Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Nicknack
Levergunner 1.0
Posts: 91
Joined: Sat May 15, 2010 5:44 pm
Location: Queensland Australia

Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by Nicknack »

I have just taken possession of my rebarrelled Marlin Cowboy 44 Magnum with a 26 1/2'' Green Mountain octagon barrel blank with a 1 in 26 twist and a grove diameter of .430,it will take 14 rounds but I will only load her with 10. .I asked the Gun Smith to leave the rear sight dovetail uncut ,I reckon it looks real sexy without the rear barrel sight!(which I never use)
The original Marlin 24'' barrel was made to the top tolerance of .4335 and I couldn't get it to shoot a decent group at all.I'm about to head to the range and break her in and see what she can do.
Regards Dallas in OZ.
Marlin .44 Magnum.JPG
Marlin .44 Magnum Cowboy 004.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by Nicknack on Wed Jul 14, 2010 4:15 pm, edited 1 time in total.
It's dead easy to die; it's the keeping on living that's hard - Douglas Mawson - Scientist and polar survivor
Terry Murbach
Shootist
Posts: 1682
Joined: Sun Dec 09, 2007 7:46 pm
Location: BLACK HILLS, DAKOTA TERRITORY

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by Terry Murbach »

SAY NOW, THAT LOOKS PRETTY DARNED COOL FROM HERE !!
RIDE, SHOOT STRAIGHT, AND SPEAK THE TRUTH
User avatar
O.S.O.K.
Advanced Levergunner
Posts: 5533
Joined: Sun Apr 27, 2008 4:15 pm
Location: Deep in the Piney Woods of Mississippi

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by O.S.O.K. »

Purty. Well done! I like it.
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
dr walker
Senior Levergunner
Posts: 1194
Joined: Wed Sep 19, 2007 9:44 am
Location: southwest Florida

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by dr walker »

Nice looking rifle.
User avatar
AJMD429
Posting leader...
Posts: 32195
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by AJMD429 »

Nice setup. Can't wait for the Range Report...!
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
User avatar
J Miller
Member Emeritus
Posts: 14885
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by J Miller »

I'll bet it shoots like a lazer. Looks great too.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
User avatar
kimwcook
Advanced Levergunner
Posts: 7978
Joined: Tue Sep 04, 2007 10:01 pm
Location: Soap Lake, WA., U.S.A.

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by kimwcook »

That's one nice looking rifle. Hope to hear it shoots like a house a fire.
Old Law Dawg
User avatar
pokey
Advanced Levergunner
Posts: 2704
Joined: Mon Feb 09, 2009 10:19 pm
Location: La center, wa.

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by pokey »

nice :wink:
careful what you wish for, you might just get it.

"BECAUSE I CAN"
User avatar
TedH
Advanced Levergunner
Posts: 8250
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by TedH »

Very nice! :mrgreen:
NRA Life Member
User avatar
Ysabel Kid
Moderator
Posts: 27893
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by Ysabel Kid »

That is just too cool! 8)
Image
.45colt
Advanced Levergunner
Posts: 4736
Joined: Fri Sep 07, 2007 5:00 am
Location: North Coast of America-Ohio

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by .45colt »

Thats one fine job.Nice Marlin.
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by Pete44ru »

Pretty nice - what did you use for the longer magazine tube ?

.
dwight
Levergunner
Posts: 28
Joined: Wed Oct 10, 2007 7:03 am
Location: NW Arkansas
Contact:

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barr

Post by dwight »

:wink:
Last edited by dwight on Mon Dec 31, 2012 1:27 am, edited 1 time in total.
Nicknack
Levergunner 1.0
Posts: 91
Joined: Sat May 15, 2010 5:44 pm
Location: Queensland Australia

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by Nicknack »

Thanks for all your comments.
Pete44ru I extended the magazine tube by using an old Winchester model 94 30-30 Mag tube.My best mate is a Refrigeration Fitter(technician) and we heated up the end of the Winchester tube and expanded the end with a pipe expander whilst it was cheery red and kept the fit nice and tight and just hammered them into on another then trimmed the extended magazine with a tube cutter and finished to final size in the lathe.Filed a flat on the expanded section so as to fit under the barrel and it works a treat!
Last edited by Nicknack on Sun Jul 11, 2010 4:14 pm, edited 1 time in total.
It's dead easy to die; it's the keeping on living that's hard - Douglas Mawson - Scientist and polar survivor
User avatar
RIHMFIRE
Advanced Levergunner
Posts: 7654
Joined: Fri Sep 07, 2007 11:51 am
Location: Florida

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by RIHMFIRE »

thats really a nice shooter
LETS GO SHOOT'N BOYS
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by Pete44ru »

Thanks for the explaination, on how you made the extended magazine tube - It's a nice job, one to be proud of !

.
MrMurphy
Senior Levergunner
Posts: 1947
Joined: Mon Jan 19, 2009 12:32 pm

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by MrMurphy »

Trying to hit the Phillipines with that thing? :mrgreen:


I have a .44 Marlin carbine, it's a nice shooting piece.
Birdman
Levergunner 3.0
Posts: 914
Joined: Tue Dec 18, 2007 4:01 pm
Location: Central Illinois

Re: Marlin 44 Magnum Cowboy with a new 26 1/2'' octagon barrel

Post by Birdman »

I always liked the long barrel on the 45/70 Cowboys. This is one sweet rifle.
Post Reply