Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Merry CHRISTmas and Happy New Year to y'all.. Todd
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
U get UR Makita and drill a hole all the way through the Receiver just in front of the Hammer. 1/4 in hole works best. Use a machine screw with course threads not fine threads, stick it through the hole with hammer cocked and install the nut. Finished.
PERRY
Merry Christmas.
3leggedturtle wrote: Merry CHRISTmas and Happy New Year to y'all.. Todd
You got me good!
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester. Blog: https://www.kirkdurston.com/
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester. Blog: https://www.kirkdurston.com/
KirkD may be right - wild and crazy guy that he is but you are eventually going to have to clean up the hole with a drill. Sometimes I wonder if Kirk may not have spent too much time at -35 to -45 degrees. Use the bicep my ---
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...
pwl44m wrote:U get UR Makita and drill a hole all the way through the Receiver just in front of the Hammer. 1/4 in hole works best. Use a machine screw with course threads not fine threads, stick it through the hole with hammer cocked and install the nut. Finished.
PERRY
Merry Christmas.
Use a 5/8" bolt with flat f& lock washers...wouldn't want it to come loose now...would you?
No...wait....drill a 3/8" hole & go down to your local hardware store & get a big ol' honkin'
Yale lock. It'll look like a saddle ring. Try not to lose the keys.
Just go find someone who uses a perforating gun and get one of the shaped charges from that. Anyone who knows that 2 joints make a stand, and that getting high doesn't involve substance abuse would know about a perforating gun. Or you could just not make all the old codgers around here have apoplexy in the first place.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
God knows they need one - but - only you have actually seen this dire need and had the forward thinking stance to bringing it to the masses. i don't think I would trust anyone who doesn't think they need a safety without one. Hunted with two guys like that - can you say accidental discharge. Make that two - one each.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...