OT- CAR WAX ?'s and How to deactivate Naval Jelly
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- J Miller
- Member Emeritus
- Posts: 14885
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
OT- CAR WAX ?'s and How to deactivate Naval Jelly
I've been parking my white Nissan under a nice big shade tree most of the summer. Much cooler and easier on the vehicle. Except for the fact this stupid tree dripped gunk all over it.
I just "SCRUBBED" the entire vehicle this afternoon. Took me two hours by hand. I used special Armorall soap for cars with clear coat paint but that didn't touch the tree gunk. Ended up having to use one of them kitchen sponges with the green scrubber on the back. Gently of course, but it got the job done.
Now, after I get done with the touch up paint and some rust repair I want to put a coat of good wax on it.
The only wax I have is KIT Carnuba wax. But the instructions say not to use it on decals and metalized plastic. My vehicle has both.
So what wax would you suggest? I used to use the Johnson Paste wax that came in the big tin with the applicator sponge. That was fairly easy to use. But I don't know about decal issue.
I also have some minor (now) rust to deal with. It's on the bottom of the passenger door right at the water drain. If I use Naval Jelly I can get rid of the rust then prime and repaint the small area. It would be practically invisible.
In a thread about rust on which forum I do not remember, someone commented you needed to use something to deactivate the Naval Jelly.
Water wouldn't do it. But I don't remember what it was, or which forum this thread was on.
Any body remember this?
Joe
I just "SCRUBBED" the entire vehicle this afternoon. Took me two hours by hand. I used special Armorall soap for cars with clear coat paint but that didn't touch the tree gunk. Ended up having to use one of them kitchen sponges with the green scrubber on the back. Gently of course, but it got the job done.
Now, after I get done with the touch up paint and some rust repair I want to put a coat of good wax on it.
The only wax I have is KIT Carnuba wax. But the instructions say not to use it on decals and metalized plastic. My vehicle has both.
So what wax would you suggest? I used to use the Johnson Paste wax that came in the big tin with the applicator sponge. That was fairly easy to use. But I don't know about decal issue.
I also have some minor (now) rust to deal with. It's on the bottom of the passenger door right at the water drain. If I use Naval Jelly I can get rid of the rust then prime and repaint the small area. It would be practically invisible.
In a thread about rust on which forum I do not remember, someone commented you needed to use something to deactivate the Naval Jelly.
Water wouldn't do it. But I don't remember what it was, or which forum this thread was on.
Any body remember this?
Joe
- J Miller
- Member Emeritus
- Posts: 14885
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Junior,
That "white" stuff is a chemical that the Illinois Dept of Homeland Security sprays on the ground so they can track everybody. They do it once every year to check the migration of the local inhabitants.
WD-40 huh? Why didn't you tell me this before I spent two hours scrubbing the thing. Probably ruined the paint too.
Joe
That "white" stuff is a chemical that the Illinois Dept of Homeland Security sprays on the ground so they can track everybody. They do it once every year to check the migration of the local inhabitants.
WD-40 huh? Why didn't you tell me this before I spent two hours scrubbing the thing. Probably ruined the paint too.
Joe
- J Miller
- Member Emeritus
- Posts: 14885
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Rubbing alcohol, that might work, only I'd get drunk on the fumes. Weeeee
Turtle wax bug and tar remover, that sounds like something I should buy to keep on hand.
I'd not use the Naval Jelly either, except the part that's got the rust is a vertical surface and I don't think vinegar would stick long enough to deal with the rust.
Joe
Turtle wax bug and tar remover, that sounds like something I should buy to keep on hand.
I'd not use the Naval Jelly either, except the part that's got the rust is a vertical surface and I don't think vinegar would stick long enough to deal with the rust.
Joe
My 90 year old neighbor Miss Marie taught me to take the Oak crud off our cars with bleach. Works fast.
Naval Jelly is acid. Baking soda will neutralize it.
Naval Jelly is acid. Baking soda will neutralize it.
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
-
- Levergunner 2.0
- Posts: 349
- Joined: Thu Sep 13, 2007 5:28 pm
- Location: Stockton, CA.
-
- Levergunner 2.0
- Posts: 173
- Joined: Thu Sep 13, 2007 4:01 pm
- Location: New England