303 brit powder?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
303 brit powder?
My nephew bought himself a nice sporterized Lithgow No 1 mkIII and now he is thinking of taking up reloading. My sister and I are looking around for things that he will need for Christmas presents. I have never loaded for the 303 but I imagine a medium powder should be ok for it. What have you fellas found worked for you ?
Happiness is a comfortable stump on a sunny south facing mountain.
Re: 303 brit powder?
Lyman 314299 and 19-20 gr SR4759. I have never loaded jacketed bullets for any of my 5 Enfields.
Yance
There's a fine line between "Hobby" and "Mental Illness".
outawaysforge.wordpress.com
"Gun control" isn't about guns, it's about "control".
There's a fine line between "Hobby" and "Mental Illness".
outawaysforge.wordpress.com
"Gun control" isn't about guns, it's about "control".
- 2ndovc
- Advanced Levergunner
- Posts: 9363
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: 303 brit powder?
IMR 4895 and Hornady's 174 SP.
One of my favorite cartridges!
jb
One of my favorite cartridges!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
- J Miller
- Member Emeritus
- Posts: 14885
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: 303 brit powder?
Winchester 760 and a Sierra 180gr soft point has been one of my bestest loads for my 303s.
Joe
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
Re: 303 brit powder?
I have used H4350, IMR 4350, IMR 4895, IMR 4064, IMR 4320 and WW760. I think you can duplicate ball ammo velocities with any of these powders. I now use IMR or H 4350. Charge varies...
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Re: 303 brit powder?
Thanks for the info. I think I'm going to put a little package together for him. I was thinking IMR 4895 but I'll look into others also. He will be on his first deer hunt with me next weekend so I can talk a bit with him to see if he really is interested in reloading. I think he said 150 gr bullets seem more accurate in his rifle but I don't know how many kinds of the 180s he has tried.
Happiness is a comfortable stump on a sunny south facing mountain.
Re: 303 brit powder?
I've had good luck with 3031. I've also tried Varget and I think that it might be a good one, just haven't used it enough yet to be sure.
-
- Levergunner 3.0
- Posts: 806
- Joined: Thu Apr 03, 2008 8:10 pm
- Location: Simpsonville,SC
Re: 303 brit powder?
I hunted for several years with a British .303.My accurate load was a Speer 150 Gr. soft point over 40 grains of IMR4895.
Stan in SC
Stan in SC
The more I listen,the more I hear....and vice versa.
45-70,it's almost a religion
45-70,it's almost a religion
Re: 303 brit powder?
Word is that 3031 was made for the .303, i.e. 303 1. I've read that a couple of times but can't remember the source so I'm not so sure of it now. It does work.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
-
- Advanced Levergunner
- Posts: 2055
- Joined: Mon Dec 10, 2007 12:43 pm
- Location: Between No Where & No Place, WA
Re: 303 brit powder?
Not sure if this is 100% accurate, but here's is some background on the IMR powders and their intended purposes:
http://en.wikipedia.org/wiki/Improved_M ... ifle_(IMR)
http://en.wikipedia.org/wiki/Improved_M ... ifle_(IMR)
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Re: 303 brit powder?
I use Reloder 15 (42 grains) under a Sierra Pro-hunter 180 to almost duplicate military Mk. VII velocity. Very accurate as well.
Regards, Gerry
Regards, Gerry
- Ji in Hawaii
- Senior Levergunner
- Posts: 1987
- Joined: Sat Jan 15, 2011 1:05 pm
- Location: Moku Manu, Hawai'i
Re: 303 brit powder?
I used IMR3031 in my 7.7 Arisaka which is basically a rimless 303 Brit.
My sporter Lithgow SMLE is rebarreled to 45/70.
My sporter Lithgow SMLE is rebarreled to 45/70.
Illegitimus Non Carborundum
Akā, ʻo ka poʻe hilinaʻi aku iā Iēhova, e ulu hou nō ko lākou ikaika;
E piʻi ʻēheu aku nō lākou i luna, e like me nā ʻaito;
E holo nō lākou, ʻaʻole hoʻi e māloʻeloʻe,
E hele mua nō lākou, ʻaʻole hoʻi e maʻule.
`Isaia 40:31
Akā, ʻo ka poʻe hilinaʻi aku iā Iēhova, e ulu hou nō ko lākou ikaika;
E piʻi ʻēheu aku nō lākou i luna, e like me nā ʻaito;
E holo nō lākou, ʻaʻole hoʻi e māloʻeloʻe,
E hele mua nō lākou, ʻaʻole hoʻi e maʻule.
`Isaia 40:31
-
- Levergunner
- Posts: 31
- Joined: Sat Mar 27, 2010 7:40 pm
Re: 303 brit powder?
Over here Varget is considered a good powder for the three-oh-three. Its the only one I used.
Re: 303 brit powder?
Again thanks to everyone. I was basically right in that a medium powder should work. I am probably going to put a package of various powders I have on hand that he can try and we will go from there ie imr 4895 rl 15 and i think I have imr 3031 if not my 30-30 needs to be fed.
Happiness is a comfortable stump on a sunny south facing mountain.
Re: 303 brit powder?
My No.5MkI ('Jungle Carbine') likes the Hornady 150-gr Spire Point and Win 760.
- KirkD
- Desktop Artiste
- Posts: 4406
- Joined: Sat Apr 07, 2007 6:52 am
- Location: Central Ontario, Canada
- Contact:
Re: 303 brit powder?
I'm using IMR 3031. Still developing the load, but right now it is a tame 32 grains of IMR 3031 under a 174 grain Hornady RN. Might boost it up to 33 grains. Then I want to develop a load for my RCBS 180 GC sized to .312.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
-
- Levergunner 2.0
- Posts: 113
- Joined: Mon Jan 21, 2008 6:49 am
- Location: Daniels, WV
Re: 303 brit powder?
Make sure you buy a set of Lee Collet Dies and only use the brass that was shot in that 303 and you will be satisfied with case life.
Bob
Bob
- Old Time Hunter
- Advanced Levergunner
- Posts: 2388
- Joined: Sun Apr 01, 2007 11:18 am
- Location: Wisconsin
Re: 303 brit powder?
Lee C312-160-2R w/37 grains of H4895 work well for me.
Re: 303 brit powder?
Good advice, those dies do work and I keep the brass separated for each of my three No4s.Bob Hatfield wrote:Make sure you buy a set of Lee Collet Dies and only use the brass that was shot in that 303 and you will be satisfied with case life.
Bob