Dunno what its good for.....

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
Ray
Advanced Levergunner
Posts: 2828
Joined: Thu Sep 20, 2007 2:45 am

Dunno what its good for.....

Post by Ray »

if you'll forgive the idiomatic contraction, but I'm not going to waste scarce full .327 loads on this excrescence.
IMG_20230302_082503783~2_kindlephoto-224819166.jpg
Standard .32 h & r loads will do. Not to mention the sks fmjs loaded in .32 longs to .327 o.a.l.
You do not have the required permissions to view the files attached to this post.
Last edited by Ray on Thu Mar 02, 2023 4:17 pm, edited 2 times in total.
m.A.g.a. !
User avatar
Old No7
Advanced Levergunner
Posts: 3583
Joined: Tue Dec 18, 2007 9:06 pm
Location: Southern Maine

Re: Dunno what its good for.....

Post by Old No7 »

I have several 32 revolvers, and I like 'em a lot. I've looked at those Bond Derringer (Deringer?) before, but several of my all-stainless Kahrs are smaller and have 3X or 4X capacity.

What is it good for???

I'd call that a "Get Off Me" gun. Or maybe use it with birdshot for snakes.

Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
Rockrat
Levergunner 2.0
Posts: 443
Joined: Wed Dec 19, 2018 8:35 pm
Location: Colorado

Re: Dunno what its good for.....

Post by Rockrat »

If I had one, it would be in 45 acp, so I could use the CCI shot loads or make my own shot loads.
User avatar
2ndovc
Advanced Levergunner
Posts: 9319
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: Dunno what its good for.....

Post by 2ndovc »

Interested on how the .32s shoot, distance, poi etc.

I have one of the traditional .45 Colt/.410s and it's fun to get it out and shoot it now and then.
I bought it, along with a couple small revolvers the summer I broke my wrist. With a cast on my left arm, I couldn't work the slide on anything bigger than a .22 and that was iffy.
It's now a stash gun on the first floor where I'm the only one in the house that can reach it due to the two year old that's starting to get into things.


jb 8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
User avatar
AmBraCol
Webservant
Posts: 3654
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: Dunno what its good for.....

Post by AmBraCol »

Now that's an interesting looking contraption. Didn't know they made them in that persuasion. Haven't owned a double barrel pistol since I sent my old Rossi side by side 22 down the river. I think that over/under arrangement would be a bit easier to get to shoot reasonably in line with the sights.
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
User avatar
Ray
Advanced Levergunner
Posts: 2828
Joined: Thu Sep 20, 2007 2:45 am

Re: Dunno what its good for.....

Post by Ray »

"Didn't know they made them in that persuasion."

It started out with a 3" .357 barrel that I could miss an oil drum at 10 paces with. Then came extra barrels anytime I found them on-sale/clearanced-out. A 3" .40 then a 2.5" .44 spl. and same in .45 acp. I believe there is also a 2.5 or 3" 9mm hiding under the clutter.

They make a 6" 10mm but they sure are proud of them at about $300.....just the barrel !
m.A.g.a. !
User avatar
AmBraCol
Webservant
Posts: 3654
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: Dunno what its good for.....

Post by AmBraCol »

Ray wrote: Thu Mar 02, 2023 8:23 pm "Didn't know they made them in that persuasion."

It started out with a 3" .357 barrel that I could miss an oil drum at 10 paces with. Then came extra barrels anytime I found them on-sale/clearanced-out. A 3" .40 then a 2.5" .44 spl. and same in .45 acp. I believe there is also a 2.5 or 3" 9mm hiding under the clutter.

They make a 6" 10mm but they sure are proud of them at about $300.....just the barrel !
And I didn't know they made spare barrels for them! Learn something new each day. I figured you'd have to buy a new pistol each time you wanted to play with a different caliber. Shows how much attention I've paid to them over the years!
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
Post Reply