
Finally did it
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 2.0
- Posts: 345
- Joined: Sun Dec 09, 2007 6:02 pm
- Location: Mountain View California
Finally did it
Yesterday I bought my first RBH in .45 Colt, first time for both model & caliber. It is a very different experience than the .357 mags that I have used over the years. I am looking for some sharing of wisdom from those who use this combination ( ie, good general carry ammo, cast bullet reloading choices etc) any info would be much appreciated. 

-
- Levergunner 2.0
- Posts: 237
- Joined: Mon Sep 03, 2007 7:37 pm
- Location: Indiana
IMHO: The RBH in .45 Colt is the "original" .45 Magnum - if you so desire. I know it doesn't pre-date the .454; but the .454 was available only in custom, and quite expensive revolvers. Now days, I find the .45 Colt much more desirable in loadings somewhere between the magnum level and the standard .45 Colt level.
The 250-255 cast bullets at 1100 to 1200 fps and the 300 bullets at 950 to 1000 fps are about the most I desire - or need. Actually, for deer hunting one does not need any more than a 250-255 at 850-900 fps - at least I haven't found a deer in Indiana that could stop one at that velocity. I once, many, many years ago, shot a deer with a 300 grain cast bullet at only 750 fps. That particular deer could not stop that bullet, either.
The top load I have ever fired from one of these Rugers was a Golden Bear 300 grain at a chronographed 1350 fps from a 4 5/8" stainless BH. Gunsmith Larry Cooper and I fired hundreds of these rounds when testing the Golden Bear Bullets back in the early 90's. That revolver was not damaged by these loads and is still going strong!
Enjoy your .45 RBH.
Grace and Peace,
The 250-255 cast bullets at 1100 to 1200 fps and the 300 bullets at 950 to 1000 fps are about the most I desire - or need. Actually, for deer hunting one does not need any more than a 250-255 at 850-900 fps - at least I haven't found a deer in Indiana that could stop one at that velocity. I once, many, many years ago, shot a deer with a 300 grain cast bullet at only 750 fps. That particular deer could not stop that bullet, either.
The top load I have ever fired from one of these Rugers was a Golden Bear 300 grain at a chronographed 1350 fps from a 4 5/8" stainless BH. Gunsmith Larry Cooper and I fired hundreds of these rounds when testing the Golden Bear Bullets back in the early 90's. That revolver was not damaged by these loads and is still going strong!
Enjoy your .45 RBH.
Grace and Peace,
Pastordon
Pastordon's Blog
The man who thinks he knows something does not yet know as he ought to know. (1 Cor. 8:2)
Pastordon's Blog
The man who thinks he knows something does not yet know as he ought to know. (1 Cor. 8:2)
- Ysabel Kid
- Moderator
- Posts: 28743
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
The .45Colt is lots of fun, and very overlooked and underrated. It is great fun no matter what you are interested in, if you are using an appropriate gun for sure.
1. You can plink with cowboy loads.
2. You can bump your loads up to 800-900 fps for plinking, or even for hunting.
3. You can load JHP's with a stout charge of 296 and get the equivalent of .44mag loads
4. You can load 300 grain JHP's or hard cast bullets up to 340 grains or so and exceed .44mag power.
1. You can plink with cowboy loads.
2. You can bump your loads up to 800-900 fps for plinking, or even for hunting.
3. You can load JHP's with a stout charge of 296 and get the equivalent of .44mag loads
4. You can load 300 grain JHP's or hard cast bullets up to 340 grains or so and exceed .44mag power.