Perfection heaters

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Perfection heaters

Post by Pitchy »

Picked up a few Perfection heaters and restoring them, great heaters for a cabin or garage.

Image

Also put a light bulb in one.

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
gamekeeper
Spambot Zapper
Posts: 17322
Joined: Thu Sep 06, 2007 3:32 pm
Location: Over the pond unfortunately.

Re: Perfection heaters

Post by gamekeeper »

I remember having one like that as a kid. During the war my dad bought it for the Anderson Air Raid Shelter we had in the back garden, I can only remember the shelter when it was removed a few years after the war. The heater was used indoors only during spells of really cold weather. I think I can remember having a kettle on top too.
If more men loved and cherished their wives as much as I love bacon the world would be a much better place.
piller
Posting leader...
Posts: 15188
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Perfection heaters

Post by piller »

I had to look them up. Very clever item.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Perfection heaters

Post by Blaine »

While living off post in ROK I used kerosene heat all the time. I didn't trust those ondal charcoal floor heaters (CO).
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
piller
Posting leader...
Posts: 15188
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Perfection heaters

Post by piller »

Those ondal heaters caused some deaths in the year I was there. Carbon monoxide poisoning.
Where I was, not even the Base Commanding Officer was allowed to live off post. The Imjin was in our back yard. Freedom Bridge was our primary responsibility. PMJ was our secondary responsibility. Our First Platoon of HMMWVs with the TOW IIs and Alpha Co were Out In Front of Everyone. Their primary responsibility was PMJ.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
3leggedturtle
Advanced Levergunner
Posts: 4145
Joined: Fri Dec 21, 2007 11:34 am
Location: north of Palacios about 1400 miles

Re: Perfection heaters

Post by 3leggedturtle »

PITCHY STOP IT ! Your killing me. Those are great units but every one i find is made of gold or rusted beyond use. I just started playing with the little beer can and Trangia alcohol stoves.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres

250 Savage... its what the 223 wishes it could be...!
black river smith
Levergunner 2.0
Posts: 118
Joined: Tue May 19, 2020 10:58 am

Re: Perfection heaters

Post by black river smith »

Pitchy,

I have two patterned like the one in your second picture. They belonged to my grandparents and then my father. While they are the same general shape there are slight variations between them. I repainted them with high temp paint in original color patterns and have them down in my basement. Both do work, plus I have one replacement wick.

I do prize these two as 'remembrance items'.
Last edited by black river smith on Sat May 29, 2021 12:55 pm, edited 1 time in total.
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Thanks guys, yep rust is a killer the fuel tanks get hit the worst a little solder and tank sealer is what i`m doing.
I`m going to use a couple of these in the shop to take the chill off.
Yep Ebay is terrible on the price, we picked up these four at the junk place for 25 bucks each, ya can buy new wicks on Ebay.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

I re-did the electric one, made a wood round disc that sits lower where the tank sat so now the lower part lights up too.

Image

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
OldWin
Advanced Levergunner
Posts: 8962
Joined: Fri Oct 09, 2009 2:38 pm

Re: Perfection heaters

Post by OldWin »

Nice! I've always liked those. I have one in my gun room I got from a neighbor at a lawn sale. It was 20 years ago at least. Got it for 5 bucks.
"Oh bother", said Pooh, as he chambered another round.
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Perfection heaters

Post by Blaine »

Could you beef up the wiring and use a 500 watt IR bulb? It would actually heat the room. :idea:
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Thanks Jay and Blaine, guessing something like that would work Blaine.
These stoves were rated at 10,000 btu`s and would cook things pretty good i`ve read.
Good site about these stoves.

http://www.milesstair.com/Site_Index_fo ... ction.html
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Perfection heaters

Post by Blaine »

Pitchy wrote: Sat May 29, 2021 6:18 am Thanks Jay and Blaine, guessing something like that would work Blaine.
These stoves were rated at 10,000 btu`s and would cook things pretty good i`ve read.
Good site about these stoves.

http://www.milesstair.com/Site_Index_fo ... ction.html
I forget which brand, but there's an expensive space heater out there that uses IR bulbs to heat the room like that.
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Blaine wrote: Sat May 29, 2021 12:42 pm
Pitchy wrote: Sat May 29, 2021 6:18 am Thanks Jay and Blaine, guessing something like that would work Blaine.
These stoves were rated at 10,000 btu`s and would cook things pretty good i`ve read.
Good site about these stoves.

http://www.milesstair.com/Site_Index_fo ... ction.html
I forget which brand, but there's an expensive space heater out there that uses IR bulbs to heat the room like that.
Thanks but i don`t plan on heating with that stove it`s just for looks, my battle is with repairing fuel tanks at the moment. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
piller
Posting leader...
Posts: 15188
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Perfection heaters

Post by piller »

Metal fuel tanks do tend to rust. I am guessing that those heaters just had tanks that were never considered to need to last 100 years or more. If anyone would have known, I would bet that someone would have made a bunch of replacements. Too bad. Their Grandchildren could have made money.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

piller wrote: Sat May 29, 2021 11:01 pm Metal fuel tanks do tend to rust. I am guessing that those heaters just had tanks that were never considered to need to last 100 years or more. If anyone would have known, I would bet that someone would have made a bunch of replacements. Too bad. Their Grandchildren could have made money.
Yep i can`t believe someone hasn`t made a repo tank wish they would of.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
stretch
Advanced Levergunner
Posts: 2284
Joined: Wed Oct 03, 2007 7:15 pm

Re: Perfection heaters

Post by stretch »

Totally cool AND useful!! 8)

Here's a VERY helpful site for all things kerosene heater and oil lamp related:

http://www.milesstair.com/

Here in Maine, people throw out perfectly good kerosene heaters all the time.
I have 6 right now, I think - 4 came from the dump for free. They just needed cleaning, fresh fuel,
and sometimes a new wick. Sometimes I find them for sale for short money =$25 or so.

It's important to empty the tanks - the kerosene tends to attract water and this settles to the bottom
and rusts out the tank. Water will also render the wick inoperable unless it's thoroughly dried out.

They're not hard to work on, and work great for heat when the power goes out, or extra heat
when it's REALLY cold.

-Stretch
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Good points Stretch i imagine most tanks rusted out from sitting with fuel in them. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
Grizz
Advanced Levergunner
Posts: 11808
Joined: Fri Aug 31, 2007 7:15 pm

Re: Perfection heaters

Post by Grizz »

those are really nice heaters. i think kero cook stoves are made from brass so they last a long time.

there is some kind of liner that people put in mc tanks but i don't know what it is
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Grizz wrote: Sun May 30, 2021 11:38 am those are really nice heaters. i think kero cook stoves are made from brass so they last a long time.

there is some kind of liner that people put in mc tanks but i don't know what it is
I`m experimenting with some of those tank liners, have some new stuff this week that ya paint on the outside that`s supposed to work good.
The tanks are less rusty on the outside called exo-coat.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
Grizz
Advanced Levergunner
Posts: 11808
Joined: Fri Aug 31, 2007 7:15 pm

Re: Perfection heaters

Post by Grizz »

thanks i'll check that out
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Got some new wicks today so have some heaters in working order, the one in the picture has a solid tank and a observation window so will use it the most.
The exo-coat is thick so paints on real nice without running so hoping for good results with that.

Image

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
Grizz
Advanced Levergunner
Posts: 11808
Joined: Fri Aug 31, 2007 7:15 pm

Re: Perfection heaters

Post by Grizz »

good tip on the exo-coat, i'll look for it. hope you have a working CO detector ! :)
piller
Posting leader...
Posts: 15188
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Perfection heaters

Post by piller »

Looks nice. Like Grizz pointed out, a good Carbon Monoxide detector would be a good idea.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Thanks guys, today i made a observation window. :)

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
black river smith
Levergunner 2.0
Posts: 118
Joined: Tue May 19, 2020 10:58 am

Re: Perfection heaters

Post by black river smith »

Pitchy,
What material did you use for the window? The original material was a pressed mylar, I think. One of mine has a torn window, I would not mind replacing it and the other is very cloudy.
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

black river smith wrote: Wed Jun 02, 2021 8:00 pm Pitchy,
What material did you use for the window? The original material was a pressed mylar, I think. One of mine has a torn window, I would not mind replacing it and the other is very cloudy.
The other perfection heater with a window i pictured has screen in it so that`s what i used in this one.
Many stoves used Mica in the windows which ya can buy on line or at a hardware store. :)
Also what i like about screen is ya can see the flame clearly as to how it`s burning.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Bill in Oregon
Advanced Levergunner
Posts: 8846
Joined: Sun Jun 29, 2008 10:05 am
Location: Sweetwater, TX

Re: Perfection heaters

Post by Bill in Oregon »

Lenn, very cool stuff. 8)
Headed toward the 100s down here, so probably need one of those evaporative cooler water bags Dad used to hand on the front of the '50 Chev DeLuxe. ... :(
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Thanks Bill, in the 90`s up here the next few days also. :o
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Perfection heaters

Post by Blaine »

black river smith wrote: Wed Jun 02, 2021 8:00 pm Pitchy,
What material did you use for the window? The original material was a pressed mylar, I think. One of mine has a torn window, I would not mind replacing it and the other is very cloudy.
We always called it isinglass on the old Moore Stoves, which is a type of mica (or IS mica)
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
black river smith
Levergunner 2.0
Posts: 118
Joined: Tue May 19, 2020 10:58 am

Re: Perfection heaters

Post by black river smith »

Yes Mica, thanks for the correct answer.
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

black river smith wrote: Thu Jun 03, 2021 9:10 pm Yes Mica, thanks for the correct answer.
Every Perfection heater i`ve seen has screen in the window, other stoves such as parlor stoves ect... and sad iron stoves use Mica. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
black river smith
Levergunner 2.0
Posts: 118
Joined: Tue May 19, 2020 10:58 am

Re: Perfection heaters

Post by black river smith »

Pitchy,

So, I went and checked them. Both are Perfections. One has a triangular plate that is stamped 525 and it has a screen. The other has a fancy scrolled plate that is stamped 130-C and it definitely has a mica window. I was thinking the screen was just a replacement, so that is why I stated the interest in a replacement, guess I was wrong.

Thanks for sharing the information. I appreciate the knowledge learned.
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Your welcome but i could be wrong i`m sure there`s models i haven`t seen.
Well i did it now just bought the perfection model 740 with the glass center whole middle section will post pics when it arrives next week. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
coyote nose
Levergunner 2.0
Posts: 476
Joined: Fri Sep 21, 2007 11:25 am
Location: NE Ohio

Re: Perfection heaters

Post by coyote nose »

OK I don't understand something...how can these burn kerosene and NOT cause CO to build up????
"...for there is a cloud on my horizon...and its name is progress." E. Abbey, 1958
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

coyote nose wrote: Fri Jun 04, 2021 2:43 pm OK I don't understand something...how can these burn kerosene and NOT cause CO to build up????
Maybe they do, it`s recommended to crack a window while in use.
It`s a good idea to read the manufactures recommendations and warnings before using any kind of stove in a enclosed space. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Perfection heaters

Post by Blaine »

coyote nose wrote: Fri Jun 04, 2021 2:43 pm OK I don't understand something...how can these burn kerosene and NOT cause CO to build up????
Properly cleaned, and adjusted, wick trimmed (clear blue flame, no smoke) the danger is minimal.
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Sure can`t wait to get the model 740 which have a enamel finish and are rare, if ya do a search on the 750 or 735 they look the same. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
Grizz
Advanced Levergunner
Posts: 11808
Joined: Fri Aug 31, 2007 7:15 pm

Re: Perfection heaters

Post by Grizz »

Blaine wrote: Sat Jun 05, 2021 12:12 pm
coyote nose wrote: Fri Jun 04, 2021 2:43 pm OK I don't understand something...how can these burn kerosene and NOT cause CO to build up????
Properly cleaned, and adjusted, wick trimmed (clear blue flame, no smoke) the danger is minimal.
True Dat, however, an operational CO detective is mandatory on my motorboats, in my cars, and at the house. Otherwise you won't know what hit ya.

when i was running my sailboat down the Columbia the CO alarm in the cabin sounded. the outboard is in a well in the lazarette, it has underwater exhaust, and those bubbles were surfacing a boat length aft in the wake.

somehow the passage of the boat was drawing CO into the cabin. if someone had been asleep in there, i would have had a corpse for a crew.
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Perfection heaters

Post by Blaine »

Grizz wrote: Sun Jun 06, 2021 1:03 pm
Blaine wrote: Sat Jun 05, 2021 12:12 pm
coyote nose wrote: Fri Jun 04, 2021 2:43 pm OK I don't understand something...how can these burn kerosene and NOT cause CO to build up????
Properly cleaned, and adjusted, wick trimmed (clear blue flame, no smoke) the danger is minimal.
True Dat, however, an operational CO detective is mandatory on my motorboats, in my cars, and at the house. Otherwise you won't know what hit ya.

when i was running my sailboat down the Columbia the CO alarm in the cabin sounded. the outboard is in a well in the lazarette, it has underwater exhaust, and those bubbles were surfacing a boat length aft in the wake.

somehow the passage of the boat was drawing CO into the cabin. if someone had been asleep in there, i would have had a corpse for a crew.
Only one small fly in the ointment....under 40 degrees CO alarms are very untrustworthy and given to beeping, and otherwise undesirable performance. I know from personal experience. Best to properly vent rather than rely on an unreliable piece of machine. Also, don't sleep on the floor as CO is heavier than air.
While I'm on a roll....the dumbest thing ever is the combination Smoke/CO alarm. Smoke goes to the ceiling, and the CO stays on the floor....And everybody installs them up high on the wall, or the ceiling.
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
stretch
Advanced Levergunner
Posts: 2284
Joined: Wed Oct 03, 2007 7:15 pm

Re: Perfection heaters

Post by stretch »

Crack a window, make sure the wick is in good shape, and you'll be fine. I've used
kerosene heaters for over 30 years with no ill effects. A dose of common sense goes
a long way.......

People use millions of these all over the globe. You can also light and extinguish them
outside, which virtually eliminates any smell on startup or shutdown indoors. If the thing stinks
while it's running normally, something is wrong.

CO detectors, IMHO, are not needed for these heaters.

-Stretch
harry
Senior Levergunner
Posts: 1406
Joined: Mon Jul 28, 2008 8:33 pm
Location: West central Montana

Re: Perfection heaters

Post by harry »

Blaine wrote: Sun Jun 06, 2021 2:09 pm
Grizz wrote: Sun Jun 06, 2021 1:03 pm
Blaine wrote: Sat Jun 05, 2021 12:12 pm
coyote nose wrote: Fri Jun 04, 2021 2:43 pm OK I don't understand something...how can these burn kerosene and NOT cause CO to build up????
Properly cleaned, and adjusted, wick trimmed (clear blue flame, no smoke) the danger is minimal.
True Dat, however, an operational CO detective is mandatory on my motorboats, in my cars, and at the house. Otherwise you won't know what hit ya.

when i was running my sailboat down the Columbia the CO alarm in the cabin sounded. the outboard is in a well in the lazarette, it has underwater exhaust, and those bubbles were surfacing a boat length aft in the wake.

somehow the passage of the boat was drawing CO into the cabin. if someone had been asleep in there, i would have had a corpse for a crew.
Only one small fly in the ointment....under 40 degrees CO alarms are very untrustworthy and given to beeping, and otherwise undesirable performance. I know from personal experience. Best to properly vent rather than rely on an unreliable piece of machine. Also, don't sleep on the floor as CO is heavier than air.
While I'm on a roll....the dumbest thing ever is the combination Smoke/CO alarm. Smoke goes to the ceiling, and the CO stays on the floor....And everybody installs them up high on the wall, or the ceiling.
https://www.epa.gov/indoor-air-quality- ... e-detector
Trump 2024

All responses have been cleared by the law firm of "Elmer and Fudd."
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Perfection heaters

Post by Blaine »

Wow....Honestly, that goes against every single Safety Briefing that I ever got in the Army over in ROK..... :lol: Dip me in Kimchee and roll me in crackers, by golly.
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
piller
Posting leader...
Posts: 15188
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Perfection heaters

Post by piller »

Blaine wrote: Sun Jun 06, 2021 6:55 pm Wow....Honestly, that goes against every single Safety Briefing that I ever got in the Army over in ROK..... :lol: Dip me in Kimchee and roll me in crackers, by golly.
Naah! Dipping someone in Kimchee was declared to be an inhumane punishment back around 1999. The smell was too horrible.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

The 740 heater came today and it`s really nice, font looks like new, first light in the video acts like there`s a little water in the fuel but got better later.
Found the problem they put a new wick in it but must of sat a long time as it smelled reel bad, so put another new whick in and working perfect now.
I think maybe they soaked the wick with water for shipping and that`s what caused it.

Image

Image

Image

video
https://www.youtube.com/watch?v=7gg6ftS-X6o
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
User avatar
gamekeeper
Spambot Zapper
Posts: 17322
Joined: Thu Sep 06, 2007 3:32 pm
Location: Over the pond unfortunately.

Re: Perfection heaters

Post by gamekeeper »

WOW, That looks great Lenn...... :D
If more men loved and cherished their wives as much as I love bacon the world would be a much better place.
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Thanks buddy, it`s a beauty. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
piller
Posting leader...
Posts: 15188
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Perfection heaters

Post by piller »

It is a beauty.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
coyote nose
Levergunner 2.0
Posts: 476
Joined: Fri Sep 21, 2007 11:25 am
Location: NE Ohio

Re: Perfection heaters

Post by coyote nose »

Blaine wrote: Thu Jun 03, 2021 6:21 pm
black river smith wrote: Wed Jun 02, 2021 8:00 pm Pitchy,
What material did you use for the window? The original material was a pressed mylar, I think. One of mine has a torn window, I would not mind replacing it and the other is very cloudy.
We always called it isinglass on the old Moore Stoves, which is a type of mica (or IS mica)
Isinglass is not mica. Isinglass is, believe it or not, dried fish bladder!! Mica is a silicate mineral.
"...for there is a cloud on my horizon...and its name is progress." E. Abbey, 1958
User avatar
Pitchy
Advanced Levergunner
Posts: 13136
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: Perfection heaters

Post by Pitchy »

Thanks Brian. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Post Reply