So, my new lifter for the .45 Cowboy Special round arrived yesterday. Going to install this on my Uberti 1860 "Henry" rifle currently in .45 Colt. Basically trying to make a centerfire, .45-caliber version of the original .44 Henry rimfire round - and you enablers convinced me to do it!
Anyway, I will certainly load up some 200-grain lead bullets with holy black. But I'd also like to load up some smokeless rounds for convenience. Again, my plan is to use 200-grain LRNFP bullets, plus try some 160-grain lead bullets as well. For those who load this round, what recipe do you like best?
Thanks!
.45 Cowboy Special loadings
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- Ysabel Kid
- Moderator
- Posts: 27790
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: .45 Cowboy Special loadings
Any good 45 ACP loading will work well, the main two I currently use are 5.5 of W231 with a 200SWC, and a 225-230 truncated cone over 5.8 Unique.
Brian Pearce did an article on 45 Auto Rim +P in Handloader some years ago, and I've used one of his loads with the Keith Auto Rim bullet in the Cowboy Special brass as well. It was an impressive little thumper.
Brian Pearce did an article on 45 Auto Rim +P in Handloader some years ago, and I've used one of his loads with the Keith Auto Rim bullet in the Cowboy Special brass as well. It was an impressive little thumper.
- Griff
- Posting leader...
- Posts: 20803
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: .45 Cowboy Special loadings
In my toggle links I'm a little more cautious using 45ACP data. For my social load, I'm using a 200 grain Speer HP and 6.3 grains of Hodgdon's CFE, which is a minimum 45 ACP load, and according to their data develops 14,900 PSI @877 fps. (I can't find my rifle data). My plinking, (cowboy action) load is 3.4 grains of Clays behind a 160 grain cast. Again, that's a minimum 45ACP load with a jacketed bullet, but the lead moves easier and has much less pressure, although in the big 45 Colt chamber, I believe it's even less, as my loads run in the high 700s from the 18-½" 1873 and the low to mid 700s in the 1860.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: .45 Cowboy Special loadings
Good point about the pressure drop in the Colt chamber Griff. I've chrono'd the same Cowboy Special load in both cylinders of my Blackhawk and it's 100 fps slower from the Colt cylinder.
- 2ndovc
- Advanced Levergunner
- Posts: 9302
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: .45 Cowboy Special loadings
I made up a couple dozen last summer with my favorite .45AR load: 3.8 grains of Bullseye and a 230 gr LRN. Turns out the Ruger I was shooting them with has some forcing cone issues that need to be resolved so the groups were pretty bad. Along with everything else I've run through it. I shot a hand full of what was left with my little Taylor's 1860 conversion at some bowling pins last summer and they were spot on. Need to make up some more and put them on paper.
jb
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
- Ysabel Kid
- Moderator
- Posts: 27790
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: .45 Cowboy Special loadings
Thanks Jason!2ndovc wrote: ↑Sun Jan 29, 2023 8:28 am I made up a couple dozen last summer with my favorite .45AR load: 3.8 grains of Bullseye and a 230 gr LRN. Turns out the Ruger I was shooting them with has some forcing cone issues that need to be resolved so the groups were pretty bad. Along with everything else I've run through it. I shot a hand full of what was left with my little Taylor's 1860 conversion at some bowling pins last summer and they were spot on. Need to make up some more and put them on paper.
jb
- Ysabel Kid
- Moderator
- Posts: 27790
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: .45 Cowboy Special loadings
I forgot to ask - do you have the case dimensions and cartridge OAL for the .45 Cowboy Special? I've found a ton of conflicting data on this.2ndovc wrote: ↑Sun Jan 29, 2023 8:28 am I made up a couple dozen last summer with my favorite .45AR load: 3.8 grains of Bullseye and a 230 gr LRN. Turns out the Ruger I was shooting them with has some forcing cone issues that need to be resolved so the groups were pretty bad. Along with everything else I've run through it. I shot a hand full of what was left with my little Taylor's 1860 conversion at some bowling pins last summer and they were spot on. Need to make up some more and put them on paper.
jb
- Griff
- Posting leader...
- Posts: 20803
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: .45 Cowboy Special loadings
As far as OAL is concerned in pistols it won't matter and for your rifle measure from the stop in the carrier to the front of the carrier. Leave a couple of thousandths for clearance. I've never seen any specs on case dimensions beyond 45AXP length & 45 Colt rim.Ysabel Kid wrote: ↑Mon Jan 30, 2023 2:10 pmI forgot to ask - do you have the case dimensions and cartridge OAL for the .45 Cowboy Special? I've found a ton of conflicting data on this.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!