Paco Kelly's Leverguns.com

levers

I'm going to be buying one of the Providence Tool copies of the Lyman 21. I posted in the classifieds to see if anyone might have a one laying around that they aren't going to use. But, if I end up buying a new one, where would you suggest I buy it from. I have found two places on line for about the...

levers

I like the 1895 src and the shorter barrel guns but in general, the 1895 is not a very pretty gun to my eye. The 28" barrels are definitely not to my liking and I have carried a few of them. There were quite a few made but, as I recall, about 75% were Russian military rifles. I think the commer...

levers

[quote="Malamute"]From what Mike said, it may be relatively easy to adapt it to the 92. Most of the hard work is done, shortening it to the correct length and rechambering it, and perhaps the extractor cut. Unless it would be more practical to sell the 73 barrel and get a 92 barrel, or hav...

levers

Thanks Mike. It is a 32-20. Appreciate the help.

levers

I've got an old, beat up Winchester 1892 rifle that has a completely shot barrel on it. I have a decent Winchester 1873 barrel that's been laying around here for years. Will the 1873 barrel work on the 1892 action without having to do anything to it?

Thanks for any help

levers

Highly unlikely that gun came with a bolt peep as it has a serial number above 45,000 and the use of that sight ended much earlier. With the popularity of the bolt peep, I would bet someone swapped bolts or, perhaps, had one added to the original bolt.

levers

Thanks. I'll PM the info over to KimWCook.

I appreciate the help.

levers

Hey, are any of you guys members of the ShilohRifles.com forums? There's a guy there that I'd like to get a message to but I have tried and tried to register but the site never activates my membership. Any help would be appreciated?

levers

Years ago, I got 2 model 71's from a guy who said he'd sent them PO Ackley to "improved". One was the 348 Ackley Improved and the other was a 375 cal/348. He had reloading dies for both and the reloading data for the 375 was the "375 Payne Express". I never shot them much. I did ...

levers

I think Y K hit it on the head. Use a bleach solution to kill the odor. In areas where the bleach will ruin a carpet or fabric, you have to work up from a low concentration. A 5% bleach & water mix should do at least some good....and may completely fix "light areas"......in saturated s...

levers

I'll put up a Winchester plastic buttplate. It came off an older gun but I'm not sure what model it is intended to fit. It is 4 5/8" long and 1 3/8" wide. The hole spacing is about 3 1/8 center to center. I has the older style Winchester repeating arms logo in the center of it.

levers

[quote="bsaride"]Two boxes Remington 6mm Rem 80 gr PSP posted.[/quote]

Hey
I can use the 80 gr psp's if still available. Let me know and I'll dig up something to post.
Thanks

levers

Almost all of the best habitat in AZ in public land. It would be pretty hard to keep any significant population secret. I have had several guys tell me that they've seen them (or some odd cat) in southern AZ.....but most were recovering from a night's drinking. A lot of cats seem to show up once the...

levers

The dealer was wrong. I can't believe you bought from his wholesaler. I have tried to buy from wholesalers before and, in my experience, they would not deal with a retail buyer. They required that I have an account to order from them. If this shop is buying from a wholesaler who sells to the public,...

levers

A few years ago, we read an article in the local newspaper of a company that was gathering groups of senior citizens and using a bus to drive them to the Mexican border so that they could cross and buy prescription drugs. The bus ride was about 3 hours and they were doing an all day trip there and i...

levers

That's a good one. But, why add the Redfield line to their existing, and, to me, seemingly crowded, product line? If hitting a lower price point was the objective, what is the purpose of the Rifleman?

levers

It's good to see Redfield back but I'm a little confused as to what Leupold's strategy is here. In the moderate to low end of their product line, they now have VX-3, VX-2, VX-1, Rifleman, and, now, Redfield. What are they trying to accomplish?

levers

I use the Leupold and Nikon Monarch scopes. Used to be Nikon couldn't be trusted on their warranty support but that's supposed to have changed. I haven't had any warranty issues with the Nikons so I don't know how good their warranty support it. I do know Leupold's is second to none. The Monarch opt...

levers

Do any of our Australian members know of R A Bishop Company? They have an item I want to order......just want to make sure they are legit.

levers

I knew you'd appreciate that....

levers

Never mind....a little nail polish remover and a liberal oiling afterward took care of it.

levers

I just got an original Winchester 71. It's a nice gun that at some point, someone put a little extra varnish on the wood. The wood is fine but they applied the varnish with the wood still on the gun and there are a couple spots where there's a little of the varnish is on the metal. I'd like to remov...

levers

I've never purchased from Bill Goodman but there was a posting a while back from one of our board members who had an unpleasant experience with Mr. Goodman that ended up costing him about $1500 (if I remember the amount correctly). The buyer wanted to return the gun and Goodman would not honor a ful...

levers

I'll offer up a set of Weaver bases for the Sako rifles. These slide onto the Sako dovetails and allow the use of Weaver Rings on Sako rifles.

levers

Hi Alnitak
I'll say dibs on the cards if they're still available.....

Confirm and I'll PM address and post my offering.
Thanks
Levers

levers

I kind of like the Jap 99 in 7.7. Easy to reload and VERY strong. Mine is quite accurate. It liked the old Remingon bulk 215gr .313 diameter (I can't find them anymore) and it does pretty good with the .312 diameter bullets too. I don't know how cheap they are anymore. Usually the cheapest ones are ...

levers

Maybe get someone with a C&R license to write a letter and attach their license to it to show their expertise. Maybe that would be enough. Some pre-break pictures would probably help too. You could get some info from Gunbroker on what similar guns sold for too.

levers

I know H450 isn't an optimum powder for the 32 Win Special but I've got a ton of it. So, I try to use it whenever I can. I have not been able to find any loading data for the 32 Win Special using H450. I have been using H450 in the 30-30 for quite some time. I thought that the 30-30 data might be cl...

levers

Thanks. I've seen the cases around and pretty reasonably priced too. I was going to buy some but I just thought about the several hundred extra 30-30 cases I've got...and figured that I might use some of them if it's reasonable to do so.

levers

Can 32 Win Special cases be made by running 30-30 cases through a 32 Win Spec full length sizing die?

levers

PM sent to Dajudge....

levers

I sent my address on the compass back when it was first posted a month or so ago....it still shows in my "outbox". I sent a follow up PM but I've never heard back.

levers

I've got an older Winchester 94 that needs a replacement stock. I'd like to find a nice original stock to put on it. Since I'm sure I'll have to find it via the internet, I want to make sure that I don't buy a stock that won't fit. My gun was made around 1930. Will any pre-64 stock fit it? If there ...

levers

BSARIDER
Got the scale and dies/stuff today. They're great. Many thanks.

levers

Thanks Yance...I got the measure today. Looks great!

levers

Winchester 94 tube to Dajudge

levers

I'll offer up two magazine tubes. One is off a Winchester 1894 and it is 15.375" long GONE. I'm not sure what the other is off of but it appears to be Winchester 1886 size and it is 21.625" long. GONE Both are old magazines...the 1894 has 4 small notches on the bottom side. The 1886 size m...

levers

I could use the compass if it's still available. Thanks

levers

JeffG....I think that sounds way too generous.

levers

Hi Travis
You got the sight and release. PM an address to me.

levers

You've got the Lee Loader, Old Max. PM me your address.

levers

I've got a glove I used to use (I think it's a golf glove) and an arm guard that's pretty well used but you're welcome to them

These are on their way to BSARIDE

levers

I'll offer up a Pro Line bow sight and mechanical wrist release. Used but in decent shape. The Pro Line has 6 pins. I think I had it mounted on a PSE Mach Flight 4. GONE

levers

Hi Yance
I could definitely use the powder measure so I'll call dids if it's still available.

Thanks

levers

Another suggestion might be to sleeve the chamber and reline the barrel. I don't know anything about the 43 but I've seen that done on other guns chambered for similarly powered cartridges.....

levers

Thanks Jay. Here are a couple items

1. Lee Loader for the 308. GONE

2. Leather holster with a light pencil mark "S&W K Masterpiece" on the back side of the holster. It's been used some but it looks like it still has quite a few more miles in it. GONE

levers

If they're still available, I'll say dibs on the RCBS 10-10 and 30'06 dies.

Let me know and I'll get my items listed!

levers

Hi OI
No problems. I didn't realize that they were spoken for. I should have read your posting more carefully.

levers

If the 444 dies are still available, I'd say dibs on them. Let me know if they are and I'll come up with my offering.

levers

No, it pretty much looks like the one at this link but it does not have the patent date or W1 mark.

http://cgi.ebay.com/RARE-NICE-MARBLES-W ... dZViewItem

Search found 67 matches

Providence Tool Sights

Re: Why didn't the '95 sell better?

Re: Will a Winchester 1873 barrel work in a Win 1892 action?

Re: Will a Winchester 1873 barrel work in a Win 1892 action?

Will a Winchester 1873 barrel work in a Win 1892 action?

Re: Winchester 71 trivia question

Re: Is anyone here a member of the ShilohRifles.com website?

Is anyone here a member of the ShilohRifles.com website?

Re: .375 Wildcat, mod. 71

Re: OT Need help, nasty cat urine

Re: PAY IT FORWARD

Re: PAY IT FORWARD

Re: OT - Jaguar in Arizona

Re: Please tell me if I'm wrong re. dealer

Re: Where to go in Mexico for meds?

Re: American-made Redfield scopes are back!

Re: American-made Redfield scopes are back!

Re: What varmint scope do you recommend?

R A Bishop in Australia

Re: How do you get Varnish off Metal/Blueing?

Re: How do you get Varnish off Metal/Blueing?

How do you get Varnish off Metal/Blueing?

Re: Suggestions for picking up a Win. 73

Re: PAY IT FORWARD

Re: PAY IT FORWARD

Re: OT - what milsurp rifle under $200 makes the best hunter?

Re: #$#%&%$@# UPS!!!

Loading Data for 32 Win Special using H450

Re: 32 Win Special Cases

32 Win Special Cases

Re: PAY IT FORWARD

Re: PAY IT FORWARD

Question on Winchester 94 stocks