Hi Terry,
Good to see you posting again. Would you be willing to share some of you favorite 35Rem handloads?
Also what cast do you recommend?
Thanks,
Steve
Questions on the 35Rem in a Marlin 336 for TERRY MURBACH
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Re: Questions on the 35Rem in a Marlin 336 for TERRY MURBACH
Good question, Steve!
Yes, please Terry!
-Stretch
Yes, please Terry!
-Stretch
-
- Shootist
- Posts: 1682
- Joined: Sun Dec 09, 2007 7:46 pm
- Location: BLACK HILLS, DAKOTA TERRITORY
Re: Questions on the 35Rem in a Marlin 336 for TERRY MURBACH
Well let me see here:
R-P 35REM brass
Speer 180grJFP
35.0grs H322
WLR primers
W-W brass
R-P 200gr JSP CORE-LOKT
39.5GRS VARGET
WLR primers
YOU DOUBLE CHECK EVERY BIT OF THIS AGAINST YOUR MANUALS, THAT IS A CLEAR ORDER !!
I have a pile of 35 caliber cast bullets to test but never got a round tuit....not even a square tuit matter of fact.
R-P 35REM brass
Speer 180grJFP
35.0grs H322
WLR primers
W-W brass
R-P 200gr JSP CORE-LOKT
39.5GRS VARGET
WLR primers
YOU DOUBLE CHECK EVERY BIT OF THIS AGAINST YOUR MANUALS, THAT IS A CLEAR ORDER !!
I have a pile of 35 caliber cast bullets to test but never got a round tuit....not even a square tuit matter of fact.
RIDE, SHOOT STRAIGHT, AND SPEAK THE TRUTH
Re: Questions on the 35Rem in a Marlin 336 for TERRY MURBACH
Thanks Terry
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
-
- Levergunner 2.0
- Posts: 190
- Joined: Mon Dec 02, 2013 11:45 am
Re: Questions on the 35Rem in a Marlin 336 for TERRY MURBACH
I have found 31.0 gr. Rx7 with a Rem. 200 gr RN. Velocity should be around 2050-2100 fps. I use this in my Model 8 Rem. and a Model 141 Rem. I also use 33.0 gr. Rx7 with a 158 gr. SP. (pistol bullet), velocity, I think, should be around 2300 fps.
Re: Questions on the 35Rem in a Marlin 336 for TERRY MURBACH
YESSIR!YOU DOUBLE CHECK EVERY BIT OF THIS AGAINST YOUR MANUALS, THAT IS A CLEAR ORDER !!
And thanks.
-Stretch
Re: Questions on the 35Rem in a Marlin 336 for TERRY MURBACH
Thank you Terry, I will check with the manuals.
I hope soon to find a mold for a 200gr cast. I bet cast will shoot fine in 35Rem, almost made for shooting cast.
I did find some of those Hornady sqishy point 200gr, hope to do a range report on them.
Thanks again,
Steve
I hope soon to find a mold for a 200gr cast. I bet cast will shoot fine in 35Rem, almost made for shooting cast.
I did find some of those Hornady sqishy point 200gr, hope to do a range report on them.
Thanks again,
Steve
-
- Senior Levergunner
- Posts: 1247
- Joined: Thu Sep 06, 2007 11:14 pm
- Location: Billings, Montana
Re: Questions on the 35Rem in a Marlin 336 for TERRY MURBACH
Thanks Terry!Terry Murbach wrote:Well let me see here:
R-P 35REM brass
Speer 180grJFP
35.0grs H322
WLR primers
W-W brass
R-P 200gr JSP CORE-LOKT
39.5GRS VARGET
WLR primers
YOU DOUBLE CHECK EVERY BIT OF THIS AGAINST YOUR MANUALS, THAT IS A CLEAR ORDER !!
I have a pile of 35 caliber cast bullets to test but never got a round tuit....not even a square tuit matter of fact.
"Any man who covers his face and packs a gun is a legitimate target for any decent citizen"
Jeff Cooper
Jeff Cooper