Looking for 327 federal brass

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
4t5
Senior Levergunner
Posts: 1258
Joined: Sat Sep 15, 2007 8:28 am

Looking for 327 federal brass

Post by 4t5 »

Have searched all over can’t locate any, has anyone seen it for sale?
Starline says no backorder
Rumble.com/ hickock45
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 3936
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Looking for 327 federal brass

Post by Scott Tschirhart »

Freedom Arms has some.
User avatar
AmBraCol
Webservant
Posts: 3654
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: Looking for 327 federal brass

Post by AmBraCol »

Keep your eye on Starline's site. I got an email a couple weeks ago about a backorder I had with them for almost three years. Apparently they're about to fulfill those backorders, and I imagine that they'll also more than fulfill them in order to fill part of the demand.
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
4t5
Senior Levergunner
Posts: 1258
Joined: Sat Sep 15, 2007 8:28 am

Re: Looking for 327 federal brass

Post by 4t5 »

Thanks guys !
Rumble.com/ hickock45
User avatar
Ray
Advanced Levergunner
Posts: 2830
Joined: Thu Sep 20, 2007 2:45 am

Re: Looking for 327 federal brass

Post by Ray »

Just got an email reply from lori collingwood of freedom arms re. .327 brass and they do N O T have any .327 brass in-stock and haven't had any for quite some time.

There are sites that will take your money with no intention of delivering a product. Beware of any site that promises availability of scarce brass and primers/percussion caps especially those that only take crypto currency.
m.A.g.a. !
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 3936
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Looking for 327 federal brass

Post by Scott Tschirhart »

Ray wrote: Mon Oct 09, 2023 7:43 pm Just got an email reply from lori collingwood of freedom arms re. .327 brass and they do N O T have any .327 brass in-stock and haven't had any for quite some time.

There are sites that will take your money with no intention of delivering a product. Beware of any site that promises availability of scarce brass and primers/percussion caps especially those that only take crypto currency.
Yes, there are a lot of scammers out there. But I don’t think Freedom Arms falls into that category. I saw that brass listed on their website and they should have taken it down if they didn’t have any. But I’ve bought items from Freedom Arms for many years and I know the Bakers personally. They have always been honest and trustworthy in my experience.
User avatar
Ray
Advanced Levergunner
Posts: 2830
Joined: Thu Sep 20, 2007 2:45 am

Re: Looking for 327 federal brass

Post by Ray »

I certainly did not mean to disparage freedom arms. I was simply pointing-out that they do not have the brass in-stock. Their merchandise items listed are not current and since I went to the effort of emailing them I posted the results to save others from calling or emailing.

As for the rest of my comment, there are bogus sites that list scarcities (brass, primers, percussion caps) such as .327 & .480 and the like and they have similar u.r.l.s to legitimate, respected businesses. For instance, a simple internet search for ".327 brass for sale" prompts a.i. tailored, auto-generated sites within seconds that look similar to legitimate firms. Hundreds if not thousands of folk were duped during the recent percussion cap drought by these sites.

One suspicious example.....

https://reloadingbrassusa.com/starline- ... al-magnum/

Published warning.....

https://www.outdoorlife.com/guns/scam-ammo-websites/
m.A.g.a. !
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 3936
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Looking for 327 federal brass

Post by Scott Tschirhart »

No doubt. I’ve run across those sites while hunting.480 ammo.

The warning is a good one.
User avatar
Griff
Posting leader...
Posts: 20830
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Looking for 327 federal brass

Post by Griff »

I just checked on Ammoseek.com and they didn't list anyone that had it. They're usually a good start for a search.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
User avatar
joepb
Levergunner 2.0
Posts: 117
Joined: Fri Jan 11, 2008 3:44 pm
Location: Wyoming

Re: Looking for 327 federal brass

Post by joepb »

I just received my back order from starline from over 2 years ago. They are making some now............Joe
User avatar
AmBraCol
Webservant
Posts: 3654
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: Looking for 327 federal brass

Post by AmBraCol »

joepb wrote: Fri Oct 13, 2023 1:27 pm I just received my back order from starline from over 2 years ago. They are making some now............Joe
Mine's on the way as well, should arrive today. Interestingly it's still "Unavailable" and "No Backorder" on Starline's site. Perhaps retailers will be putting it online and on the shelves soon. I'm just glad I got my order in when I did, it went "no backorder" shortly after I backordered, back in January 2021.
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
User avatar
Ray
Advanced Levergunner
Posts: 2830
Joined: Thu Sep 20, 2007 2:45 am

Re: Looking for 327 federal brass

Post by Ray »

When I first read that .327 backorders were soon to be fulfilled I contacted grafs and the lady responded that starline backorders are awarded in chronological order and they have had some 10,000 on order since 2018. So I'm hoping that starline has made at least a quarter to half millions so most everybody gets theirs.
m.A.g.a. !
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 3936
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Looking for 327 federal brass

Post by Scott Tschirhart »

That’s a lot of back orders!!!!
User avatar
AmBraCol
Webservant
Posts: 3654
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: Looking for 327 federal brass

Post by AmBraCol »

Powder Valley just sent out a bulletin about a big stock of Starline brass coming in. BUT, 327 Federal Magnum is NOT on the menu. It kind of makes me figure that perhaps they underestimated the demand... - but I admit that I've little to zip knowledge about the whole supply chain of reloading brass works. I figured that since they'd done a run of 32 SWL that it was OBVIOUS they'd be immediately doing the 32 H&R and 327 Magnum also. But that was two and a half years ago. My back order was delivered a couple weeks ago. Now we wait to see how long 'til 327 Federal Magnum hits the retailers shelves.
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
Post Reply