Lou Sellman has done for us with Lyman Products. Can't reason why Lyman never kept many of the Ideal Molds in their product line. The 375166 goes back to the 1800's and was the original 38 cal bullet for 38-55 factory loads ... Go Figure!
Regards
John
John
Re: IT'S A GO ...Group Buy for the Ideal 375166 Mold
Update: Ideal 375166 remake ... Order for 100 molds has been made to Lyman. Should be available soon depending on Lyman's production backlog
Regards
John
John
-
- Member Emeritus
- Posts: 2277
- Joined: Mon Apr 02, 2007 9:22 pm
- Location: Crenshaw County, Alabama
Re: IT'S A GO ...Group Buy for the Ideal 375166 Mold
I hope y'all don't mind, but I let some other folks know about the mold availability. Lyman might end up needing to make another run of them.
Doc Hudson, OOF, IOFA, CSA, F&AM, SCV, NRA LIFE MEMBER, IDJRS #002, IDCT, King of Typoists
Amici familia ab lectio est
UNITE!
Amici familia ab lectio est
UNITE!
- marlinman93
- Advanced Levergunner
- Posts: 6507
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: IT'S A GO ...Group Buy for the Ideal 375166 Mold
Will this actually throw a .375" bullet?
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
Re: IT'S A GO ...Group Buy for the Ideal 375166 Mold
Doc, I am sure that there will be enough molds for everyone. If demand exceeds the initial run - Not a Problem. Lou Sellman is a Lyman Distributor and HE owns the cherries (2) not Lyman. So, it's a matter of a telephone call to Nick Angelo at Lyman to get more.Doc Hudson wrote:I hope y'all don't mind, but I let some other folks know about the mold availability. Lyman might end up needing to make another run of them.
marlinman93 - the "375" is the prefix number of the mold that Ideal used in their catalogues before they went out of business. The bullet will have a 381 base diameter which is the same as the original Ideal - not a 375 base diameter. Okie Dookie?
Regards
John
John
-
- Levergunner 1.0
- Posts: 70
- Joined: Fri Sep 19, 2008 10:57 am
- Location: St. Louis
Re: IT'S A GO ...Group Buy for the Ideal 375166 Mold
arrrrgh if only i had a 38-55
Your friends might get me in the rush, but not before i turn your head into a canoe. Tombstone.
when guns are banned there will be two groups with guns the government and outlaws.
I intend to be among the outlaws
when guns are banned there will be two groups with guns the government and outlaws.
I intend to be among the outlaws
The Molds Are Being Shipped - Group Buy for Ideal 375166 Mol
The remake of the Ideal 375166 will be delivered by Lyman by Friday, April 11th
Ordering Instructions:
Order By Mail, Check or Money Order …
Price of the Mold - $75
Shipping - $10.00 plus $1.70 Insurance ($11.70)
Price of Top Punch - $8.50 (Optional)
Price of the Sizing Die - $19.95 (Optional
Send a letter with your shipping information and a check or money for your total purchase to:
Lou Sellman
2003 Ewings Mill Rd
Corapolis, PA 15108-3311
Order By Credit Card
Call Lou at (412) 299-0412
Lou Sellman email address … reloadersequipmentonline.com or customcastbullets@yahoo.com
ENJOY … It Has Been a Long Wait for a mold that hasn’t seen the Light of Day for over 40 Years!
Ordering Instructions:
Order By Mail, Check or Money Order …
Price of the Mold - $75
Shipping - $10.00 plus $1.70 Insurance ($11.70)
Price of Top Punch - $8.50 (Optional)
Price of the Sizing Die - $19.95 (Optional
Send a letter with your shipping information and a check or money for your total purchase to:
Lou Sellman
2003 Ewings Mill Rd
Corapolis, PA 15108-3311
Order By Credit Card
Call Lou at (412) 299-0412
Lou Sellman email address … reloadersequipmentonline.com or customcastbullets@yahoo.com
ENJOY … It Has Been a Long Wait for a mold that hasn’t seen the Light of Day for over 40 Years!
Regards
John
John
Re: Being Shipped ...Group Buy for the Ideal 375166 Mold
Update on the Ideal 375166 Mold Order:
Those who paid by check or money order, your mold order was shipped yesterday. Those who paid by credit card, your order will be going out tomorrow
Those who paid by check or money order, your mold order was shipped yesterday. Those who paid by credit card, your order will be going out tomorrow
Regards
John
John
Re: Being Shipped ...Group Buy for the Ideal 375166 Mold
Folks, know this is an old thread, but you might be interested in the First Range Test results using the 375166 bullet back in 2009 ... http://www.shilohrifle.com/forums/viewtopic.php?t=13911
Regards
John
John
Re: Being Shipped ...Group Buy for the Ideal 375166 Mold
nice shooting.
did you sell all those molds?
i might be in the market for one, maybe another run sometime?
did you sell all those molds?
i might be in the market for one, maybe another run sometime?
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
Re: Being Shipped ...Group Buy for the Ideal 375166 Mold
Scroll back up and call Lou Sellman. He bought extras for inventory because he is a Lyman Distribution. I just did the Group Buy legworki might be in the market for one, maybe another run sometime?
Regards
John
John