Free .32 Win.Spl.brass
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 2.0
- Posts: 105
- Joined: Mon Dec 17, 2007 2:39 pm
- Location: South Shore of Oneida Lake,Central NY
Free .32 Win.Spl.brass
I have plenty of my own .32 brass but I won't turn by back on any once fired brass I find in the brass bucket at my club.Over the last month or so I've plucked 60 pcs. of brass (30 pcs. of rem.and 30pcs.of hornady brass)from that bucket.It's not a lot but you can't beat the price.So if you could use this brass,toss your name in the hat and I'll pull a name Sunday night(Nov.30th).
Vic
Winchester Model 94(61').32 Winchester Special
Winchester Model 94(61').32 Winchester Special
Re: Free .32 Win.Spl.brass
That sure is nice of you Victor. You can consider my name in the hat. I was just noticing my 32WS inventory was getting a little worn.
Thanks again,
OW
Thanks again,
OW
"Oh bother", said Pooh, as he chambered another round.
- Shasta
- Senior Levergunner
- Posts: 1558
- Joined: Thu Sep 06, 2007 10:50 pm
- Location: Shasta County, the far right stronghold in California
Re: Free .32 Win.Spl.brass
A very generous offer! Please count me in.
SHASTA
SHASTA
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: Free .32 Win.Spl.brass
You may find that Hornady brass is shorter than the rest. That fact can be overcome but I would not try to load it with the same die setting or loads as the rest . It will have to be loaded differently and not mixed for best results.
Good on you for doing a karma drawing friend. Good luck to the guys who drop their name in the hat. I have plenty of .32 brass myself.
Good on you for doing a karma drawing friend. Good luck to the guys who drop their name in the hat. I have plenty of .32 brass myself.
Re: Free .32 Win.Spl.brass
victor i do not have very much 32 spl. brass so I will ask to put my name in the hat.
Many thanks for being so generous.
hayabusa
Many thanks for being so generous.
hayabusa
-
- Levergunner 2.0
- Posts: 497
- Joined: Mon Oct 04, 2010 7:00 pm
- Location: PA
Re: Free .32 Win.Spl.brass
Please put my name in.
Thanks!
Thanks!
-
- Levergunner 2.0
- Posts: 112
- Joined: Thu Sep 06, 2007 8:36 pm
- Location: Alaska
Re: Free .32 Win.Spl.brass
Victor, what a nice thing to do. Happy thanksgiving! I would also like to add my name. Thanks!
"Anyone who claims the 30-06 is ineffective has either not used one or is un-wittingly commenting on their marksmanship." Phil Shoemaker
- vancelw
- Advanced Levergunner
- Posts: 3932
- Joined: Mon Sep 28, 2009 1:56 pm
- Location: 90% NE Texas and 10% SE Montana
Re: Free .32 Win.Spl.brass
Please add my name as I have a newly acquired .32 Special.
And Thanks!
And Thanks!
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
Re: Free .32 Win.Spl.brass
Count me in and thanks.
-
- Advanced Levergunner
- Posts: 4428
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
Re: Free .32 Win.Spl.brass
I don't need any but wanted to say thanks for doing this, very generous.
- Griff
- Posting leader...
- Posts: 20869
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Free .32 Win.Spl.brass
+1.jnyork wrote:I don't need any but wanted to say thanks for doing this, very generous.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- ollogger
- Advanced Levergunner
- Posts: 2807
- Joined: Mon Jul 05, 2010 2:47 pm
- Location: Wheatland Wyoming
- Contact:
Re: Free .32 Win.Spl.brass
I'm well supplied on 32spl brass but thank you for the offer
hope some one puts it to good use!!
ollogger
hope some one puts it to good use!!
ollogger
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: Free .32 Win.Spl.brass
It has been brought to my attention that the Hornady brass above measures the same as the Rem cases in length.
As I have not used it myself I was guessing that it COULD be shorter than standard because some others they make are.
Due to the ogive of the gummy tipped bullets other calibers of their make have short brass to allow proper overall length. I assumed the .32 would be the same. I may be all wet on this one. I have been told they measure the same, so then you are good to go. We learn something every day.
As I have not used it myself I was guessing that it COULD be shorter than standard because some others they make are.
Due to the ogive of the gummy tipped bullets other calibers of their make have short brass to allow proper overall length. I assumed the .32 would be the same. I may be all wet on this one. I have been told they measure the same, so then you are good to go. We learn something every day.
Re: Free .32 Win.Spl.brass
I'm in... thank you very much!
Re: Free .32 Win.Spl.brass
Count me in. Thanks!
-
- Senior Levergunner
- Posts: 1232
- Joined: Thu Sep 17, 2009 3:45 pm
- Location: Dartmouth, MA
- Contact: