Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
They were just sitting there, being ignored in the corner. Two brand new S&W M&P 10mms, a 4" and the 4.62. Looked them both over and decided the longer barreled pistol need to come home with me.
I've been chasing a S&W 1006 for a while, but they are selling for more than I want to spend on one.
So, in my mind I've completed the set. A CHP 4006, 40 S&W, Blackhawk convertible 10/40 and the new M&P 10mm.
A big thanks to ScottT for graciously selling some Dillon gear, I can get a little more serious about reloading for these two.
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
I have had a M&P 45 and still have M&P 2.0s in 9mm and .40.
My only 10mm is a Kimber.....
I have 6 or 7 or 8 Glocks so wasn't really wanting another.
Another M&P sounds dandy.
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
I've had an M&P 9mm for several years, great pistol. I had a Cot Delta that I'd gotten from a friend's estate. That thing would chew the center out of a target at 25yds time after time. I ended up selling it. Bummed me out having it around when my friend was no longer with us.
Figured this one would due for now. Especially when I have a couple thousand rounds just sitting around with nothing to do.
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
2ndovc wrote: ↑Sun May 29, 2022 12:02 pm
A big thanks to ScottT for graciously selling some Dillon gear, I can get a little more serious about reloading for these two.
jb
I'm really happy that you will be able to make use of that equipment. Enjoy!
RIA makes a good 10mm. Looks like a 1911 with fiberoptic front sight. Heavy enough to tame the recoil.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
I had a Kimber 1911 6” in 10mm for awhile . Sounds kinda stupid , but I bought it solely with intentions of killing a deer using a 180 or 200 grain homecast bullet . Also bought a Leupold DeltaPoint for it but never could get the correct Leupold adapter base to mount the darn thing . So I shot it enough to work up four loads cast and jacketed 180’s as well as cast and jacketed 200’s . Then cleaned the gun up and in the safe after about six months I sold it and the DeltaPoint for more than what I pad for them . Almost forgot I’ve got a setup Lee Loadmaster for the 10mm and another for the 45ACP . Probably oughtta take pics of them , box them up then list them on GB as well as a Lee 1000 for the 9mm and 357 . I have no intention of loading pistol stuff any longer .
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
2ndovc wrote: ↑Sun May 29, 2022 12:02 pm
A big thanks to ScottT for graciously selling some Dillon gear, I can get a little more serious about reloading for these two.
jb
I'm really happy that you will be able to make use of that equipment. Enjoy!
I will and it is much appreciated!
Piller,
I've been looking at those and the Girsan 1911 with the 6" slide.
As was said above, these things are addictive.
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
If anyone knows of a source for 10mm M&P magazines, please let me know. I'm not having any luck with the usual places.
I sent an email to S&W, we'll see if they respond.
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Jason, I have been looking at the Girsan as well. It's a hefty one at 50 ounces, but it ought to be a pussycat to shoot even with heavy Underwoods or their home-brewed equivalents.
so wasn't really wanting another. 
