Browning 1886 upgrade project

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
M. M. Wright
Advanced Levergunner
Posts: 4296
Joined: Wed Sep 15, 2010 12:57 pm
Location: Vinita, I.T.

Re: Browning 1886 upgrade project

Post by M. M. Wright »

Lookin' good Twoguns!
Thanks for keeping us posted. I'm lovin' it except now I just have to restock my old 1916 vintage 45-90.
Keep it coming.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
hfcable
Advanced Levergunner
Posts: 2502
Joined: Tue Sep 04, 2007 1:24 pm
Location: wasilla, alaska and bozeman, montana

Re: Browning 1886 upgrade project

Post by hfcable »

foxtrapper wrote:Every time I think I could do without a 1886 you guys posts things like this :D :D I started with modern Marlins ,I have a couple of custom 1895's, that I figured was enough. Those dang safety's and rebounding hammers keep me away. Beautiful rifle!!!
The browning 1886s don't have the tang safety or rebounding hammer. They were made in the 1980s so if u want to do a project they may be the best choice-if you can find one!
cable
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

hfcable wrote: The browning 1886s don't have the tang safety or rebounding hammer. They were made in the 1980s so if u want to do a project they may be the best choice-if you can find one!
That is why it took me so long to find my 1886.
A man on a gallopin' horse in the middle of the night would never know the difference.
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Browning 1886 upgrade project

Post by Pitchy »

twoguns wrote:
hfcable wrote: The browning 1886s don't have the tang safety or rebounding hammer. They were made in the 1980s so if u want to do a project they may be the best choice-if you can find one!
That is why it took me so long to find my 1886.
Bought mine new and still looks new, i`d be scared to death to try what you did. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
hfcable
Advanced Levergunner
Posts: 2502
Joined: Tue Sep 04, 2007 1:24 pm
Location: wasilla, alaska and bozeman, montana

Re: Browning 1886 upgrade project

Post by hfcable »

Pitchy wrote:
twoguns wrote:
hfcable wrote: The browning 1886s don't have the tang safety or rebounding hammer. They were made in the 1980s so if u want to do a project they may be the best choice-if you can find one!
That is why it took me so long to find my 1886.
Bought mine new and still looks new, i`d be scared to death to try what you did. :)
well, i didnt do it. i had a top flight custom gun smith [ in colorado ] do it for me. me do it? i sometimes loose the parts when changing a roll of toilet paper! :o :P :oops:
cable
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Browning 1886 upgrade project

Post by Pitchy »

If i had the talent to do what twoguns is doing i`d give it a go, or could afford to have someone else do it.
Took mine out of the safe yesterday and going to use it for a while.
Say you guys, my forearm is slightly loose on my Browning 86, what`s your recommendations to tighten it up. Can a person put some moisture in it somehow, it is in a very dry environment most the time. Can ya put some wood oil on it ?
Thanks
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

Pitchy wrote:. Can ya put some wood oil on it ?
Thanks
they come from the factory with an epoxy finish so I don't think you can get much moisture content in the wood. Maybe bedding it to the barrel with acraglass might tighten it up a bit.
A man on a gallopin' horse in the middle of the night would never know the difference.
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Browning 1886 upgrade project

Post by Pitchy »

twoguns wrote:
Pitchy wrote:. Can ya put some wood oil on it ?
Thanks
they come from the factory with an epoxy finish so I don't think you can get much moisture content in the wood. Maybe bedding it to the barrel with acraglass might tighten it up a bit.
Ok, i don`t want to hijack your thread i was thinking if ya put a little oil in the area where the wood goes into the reciever would swell it.
It just barely moves so probably no issue, we burn wood so it`s aweful dry in the house all winter.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

Do some reading up on Acraglass. If you are careful and follow the directions and use the release agent properly it will fix your loose forend. Google "Acraglass" and "bedding a barrel" or something like that.
A man on a gallopin' horse in the middle of the night would never know the difference.
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Browning 1886 upgrade project

Post by Pitchy »

Ok thanks. 8)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
TMair
Levergunner 2.0
Posts: 465
Joined: Mon Nov 15, 2010 10:11 am
Location: Utah
Contact:

Re: Browning 1886 upgrade project

Post by TMair »

Twoguns what I would like to know, not that I want to do it, is how did you form the lever, and keep the right shape without getting folds or wrinkles in it?
Terry
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

TMair wrote:... without getting folds or wrinkles in it?
Terry
It was quite PITA. I heated up only the general area that I wanted to shape using an acetylene torch with a 0-0 tip. I had a 1/2" drive 6" extension that I used to bend the lever. After it was red enough (and that is a judgement call), I would quickly turn off the torch and using both hands on the 6" extension, I would roll it on the hot part of the lever to bend it inward. this took a few times to get the lever "hoop" bent on top and bottom. then I had to heat up the front end of hoop to bend it downward to make the hoop fit the profile of the pistol grip. That was trial and error with cooling in between so I could handle the lever and assemble it into the receiver.
A man on a gallopin' horse in the middle of the night would never know the difference.
Dave B
Levergunner 3.0
Posts: 827
Joined: Mon Jun 16, 2008 1:12 am
Location: Arizona

Re: Browning 1886 upgrade project

Post by Dave B »

That is very nice work!!!

Dave B
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

I still need to put on a couple more thin coats of Tru-Oil. I took these pictures to show the color of the wood compared to the original epoxy finished Browning forestock.

Image
A man on a gallopin' horse in the middle of the night would never know the difference.
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Browning 1886 upgrade project

Post by Pitchy »

Sweet 8)
Do you know what the factory wood would look like if a person removed the finish and put tung oil or something similar on it.
The reason i ask is i don`t care for the factory finish on mine but the wood looks like it might show some grain so wondering what your thoughts are. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
hfcable
Advanced Levergunner
Posts: 2502
Joined: Tue Sep 04, 2007 1:24 pm
Location: wasilla, alaska and bozeman, montana

Re: Browning 1886 upgrade project

Post by hfcable »

twoguns wrote:I still need to put on a couple more thin coats of Tru-Oil. I took these pictures to show the color of the wood compared to the original epoxy finished Browning forestock.

Image
That finish is already approaching perfection to me, you are amazingly talented, tha rifle is a treasure,
cable
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

Pitchy wrote:Do you know what the factory wood would look like if a person removed the finish and put tung oil or something similar on it.
Yes. Take a look at the first picture of this thread. The upper rifle is my Winchester (Miroku) 1885 single shot in 45-90. It had an epoxy finish. I stripped it off with somekind of paint and epoxy remover and stained and refinished it with Tru-oil.
A man on a gallopin' horse in the middle of the night would never know the difference.
salvo
Senior Levergunner
Posts: 1509
Joined: Mon Sep 03, 2007 3:56 pm
Location: Vegas
Contact:

Re: Browning 1886 upgrade project

Post by salvo »

Most excellent workmanship twoguns!
ScottS

Image

"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

Got my parts back from Mike Hunter, Hunter Restorations, and I'm extremely happy with the CCH. Very nice colors. Now I will put the rifle back together and mount it in the checkering cradle. If you ever contemplate doing "stuff'" to an 1886 whether real Winny or Browning(Miroku) Talk with Mike. He aims to please and does excellent work. you can look back a few pages and see the before" picture.

Image

I also received my new front sight from MVA. It looks good on the barrel.

Image
A man on a gallopin' horse in the middle of the night would never know the difference.
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Browning 1886 upgrade project

Post by Pitchy »

Dang that`s going to look nice. 8)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
kimwcook
Advanced Levergunner
Posts: 7978
Joined: Tue Sep 04, 2007 10:01 pm
Location: Soap Lake, WA., U.S.A.

Re: Browning 1886 upgrade project

Post by kimwcook »

Oh, she's looking good, Twoguns. Come one man. Get that sucker twisted up. :D

I've got one of the Winoku's and that would get a great thing to do. I love CCH.
Old Law Dawg
User avatar
KirkD
Desktop Artiste
Posts: 4406
Joined: Sat Apr 07, 2007 6:52 am
Location: Central Ontario, Canada
Contact:

Re: Browning 1886 upgrade project

Post by KirkD »

That color case hardening by Mike Hunter is very well done, indeed. You have also done a gorgeous job on the wood.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
User avatar
pokey
Advanced Levergunner
Posts: 2704
Joined: Mon Feb 09, 2009 10:19 pm
Location: La center, wa.

Re: Browning 1886 upgrade project

Post by pokey »

WOW :!: :mrgreen:
careful what you wish for, you might just get it.

"BECAUSE I CAN"
User avatar
RIHMFIRE
Advanced Levergunner
Posts: 7694
Joined: Fri Sep 07, 2007 11:51 am
Location: Florida

Re: Browning 1886 upgrade project

Post by RIHMFIRE »

Very nice job on the wood...outstanding work....
and the case color is beautiful as well...
just as good or better than Turnballs...
You mentioned that Turnball was way to expensive for CC....
How do they compare to Hunter restorations cost wise?


We have a talented bunch of guys here....dont ya think!
LETS GO SHOOT'N BOYS
buckeyeshooter
Senior Levergunner
Posts: 1263
Joined: Mon Dec 17, 2007 7:57 pm

Re: Browning 1886 upgrade project

Post by buckeyeshooter »

great job!!
rbertalotto
Senior Levergunner
Posts: 1232
Joined: Thu Sep 17, 2009 3:45 pm
Location: Dartmouth, MA
Contact:

Re: Browning 1886 upgrade project

Post by rbertalotto »

Beautiful CCH..............Can you tell us what it cost to have all those pieces done.

I'm going the opposite direction. I have an old (1972) Marlin that I'm converting from cureve to straight. I have an octagon barrel but I need all the parts CCHed..........

Great work on the wood! Are you going to do the checkering or send it out.............I would have a heart attack if I tried to checker such a great stock and forend!
Roy B
Dartmouth, MA
www.rvbprecision.com
User avatar
KirkD
Desktop Artiste
Posts: 4406
Joined: Sat Apr 07, 2007 6:52 am
Location: Central Ontario, Canada
Contact:

Re: Browning 1886 upgrade project

Post by KirkD »

If Mike Hunter did that case color hardening himself, he did an outstanding job. I think those colors are more authentic to what Winchester used to put out, than some others I have seen.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

Gotta catch up:

First thank you all for your gracious comments on my project. That keeps me going in this somewhat unknown territory.

RIMFIRE@ rbertalotto: Mike's charges can be found on his website. http://www.hunterrestorations.com/pricing.html

KirkD: Mike did them himself and they are pretty. I have been watching Turnbull's, and all of the gun auctions sites. The colors here make me very happy. One note to future CCH candidates. The process seems to add a layer of "stuff" to the metal parts so clearances may be reduced. It took me a bit of fine finishing work to get everything to fit back together nicely.

rbertalotto: My heart attack begins. I have checkered a rifle and one pair of pistol grips years ago. They both came out good with the occasional overrun. I'm much more careful in my older years but my eyes are not as good. Anyway my confidence abounds. Checkering is somewhat tedious but it is just filing lines very carefully using Dembart tools and your eyes. There are good resources out there for the do it yourselfer. You got to take time and be very careful as I will on this project. You can see my pin points and scratch lines on the next few pictures to set out the outlines of the panels. Also a good support (checkering cradle) is important.

Checkering begins...

This is the big picture. I had to put it all together so the rifle could be securely supported in the checkering cradle.
Image

Forestock checkering outline:
Image

Grip checkering outline:
Image
Last edited by twoguns on Fri May 27, 2011 9:34 pm, edited 1 time in total.
A man on a gallopin' horse in the middle of the night would never know the difference.
User avatar
kimwcook
Advanced Levergunner
Posts: 7978
Joined: Tue Sep 04, 2007 10:01 pm
Location: Soap Lake, WA., U.S.A.

Re: Browning 1886 upgrade project

Post by kimwcook »

Twoguns, that is so cool. If you left off the checkering I think you'd still have a star.
Old Law Dawg
.45colt
Advanced Levergunner
Posts: 4772
Joined: Fri Sep 07, 2007 5:00 am
Location: North Coast of America-Ohio

Re: Browning 1886 upgrade project

Post by .45colt »

Wow,what a fine rifle You have built. :) .
rbertalotto
Senior Levergunner
Posts: 1232
Joined: Thu Sep 17, 2009 3:45 pm
Location: Dartmouth, MA
Contact:

Re: Browning 1886 upgrade project

Post by rbertalotto »

And just to make it hard on yourself, you choose a beautiful, but intricate checkering motif.................Yikes!

Can't wait to see the finished product............

I was at my local gun shop yesterday. They have an 1886 Take Down (Japan) in 45-70, but the wood is horribly plain and the blueing looks more like paint. They only want $1000 and it is in 99.9%.

If I could have the patience to do what you did, I'd buy it. But to have a new stock and forend made and CCH applied, it just gets tooo expensive........

I'm going to play with my Marlin 336 first........
Roy B
Dartmouth, MA
www.rvbprecision.com
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Browning 1886 upgrade project

Post by Pitchy »

She`s a beauty, i could easily live with it without checkering. 8)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
kenken0269
Levergunner 1.0
Posts: 69
Joined: Sun Jan 02, 2011 8:53 am
Location: NORTH TOLEDO BEND LAKE IN EAST TEXAS

Re: Browning 1886 upgrade project

Post by kenken0269 »

That is awesome. Can't wait to see it after the checkering.

kenken
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

rbertalotto wrote:And just to make it hard on yourself, you choose a beautiful, but intricate checkering motif.................Yikes!
Yep. You got that right. The typical angular patter would have been mucho easier. I strive to challenge me-self. Hence the motif you noticed. I will attempt it, make a few boo boos, but in the end I will make her look sweet!
A man on a gallopin' horse in the middle of the night would never know the difference.
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

Now I'm starting the really hardest part of this project.

Image
A man on a gallopin' horse in the middle of the night would never know the difference.
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Browning 1886 upgrade project

Post by Pitchy »

Scares me just looking at it :shock: looking forward to seeing it finished. 8)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
twoguns
Levergunner 1.0
Posts: 57
Joined: Mon Jan 18, 2010 12:45 pm
Location: Pagosa Springs, CO
Contact:

Re: Browning 1886 upgrade project

Post by twoguns »

Well, folks - She is finally shootable! It has been a long road traveled. My checkering was less than stellar during the final "turn" but it will work. I love the look of this Browning Miroku 1986 run made into a pistol grip stock with none of the later Winny baggage. Next I need to work out slings that will not mar the rifle. then there is target time and reloading. Thanks for your interest in this project.

Image

Image

Image

And last my favorite. That wonderful MVA front sight installed.

Image

Image
A man on a gallopin' horse in the middle of the night would never know the difference.
User avatar
KirkD
Desktop Artiste
Posts: 4406
Joined: Sat Apr 07, 2007 6:52 am
Location: Central Ontario, Canada
Contact:

Re: Browning 1886 upgrade project

Post by KirkD »

Absolutely gorgeous! I especially like the fact that you went for fine checkering.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
.45colt
Advanced Levergunner
Posts: 4772
Joined: Fri Sep 07, 2007 5:00 am
Location: North Coast of America-Ohio

Re: Browning 1886 upgrade project

Post by .45colt »

All I can say is Wow. :mrgreen: . What a Fine Job.
User avatar
JReed
Advanced Levergunner
Posts: 5509
Joined: Tue Apr 03, 2007 11:17 am
Location: SoCal

Re: Browning 1886 upgrade project

Post by JReed »

Holy Smokes! That came out beautifully. :mrgreen:
Jeremy
GySgt USMC Ret

To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
User avatar
Malamute
Member Emeritus
Posts: 3781
Joined: Tue Apr 03, 2007 8:56 am
Location: Rocky Mts

Re: Browning 1886 upgrade project

Post by Malamute »

Looks great! You did a good job on everything, and the work you sent out was very well done.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-

Isnt it amazing how many people post without reading the thread?
M. M. Wright
Advanced Levergunner
Posts: 4296
Joined: Wed Sep 15, 2010 12:57 pm
Location: Vinita, I.T.

Re: Browning 1886 upgrade project

Post by M. M. Wright »

twoguns,
What a fine rifle! Outstanding job and thank you so much for sharing all this with us. I know many of us have followed this job the whole way. I''m inspired.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
User avatar
kimwcook
Advanced Levergunner
Posts: 7978
Joined: Tue Sep 04, 2007 10:01 pm
Location: Soap Lake, WA., U.S.A.

Re: Browning 1886 upgrade project

Post by kimwcook »

That rifle is absolutely gorgeous. You should really feel proud of a job well done. I'am truly impressed. A family heirloom for sure. What I wouldn't give for my grandfather to have made something like that and it ended up in my hands. A real work of art.
Old Law Dawg
salvo
Senior Levergunner
Posts: 1509
Joined: Mon Sep 03, 2007 3:56 pm
Location: Vegas
Contact:

Re: Browning 1886 upgrade project

Post by salvo »

Beautiful rifle & excellent craftsmanship!
ScottS

Image

"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
User avatar
Pitchy
Advanced Levergunner
Posts: 13146
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Browning 1886 upgrade project

Post by Pitchy »

Awesome, when do ya want me to send ya my 86 :mrgreen:
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
foxtrapper
Levergunner 2.0
Posts: 420
Joined: Wed Sep 12, 2007 9:45 am
Location: Long Island N.Y.

Re: Browning 1886 upgrade project

Post by foxtrapper »

WOW..... a "instant" heirloom. That is a beautiful rifle.
User avatar
pokey
Advanced Levergunner
Posts: 2704
Joined: Mon Feb 09, 2009 10:19 pm
Location: La center, wa.

Re: Browning 1886 upgrade project

Post by pokey »

Pitchy wrote:Awesome, when do ya want me to send ya my 86 :mrgreen:
where's the line start? [ i would have to go buy the '86 first though :lol: ]
careful what you wish for, you might just get it.

"BECAUSE I CAN"
buckeyeshooter
Senior Levergunner
Posts: 1263
Joined: Mon Dec 17, 2007 7:57 pm

Re: Browning 1886 upgrade project

Post by buckeyeshooter »

very nice work! :D
User avatar
kimwcook
Advanced Levergunner
Posts: 7978
Joined: Tue Sep 04, 2007 10:01 pm
Location: Soap Lake, WA., U.S.A.

Re: Browning 1886 upgrade project

Post by kimwcook »

I've got an '86. It's a Winoku, but I have the Browning conversion parts. :mrgreen:
Old Law Dawg
User avatar
Old Savage
Posting leader...
Posts: 16793
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Browning 1886 upgrade project

Post by Old Savage »

How did I not come across this? Great job! You have a lot of nerve. It's all yours now.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
Post Reply