Browning 1895
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 2.0
- Posts: 173
- Joined: Thu Sep 13, 2007 4:01 pm
- Location: New England
Browning 1895
This rifle followed me home after looking and handling it 2 different time's in a 3 week span. It's a Browning 1895 in 30-06 gov't. William's FP, and sling mount's. Rifle is about 95%. 675.00 dollar's. I shot the rifle 10 time's and it show's great promise. There was a time that I thought these rifle's were hideous (didn't like the magazine). Now after handling and shooting it I find it balances nice and carrie's fine. I like it! I do wish it was 30-40 krag though. Oh well I reload and it is easy to duplicate the Krag and get more out of the 06. Picture could be better but have poor lighting and too cold outside
Karl
Karl
-
- Senior Levergunner
- Posts: 1000
- Joined: Sat Sep 08, 2007 4:02 pm
- Location: WY
The -06 will grow on you. Brass is cheaper and easier to find. I have a 30-40 and the only real advantage that I see is that the 30-40 case is a little more user friendly to cast bullets, as the neck will contain pretty much all the lube grooves. Beyond that, they are both great cartridges in a great rifle.
-
- Senior Levergunner
- Posts: 1263
- Joined: Mon Dec 17, 2007 7:57 pm
I really like mine which is a .30-40. SLICK! Slicker than any other lever I own. Reminds me, I need to get the Climbin' Lyman repro installed. Too many other things going on.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
If you reload don't use the 180 grain Remington round nose. My gun doesn't have a very long throat . The 180 's would shoot awsome , but that was because they were contacting the rifling. I found this out by unchambering a loaded round and it wouldn't come out . I had to tap it out with a cleaning rod. So stick with spitzers.
-
- Senior Levergunner
- Posts: 1000
- Joined: Sat Sep 08, 2007 4:02 pm
- Location: WY
- Ysabel Kid
- Moderator
- Posts: 27918
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
-
- Levergunner 3.0
- Posts: 824
- Joined: Tue Apr 10, 2007 8:09 pm
- Location: New Mexico
- Contact:
Hobie, you really do need to get that done! Been awhile, as I recall.Hobie wrote:I really like mine which is a .30-40. SLICK! Slicker than any other lever I own. Reminds me, I need to get the Climbin' Lyman repro installed. Too many other things going on.
If you can read this, thank a teacher. If you can read this in English, thank a Vet!
COMNAVFORV, Vietnam 68-70
NRA Life, SASS Life, Banjo picking done cheap!
Quyana cekneq, Neva
COMNAVFORV, Vietnam 68-70
NRA Life, SASS Life, Banjo picking done cheap!
Quyana cekneq, Neva
TWO years now!Grizzly Adams wrote:Hobie, you really do need to get that done! Been awhile, as I recall.Hobie wrote:I really like mine which is a .30-40. SLICK! Slicker than any other lever I own. Reminds me, I need to get the Climbin' Lyman repro installed. Too many other things going on.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
-
- Levergunner 2.0
- Posts: 273
- Joined: Fri Sep 07, 2007 4:06 pm
- Location: San Antonio, Republic of Texas
Great find. For actual field use, as opposed to a safe queen, you might want to add a barrel band swivel so you can use a sling. Since I reworked the sights, sling and buttplate on mine almost 9 years ago, it became my #1 game rifle. Don't think of it as a brush gun either. Mine will group under 2.5 inches at 200 yards.
These are gorgeous rifles. I picked up a Browning 1895 in 30-40 Krag about 2 years ago nearly-NIB from an estate sale. Stuck a barrel band swivel on her and I'm now looking for a better rear sight to replace the buckhorn. Mine loves the 180gr Sierra spitzer over a charge of IMR4350. Don't remember the amount though, but she's going hunting this season for the 1st time.
Yes... I said..."she". Don't tell my wife...
Yes... I said..."she". Don't tell my wife...
-
- Senior Levergunner
- Posts: 1459
- Joined: Wed Feb 06, 2008 6:31 pm
- Location: Arizona Territory
I had one when they first came out in the middle 1980's. I shot cast bullets in mine. A 170 gr. gas checked with 20-22 grains of SR4759 and Federal match primers is a very accurate load.
Mine shot 180 gr. jacketed the best.
Mine shot 180 gr. jacketed the best.
SASS# 51223
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
-
- Levergunner 2.0
- Posts: 173
- Joined: Thu Sep 13, 2007 4:01 pm
- Location: New England
-
- Levergunner 3.0
- Posts: 824
- Joined: Tue Apr 10, 2007 8:09 pm
- Location: New Mexico
- Contact:
No, they were not D&Ted by the factory for the Lyman or Williams.marlin shooter wrote:The rifle has a barrel band mount on it. It won't be a safe queen. Hobie or anyone, are your rifle's D+T'ed for the Lyman or Williams receiver sight's? My rifle has one installed and just wondered if factory or done by previous owner. Thank's for all the compliment's everyone.
Karl
If you can read this, thank a teacher. If you can read this in English, thank a Vet!
COMNAVFORV, Vietnam 68-70
NRA Life, SASS Life, Banjo picking done cheap!
Quyana cekneq, Neva
COMNAVFORV, Vietnam 68-70
NRA Life, SASS Life, Banjo picking done cheap!
Quyana cekneq, Neva
They don't come from the factory D&Ted. Aftermarket...marlin shooter wrote:The rifle has a barrel band mount on it. It won't be a safe queen. Hobie or anyone, are your rifle's D+T'ed for the Lyman or Williams receiver sight's? My rifle has one installed and just wondered if factory or done by previous owner. Thank's for all the compliment's everyone.
Karl
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
The 2006 anniversary Win 95 SRC DOES come drilled and tapped for peeps. I understand only the Lymann 66 will work, not the Williams FP series. Of course, the "Climing" Lymann Model 38 still needs to be custom drilled and tapped.
Not that I have a strong preference for the Williams over the Lymann, but it seems odd to me. The Lymann 66 will serve fine, though.
Hope you enjoy yours. It looks like a great set-up. At the range I belong to, I have found many hundreds of 30-06 empties over the years. I have found 18 30-40 Krag empties. The Krag cartridge does look cool, and may be THE classic cartridge for the rifle. But the 30-06 is really more practical, even if you don't have any urge to go beyound 1920's load levels.
Sean
Not that I have a strong preference for the Williams over the Lymann, but it seems odd to me. The Lymann 66 will serve fine, though.
Hope you enjoy yours. It looks like a great set-up. At the range I belong to, I have found many hundreds of 30-06 empties over the years. I have found 18 30-40 Krag empties. The Krag cartridge does look cool, and may be THE classic cartridge for the rifle. But the 30-06 is really more practical, even if you don't have any urge to go beyound 1920's load levels.
Sean
Junkbug, It's the Williams fool proof that works. The lyman 66WB won't get low enough with out the windage adjustment screwhead hitting the receiver. The fool proof is wider and clears the receiver on the non mounting side. If the adjustment screw head wasn't so big on the Lyman it would work. Trust me I've tried it.
-
- Levergunner 2.0
- Posts: 273
- Joined: Fri Sep 07, 2007 4:06 pm
- Location: San Antonio, Republic of Texas