Paco Kelly's Leverguns.com

tattoo13

Tried calling and sent an email, hoping he may see this!

A great gun stopped by a bubba hand on a screw.

tattoo13

Rossi 92 it is called the locking bolt pin screw and in this diagram is #43:

I will gladly reimburse anyone who can find one!!

Thanks,
Jason

tattoo13

Well he bought it and it is smooth as butter, I wish my new Rossi was close to it.
Got to load up a bunch of 357's and see how it shoots.

tattoo13

Thanks, that is newer than we thought.
Maybe Nate will come along and narrow it down a bit.

tattoo13

A friend is trying to buy this and was told it was somewhere between 84-86.
Serial number is K-088878 it is a .357, we are just trying to pin down the manufacture date.

Thanks for any help in advance.

tattoo13

If that won't get it done, you better be able to call in an airstrike!

tattoo13

It looks pretty banged up, can it be fixed and rideable ? Best I can tell is it is just the forks and clamps. The frame looks straight, but I have to tear it down, measure it and straight edge it. If it is dead I don't know what I will do, either part out what I can and sell the rest for scrap, or ...

tattoo13

I actually lost the front end on gravel in a blind curve, the bike and I slid across the road and into a guardrail (separately).

I had 6 broken ribs and a new plate with 13 screws in my wrist, but I am on the up side now, and will hopefully be back to work in a week!

tattoo13

I had my modem die and being out of work for a couple months from my wreck it was not a priority to get fixed, but it is now and it is nice to be able to have some entertainment! I finally got to my motorcycle and looked it over good. Makes me sad to see it so beat up, it has been my companion for a...

tattoo13

The mount looks good, one suggestion I would make is to use counter sunk holes and tapered screws. Might help keep it a little more solid.

tattoo13

Ranch Dog wrote:Handirifle, I thought I would add that I evaluated all the current production scout rifle scopes, through purchase, but settled on the Weaver.

Did you compare it to the Leupold FX?

tattoo13

Thanks!
Just the info I was looking for!!

tattoo13

With all the time I have on my hands I have been doing some gun trading. Now I have a shot at a T/C Icon or maybe a Tika, I don't know a lot about either, but it seems the T/C Venture had some bad reviews but the Icon was well received and the Tika is overall liked. Both are .243's, and if I can wor...

tattoo13

That is a dream hunt right there!

tattoo13

My jacket split a seam and I have a small patch on my forearm, but very superficial. My pants gave out on the knees and I had some good rash on them, but otherwise the clothes did their job. I have three ribs broken under the shoulder blade from impacting the guardrail support and three in the front...

tattoo13

Front end is bent, once I get out of the cast I am going to put it on blocks and level it out and start measuring the frame, if it is straight I plan on replacing the forks and trees. I honestly don't know how bad the side it slid on is, but the guy who hauled it said nothing was too bad. Who knows,...

tattoo13

I don't have an issue with a sales person who does not know, but I hate those that insist that they are right when they are wrong, or ones that like to lie to customers. I heard one at a little pawn shop that was telling a guy looking at a rifle that he was shooting 1" groups at 300 yards with ...

tattoo13

I am laid up from wrecking my bike. I caught a patch of dirt in a blind corner and lost the front end. I was doing fine sliding across the road until I found a guardrail. 6 broken ribs and a new plate and 13 screws in my wrist. Thank God I learned the helmet lesson years ago and wear a full face hel...

tattoo13

Awesome story, I choked up a little.

tattoo13

Come on Ji; I wouldn't eat a hotdog if there was no ketchup on the bun... Grilled: ketchup, mustard, relish, fresh onions if available. :| To qoute Clint Eastwood in the movie Sudden Impact :D "Nobody, I mean nobody eats ketchup on a hot dog" LOL Bob Good posting!! I am an old Chicago boy...

tattoo13

I just bought a Rossi 92 in 357, what parts do you consider likely to fail over years of use?
Also how are prices for parts and shipping from Rossi?

tattoo13

Most drip coffee makers do not get hot enough, they run 160-180. Coffee is best brewed at 200 degrees, the flavor really comes out of the grounds. My favorite way to brew is a french press, every coffee drinker I know that has tried coffee out of my french press has started shopping for their own. :D

tattoo13

Wish I could plat with one of those marbles sights, I am usually an aperture sight guy, and it looks like it may work for me.

Though I have a couple skinners right now and I really like them, so the skinner barrel mount is very tempting.

Thanks for the link, it gives me more to think about.

tattoo13

Sitting here banged up from wrecking a motorcycle and I have a Rossi 92 16" .357 ordered, just waiting for it to show up. I know from playing with other people's 92's I don't like the stock sights. I am trying to decide between the Skinner Barrel Mount Peep and the one from Steve's Guns that mo...

tattoo13

My hunting rig, and field work rig.
Finally let me down, the fuel pump went out. I have to get one this weekend.

tattoo13

Sharptop wrote:Get a tennis ball cut a small hole in it, put it against the keyhole and whack it. It will pop the lock.
http://www.youtube.com/watch?v=MNaSTipOYy8

Does not work.
Try it.

tattoo13

Never needed the Gov to tell me whether I could carry a gun or not...

tattoo13

Consider me in!

tattoo13

I have a custom 336, used it for deer, coyotes and armadillos hammers deer just like my other 336. I likes 170gr CoreLokts. Easy in and out of the truck, easy to swing and shoot out the window (armadillos and coyotes). I love it enough I keep thinking of paying for my Guide Gun to get cut down. http...

tattoo13

If you decide to go with the KelTec disassemble and completely deburr all the metal. The KelTec 380 is a great little piece, but their finishing is not always top notch. A little bit of smoothing goes a long way on them. If you don't want to mess with it, spend a few more bucks and get the Ruger LCP...

tattoo13

I called Marlin/Remington about the GBL I just got. There is a spot on the wrist where the laminate is lifted, I asked if I could send it in or just get a new stock. I was told they have shut down production on that line and I could send it in and they would get to it when production resumed or I co...

tattoo13

Does the person you bought it from have a web site.

tattoo13

One of the big pushes for new buildings is the Government's push for building and fire codes. We tried to open a shop in a cool old fire station and we had so much we had to update and bring up to code before being able to open a new business it was cheaper to tear down the old building and build a ...

tattoo13

I run a Service Department for a Kubota Dealer, if you have any questions or need anything drop me a line.

tattoo13

Funny, Dog is half blue and half red, but other than some black hairs running in her coat she looks red.

tattoo13

I have a Red Heeler, I always liked the blue coloring better, but when I saw her in the pen I couldn't leave her there. Smartest darn dog I have ever had. For those that do not know they tend to be a one person dog, and dog barely listens to my wife. So in turn my wife refers to her as "your st...

tattoo13

Man I must be a easy to please person, I just want a Marlin 1894 Trapper in .357, and a new model Vaquero 4 5/8 .357 to go with it.

Would make me a happy bear.

tattoo13

I think for the first time in 20 years my 336 .30-30 will not be hunting with me. My son turned 9 and is big enough to shoulder it and shoot it well. I decided to let him carry it and I went and bought myself a 1895 in .45-70 :D I am actually pretty excited to get out in the woods with it, but I don...

tattoo13

Never got into a bad situation and wished I had a smaller gun

tattoo13

Email sent, thanks!

tattoo13

It seems there are a bunch of Ranch hands out there for sale, but the carbines are absent.
I am looking for a 357 16" barrel for my son, I would like one soon so he can get good with it before hunting season.

tattoo13

I emailed Henry last night and this morning Mr. Imperato sent me an email asking that I send the rifle to them.
He even offer to send me a UPS return label.
What great customer service!

tattoo13

For work around the house the hydro is very nice, getting in and out of small areas and working close to things is a lot easier than with a clutched model. In the 8+ years I have worked on Kubotas I have only had to fix one Hydrostat trans, and that was a badly abused tractor. I have only been into ...

tattoo13

I will definetly contact Henry tomorrow.
I took the rifle out and just to verify, if I shoot it without holding the lever closed it will open a little.
The lever ends up about 3/4" down from it's uppermost point.

tattoo13

Something else that I noticed, when I close the lever just at the end of the lever throw I get a click.
Not sure what that is but I am pretty sure that is not normal.

tattoo13

I am holding it as Hobie said.
When I shoot it feels like the handle is trying to open. The best I can figure is the bolt is moving back and trying to open the lever.
And yes it is a .22, I don't have a secret source for ammo.

tattoo13

I can feel the lever bumping back against my hand when I shoot kind of like the bolt is not locking in to battery and getting pushed back making the lever try to open.

tattoo13

I work for a Kubota dealer and they are great tractors in that price range you should be able to get a L2800 with a loader and if you are patient Kubota will do 0% financing. If you are willing to take a road trip we have a very nice Mahindra with a BushHog loader they are asking $12,900, we also ha...

tattoo13

It is a H001 and I am shooting cheap bulk Remington ammo.
When I shoot it the lever jumps, it is not horrible, but it is distracting.
Is this normal?

tattoo13

Is there a link to where a guy could buy one of these calendars?

Search found 57 matches