Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Worked out the tong issue with little trouble. First time so there was some R&D, but worked through it. Finished off the notches with a file.
We have all sorts of scrap metal around, plenty of metal to make our own tools with.
Enjoy!!
That which does not kill me has made a grave tactical error.
You may want to make a couple more tong sets. Curved jaws work best for holding round stock and for smaller flat pieces. I have 3, flat jaws, round jaws and a pair that that one side flat, the other round. The last I made myself for working ½-round stock for horseshoes.
Last edited by Griff on Tue Aug 06, 2013 10:41 pm, edited 1 time in total.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession! AND... I'm over it!!
No I ain't ready, but let's do it anyway!
For a quick set to get by with, I take an old Vise Grip pliers and replace the adjusting screw with a
piece of all thread rod or just a bolt with a longer piece of pipe welded on to lengthen the handle.
Kinda red neck but it does work.
Have fun!!