Barrel Relining Question ???
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Barrel Relining Question ???
I’m thinking about having my Winchester model 73
in 38 WCF relined by Redman’s.
http://www.redmansrifling.com/relining.htm
Presently, about every other shot keyholes.
If I can restore some accuracy to this old girl, I would
like to get her out in the woods this year using old school
black powder 38-40’s.
My question is, have any of you had a barrel relined
by Redman’s? If so would you recommend them?
Thanks guys
in 38 WCF relined by Redman’s.
http://www.redmansrifling.com/relining.htm
Presently, about every other shot keyholes.
If I can restore some accuracy to this old girl, I would
like to get her out in the woods this year using old school
black powder 38-40’s.
My question is, have any of you had a barrel relined
by Redman’s? If so would you recommend them?
Thanks guys
Re: Barrel Relining Question ???
Redman's are fine, for "shooters". I have never used them, but I have had 3 relines done by John Taylor using match grade TJ's liners. John's work is pretty much invisible. He's also old school. He'll send your rifle back, with an invoice attached, then after you inspect the work you send him payment.
This is a 22LR Stevens Favorite and 38-55 Marlin 1893 he did. www.johntaylormachine.com
This is a 22LR Stevens Favorite and 38-55 Marlin 1893 he did. www.johntaylormachine.com
I know a whole lot about very little and nothing about a whole lot.
Re: Barrel Relining Question ???
Maybe I should say nothing because I have never had Redmans do a barrel, But I have never heard a negative report about them from many people. Everyone said the work was first class and that you couldn't see the liner without looking very hard.
Also I think Redmans asks for a little more lead time, and hunting with it this fall may be optomistic.
I love the 38 WCF and have killed a few deer with one. Its very effective at woods ranges.
Read Fifty years a hunter and trapper sold by Fur fish and Game Magizine. Mr Woodcock said his 73 in 38WCF never let him down and he market hunted in PA.
Also I think Redmans asks for a little more lead time, and hunting with it this fall may be optomistic.
I love the 38 WCF and have killed a few deer with one. Its very effective at woods ranges.
Read Fifty years a hunter and trapper sold by Fur fish and Game Magizine. Mr Woodcock said his 73 in 38WCF never let him down and he market hunted in PA.
Re: Barrel Relining Question ???
Thanks for the replies.
I hadn't given lead time much thought.
If I have to wait another year to use it on game that's okay I can wait.
I just don't feel it would be ethical to use it on deer in it's current
inaccurate condition.
I hadn't given lead time much thought.
If I have to wait another year to use it on game that's okay I can wait.
I just don't feel it would be ethical to use it on deer in it's current
inaccurate condition.
Re: Barrel Relining Question ???
One of those rifles I regret letting go. I wish u much success in that endeavor
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
-
- Senior Levergunner
- Posts: 1232
- Joined: Thu Sep 17, 2009 3:45 pm
- Location: Dartmouth, MA
- Contact:
Re: Barrel Relining Question ???
I recently relined my 1873 with a Redman that I purchased through Brownells. Amazing accurcy with this old 38-40!
Read about it here:
www.rvbprecision.com
Read about it here:
www.rvbprecision.com
-
- Levergunner 2.0
- Posts: 348
- Joined: Sun Sep 09, 2007 8:19 pm
- Location: Western ND
Re: Barrel Relining Question ???
Top off your powder charge with shotgun shot buffer powder before you seat the bullet. The plastic powder acts as gas check and will improve accuracy. Try it, nothing to lose and a lot cheaper than a reline...won't devalue your 1873.
Behind every sucessful rancher is a wife with a job in town.
Re: Barrel Relining Question ???
Wow! awsome read, thanks much for the link.rbertalotto wrote:I recently relined my 1873 with a Redman that I purchased through Brownells. Amazing accurcy with this old 38-40!
Read about it here:
http://www.rvbprecision.com
That sure made a night and day difference
I'm definitely getting this done.
Re: Barrel Relining Question ???
Mike, if I can get this old girl up to snuff, you'rerjohns94 wrote:One of those rifles I regret letting go. I wish u much success in that endeavor
more than welcome to barrow the o'l gal and get
her out there doin what she was made for back in 1893.
I'll be spending most of my hunting hours with that
new stringed toy in hand this fall anyway.
-
- Advanced Levergunner
- Posts: 4296
- Joined: Wed Sep 15, 2010 12:57 pm
- Location: Vinita, I.T.
Re: Barrel Relining Question ???
Had a Redman's liner put in my '92/32-20 a few years back. Very accurate, you have to look close to see it and I still have my barrel markings. Sent it to NKJ who made it feed like, no better than a new one.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
Currently living my eternal life.
NRA Life
SASS
ITSASS
Re: Barrel Relining Question ???
Should read? Sent it to NKJ who made it feed like, not like, better than a new one.M. M. Wright wrote: Sent it to NKJ who made it feed like, no better than a new one.
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Re: Barrel Relining Question ???
I had Redman reline a Winchester Low-wall 22 musket. Barrel was marked 22 Long Rifle, rifling was 1-20 twist, shot good 8 inch groups, was evidently rifled for 22 Shorts. He did a great job, shoots 10 shots with right ammo into about 3/4's of an inch at 25 yards, Really improved the rifle. The rifle was made up by winchester after they stopped making the muskets, rifling it came with appeared to be worn and lands were rounded, evidently from over cleaning. had original peep sights and lyman hooded front sight. I do enjoy taking to an outdoor range shooting cb longs, only hear the hammer fall, still get under an inch at 25 yards, fun to watch the young guys with their big blasters and black rifles trying to keep theirs in a 10 inch circle at 50 or 100 yards. Required close examination to see reline job. ATB
Re: Barrel Relining Question ???
I’ve decided to have Redman’s do the reline.
I will be shipping the old girl out Tuesday morning.
I was told it would be a 4 to 6 month turnaround time.
I figured with the repaired top tang, the collector value
is a no never mind. So I decided to turn it back into a
Shooter. Those little BP cartridges are a hoot to shoot.
I will be shipping the old girl out Tuesday morning.
I was told it would be a 4 to 6 month turnaround time.
I figured with the repaired top tang, the collector value
is a no never mind. So I decided to turn it back into a
Shooter. Those little BP cartridges are a hoot to shoot.
Re: Barrel Relining Question ???
Relining was the right thing to do and I know you will be extremely happy with the improved accuracy, but 4-6 months? John Taylor is rarely over 6-8 weeks.
I know a whole lot about very little and nothing about a whole lot.