Bill in Oregon wrote: ↑Mon Jun 12, 2017 12:48 pm
Thanks Lenn. Got it from a game law enforcement officer. Gunny, I'd have preferred a longer barrel, but this will carry nicely. I hear the newest version of the High Standard company offers magazines.
Congrats, Bill !
The new HS company has other parts, as well.
The 1947 HD-MILITARY I traded to a buddy had a few parts missing when I bought it, and the parts they sent me needed only a very little bit of fitting to my particular gun.
BTW - If you're not familiar with it, the rear sight can be tricky to adjust.
With the slide open and locked to the rear or off the gun, you will notice a screw at the end and underneath the slide that goes straight up into the slide.
Loosen that screw one turn ONLY - do NOT remove it, as it merely retains the next screw to loosen that is on the outside end of the slide.
Loosen that next screw 2 turns, and the sight can be adjusted.
I would suggest moving the sight blade by the blade only as that little tiny pin in the serrations is only supposed to hold the blade in place until you squeeze it tight with the screw again.
The sight can be adjusted for windage & elevation.
If you're unclear, just google "High Standard HD Military rear sight adjustment".
.