I'm here in Vermont at a Cowboy Action Shoot. I'm sighting in my Mirkou Winchester 1894 rifle in 38-55....Everything is going great. I get ready to put the rifle back in the case and a part falls out of the bottom. I searched all parts drawings I could find here on the internet with no luck.
Can anyone identify this part and tell me where it belongs
HELP!!!!!
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Senior Levergunner
- Posts: 1232
- Joined: Thu Sep 17, 2009 3:45 pm
- Location: Dartmouth, MA
- Contact:
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: HELP!!!!
Ejector ? The photo needs something in it to judge for scale.
-
- Senior Levergunner
- Posts: 1406
- Joined: Mon Jul 28, 2008 8:33 pm
- Location: West central Montana
Re: HELP!!!!
This not a Japster ejector but a winchester http://www.gunpartscorp.com/Products/317890.htmChuck 100 yd wrote:Ejector ? The photo needs something in it to judge for scale.
Trump 2024
All responses have been cleared by the law firm of "Elmer and Fudd."
All responses have been cleared by the law firm of "Elmer and Fudd."
Re: HELP!!!!!
It's just an extra part, don't worry about it
I'm not sure why the ejector would just fall out.
I'm not sure why the ejector would just fall out.
- Griff
- Posting leader...
- Posts: 20877
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: HELP!!!!!
Yep, that looks like the ejector.
Item #14
Item #14
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
- Senior Levergunner
- Posts: 1232
- Joined: Thu Sep 17, 2009 3:45 pm
- Location: Dartmouth, MA
- Contact:
Re: HELP!!!!!
https://www.rebelgunworks.net/products/ ... le-ejector
Yup, ejector. Now I need to figure out how to put it back in and where the spring and the pin are.
Yup, ejector. Now I need to figure out how to put it back in and where the spring and the pin are.
-
- Advanced Levergunner
- Posts: 4296
- Joined: Wed Sep 15, 2010 12:57 pm
- Location: Vinita, I.T.
Re: HELP!!!!!
Good luck on finding the other parts. My suggestion is to get a big magnet and troll for it. Really, just buy new. And figure how it just fell out.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
Currently living my eternal life.
NRA Life
SASS
ITSASS
Re: HELP!!!!!
Ive never seen a Winchester 94 lose one, though I did see a Rossi 92 lose one for no apparent reason. I replaced it in the guys gun, expecting to see some super loose fit of the pin that retained it, but it seemed to fit OK and be held in place when reinstalled.
That's colored my impression of Rossis ever since. That, and the odd lines of the lower receiver.
That's colored my impression of Rossis ever since. That, and the odd lines of the lower receiver.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-
Isnt it amazing how many people post without reading the thread?
Isnt it amazing how many people post without reading the thread?