Finally -- I'm a levergunner again
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Advanced Levergunner
- Posts: 9117
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Finally -- I'm a levergunner again
Resting easier already after UPS dropped off this C&R Marlin Model 336A in .35 Remington, built in the year 1950. Harry Truman was president, God bless that man.
Except for a new replacement buttplate, it is unmolested. Oh it has bluing wear, a nick and scratch or two and a bit of pitting in the left upper receiver -- but then so do I and I am three years younger.
I'll add a receiver sight and probably change out the front sight so I can see the danged thing, but other than that, no changes. Found some brass and have the Lee C358-200 mold and Pacesetter dies incoming.
Except for a new replacement buttplate, it is unmolested. Oh it has bluing wear, a nick and scratch or two and a bit of pitting in the left upper receiver -- but then so do I and I am three years younger.
I'll add a receiver sight and probably change out the front sight so I can see the danged thing, but other than that, no changes. Found some brass and have the Lee C358-200 mold and Pacesetter dies incoming.
You do not have the required permissions to view the files attached to this post.
Re: Finally -- I'm a levergunner again
35s are great.
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Re: Finally -- I'm a levergunner again
Nice catch Bill! Enjoy!
- gamekeeper
- Spambot Zapper
- Posts: 17486
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Over the pond unfortunately.
Re: Finally -- I'm a levergunner again
Looks like fine honest levergun......
Whatever you do always give 100%........... unless you are donating blood.
Re: Finally -- I'm a levergunner again
Congratulations and you've got there a rifle that yes I'd like to have very much, but actually could use the most. I got a 336 in 30-30, 20" barrel, I love it, but that there in that configuration and caliber is for these mountains what a Mod 71 is in the west for Mule Deer & Elk. Used to be several 336 in 35 Rem, but they're either gone or in permanent possession! I never did see one in a 24" barrel around here tho
"Jesus saith unto him, I am the way, the truth, and the life"
"Better drawdown Alvin!"
"If you gotta shoot, shoot don't talk"
Conservative since day one and until the last!
"Better drawdown Alvin!"
"If you gotta shoot, shoot don't talk"
Conservative since day one and until the last!
- ollogger
- Advanced Levergunner
- Posts: 2807
- Joined: Mon Jul 05, 2010 2:47 pm
- Location: Wheatland Wyoming
- Contact:
Re: Finally -- I'm a levergunner again
If a guy could only have one lever gun you made a great choice
Brad
Brad
Re: Finally -- I'm a levergunner again
That`s great Bill, i have a 336 in 35 also.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Finally -- I'm a levergunner again
Bill,
Your Marlin is also referred to as a "waffletop".
Great rifle you have there.....good shooting !
Your Marlin is also referred to as a "waffletop".
Great rifle you have there.....good shooting !
-
- Advanced Levergunner
- Posts: 9117
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: Finally -- I'm a levergunner again
Thanks fellas. Pleased to be the caretaker for a while.
Vic - not just a waffletop, but it hasn't been drilled and tapped -- nor will it be in my custody.
Vic - not just a waffletop, but it hasn't been drilled and tapped -- nor will it be in my custody.
- 2ndovc
- Advanced Levergunner
- Posts: 9362
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Finally -- I'm a levergunner again
Way cool!
My .35s got caught up in the "Purge" of '16 and was on the hunt to find another when you hooked me up with your friend and the Swede.
I was all worried that I'd sold off my ammo and components I ran down to the basement to check. Found about 500 rounds nicely packed away in a couple of .50 cal steel cans. Along with some empty brass and lots of bullets, I'm ready to go shooting as soon as it's not 20 degrees outside.
Have fun and looking forward to a range report!
jb
My .35s got caught up in the "Purge" of '16 and was on the hunt to find another when you hooked me up with your friend and the Swede.
I was all worried that I'd sold off my ammo and components I ran down to the basement to check. Found about 500 rounds nicely packed away in a couple of .50 cal steel cans. Along with some empty brass and lots of bullets, I'm ready to go shooting as soon as it's not 20 degrees outside.
Have fun and looking forward to a range report!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
- Scott Tschirhart
- Advanced Levergunner
- Posts: 4085
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Finally -- I'm a levergunner again
Now that's a hunting rifle! Looks great!
- GunnyMack
- Advanced Levergunner
- Posts: 10285
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Finally -- I'm a levergunner again
Great find Bill! The ol girl looks like she is ready to make meat.
Range report , come on hurry up:lol:
Range report , come on hurry up:lol:
BROWN LABS MATTER !!
Re: Finally -- I'm a levergunner again
Everything the 357 maximum was trying to be and more.
Rumble.com/ hickock45
-
- Advanced Levergunner
- Posts: 9117
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: Finally -- I'm a levergunner again
Jason, glad you are "ammoed up" to enjoy your new Swede. Look forward to your range report, too.
Re: Finally -- I'm a levergunner again
That is great and congratulations on a fine old Marlin! Another old Ballard rifled 35 lives on to make meat in the hands of someone who appreciates its character.
I could hunt with no other rifle than my 55 Texan, for the rest of my days. and be just fine with it.
I could hunt with no other rifle than my 55 Texan, for the rest of my days. and be just fine with it.
People were smarter before the Internet, or imbeciles were harder to notice.
- Ysabel Kid
- Moderator
- Posts: 27918
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
- marlinman93
- Advanced Levergunner
- Posts: 6507
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Finally -- I'm a levergunner again
Great find Bill!
1950 was the first year Marlin offered the 336 in the .35 Rem. chambering! They're great guns, with a very loyal following.
1950 was the first year Marlin offered the 336 in the .35 Rem. chambering! They're great guns, with a very loyal following.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
Re: Finally -- I'm a levergunner again
Nothing like a virgin waffletop!, and in 35 caliber
congratulations
Johnny
congratulations
Johnny
-
- Levergunner 2.0
- Posts: 492
- Joined: Wed Dec 09, 2020 12:39 am
Re: Finally -- I'm a levergunner again
Bigtime jealous. Congrats.
- earlmck
- Advanced Levergunner
- Posts: 3447
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: Finally -- I'm a levergunner again
Fine lookin' rifle there Bill. Yes indeedy! Uh... didn't you already own that very rifle once before?
This year I'm going to try my trusty 336A on our 500 yard game we do at our range. Hoping those 205 grain Lees will get to 500 yards before I run out of elevation on the old receiver sight.
This year I'm going to try my trusty 336A on our 500 yard game we do at our range. Hoping those 205 grain Lees will get to 500 yards before I run out of elevation on the old receiver sight.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
-
- Advanced Levergunner
- Posts: 9117
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: Finally -- I'm a levergunner again
Earl, it was coon-fingering your 336As in .30 WCF and .35 Remington (as well as I can remember) in a parking lot in Redmond that planted the bug. And yes, I had one a couple of years back -- a 1951 -- and cannot 'splain why I parted with it. But I am in communication with the gentleman who bought it, and he in fact supplied me with 48 pieces of new brass.
Please let us know how you do with your rifle at 500 yards at the COSSA range!
Rather than try to hunt up an old steel Lyman 66LA, I ordered the Williams FoolProof and a Firesight for up front, in the belief that this will allow me to do my best possible work with this rifle.
Please let us know how you do with your rifle at 500 yards at the COSSA range!
Rather than try to hunt up an old steel Lyman 66LA, I ordered the Williams FoolProof and a Firesight for up front, in the belief that this will allow me to do my best possible work with this rifle.
Last edited by Bill in Oregon on Tue Feb 08, 2022 2:55 pm, edited 1 time in total.
Re: Finally -- I'm a levergunner again
Bill,
FWIW, the Williams Firesight really lights up. I had one on my Marlin 30-30 CB. It gets damaged real easy, so be careful with leaning the rifle against anything.
FWIW, the Williams Firesight really lights up. I had one on my Marlin 30-30 CB. It gets damaged real easy, so be careful with leaning the rifle against anything.
-
- Advanced Levergunner
- Posts: 4738
- Joined: Fri Sep 07, 2007 5:00 am
- Location: North Coast of America-Ohio
Re: Finally -- I'm a levergunner again
Congrats!....I have six Marlins set up the same way . I think I like them. .