OT-Colt SAA
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- marlinman93
- Advanced Levergunner
- Posts: 6596
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
OT-Colt SAA
Went to a crummy gun show this morning, but did find what I think was a good buy on a Colt SAA. It's a .357 magnum, with 5 1/2" barrel, made in 1978, and still NIB!
Seller had it priced at $1250, but after a short haggling process I got out the door at $950. I've always wanted one, and thought this was a good deal for an unfired early 3rd Gen Colt.
Mainspring seems a bit heavier than my AWA .45 SAA, but the trigger is crisp and clean. It wont stay unfired for long!
Seller had it priced at $1250, but after a short haggling process I got out the door at $950. I've always wanted one, and thought this was a good deal for an unfired early 3rd Gen Colt.
Mainspring seems a bit heavier than my AWA .45 SAA, but the trigger is crisp and clean. It wont stay unfired for long!
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- Sixgun
- Posting leader...
- Posts: 19131
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Marlinman, Good snag. Like you said, the early 3rd's have a nicer fit & finish, plus you get the nice wood grain box, not some stupid looking blue piece of modern junk plastic.
My experience with Colt handguns chambered in .357 are most always better shooters than S&W. Pythons and SAA's slug out at .357 as opposed to S&W's .358, along with tighter chamber mouths of the Colts. (hey! what are you doing with handgun and a semi-modern at that?)
My experience with Colt handguns chambered in .357 are most always better shooters than S&W. Pythons and SAA's slug out at .357 as opposed to S&W's .358, along with tighter chamber mouths of the Colts. (hey! what are you doing with handgun and a semi-modern at that?)
-
- Advanced Levergunner
- Posts: 4923
- Joined: Sat Dec 22, 2007 1:08 am
- Location: Arizona headed for New Mexico
- Old Savage
- Posting leader...
- Posts: 16787
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
- marlinman93
- Advanced Levergunner
- Posts: 6596
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Yea, wood grain box, with strofoam insert.Sixgun wrote:Marlinman, Good snag. Like you said, the early 3rd's have a nicer fit & finish, plus you get the nice wood grain box, not some stupid looking blue piece of modern junk plastic.
My experience with Colt handguns chambered in .357 are most always better shooters than S&W. Pythons and SAA's slug out at .357 as opposed to S&W's .358, along with tighter chamber mouths of the Colts. (hey! what are you doing with handgun and a semi-modern at that?)
Thanks for the info. As I said, I've always admired and lusted for a real Colt, but they seemed to keep increasing in value at such a rate that I just couldn't justify the prices.
I had a 7 1/2" SAA in .357 before, but didn't care for the long barel's balance. Traded it for an original 1875 Rem. .44-40. This 5 1/2" has really good balance
.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
mm93,
Well it looks like you got more than a Marlin and Ballard magnet!
I think you did really good! I've never had a real COLT to compare them to but I know my U.S. Firearms single actions sure bring me a lot of happiness.
I got a new generation Smith&Wesson Schofield to compare the balance and feel of the Colts to and there is NO COMPARISON! Colt knew what they were doing when they used the Navy grip frame size and geez it just feels great in your hand.
I agree with you on barrel length too. I got that Nettleton .45SAA, then I got a 4 3/4" .45 also and when and if I order one in .38-40 it'll be either 4 3/4" or the 5 1/2" like you just got. Won't be another 7 1/2", I just like the feel of the shorter guns better. But you just about have to try them all to see what works and feels best for you. That's what I'm in the process of doing.
Also I like the fact you are going to shoot this nice little Colt! No sense leaving them tucked away. Great attitude!
Geoff
Well it looks like you got more than a Marlin and Ballard magnet!
I think you did really good! I've never had a real COLT to compare them to but I know my U.S. Firearms single actions sure bring me a lot of happiness.
I got a new generation Smith&Wesson Schofield to compare the balance and feel of the Colts to and there is NO COMPARISON! Colt knew what they were doing when they used the Navy grip frame size and geez it just feels great in your hand.
I agree with you on barrel length too. I got that Nettleton .45SAA, then I got a 4 3/4" .45 also and when and if I order one in .38-40 it'll be either 4 3/4" or the 5 1/2" like you just got. Won't be another 7 1/2", I just like the feel of the shorter guns better. But you just about have to try them all to see what works and feels best for you. That's what I'm in the process of doing.
Also I like the fact you are going to shoot this nice little Colt! No sense leaving them tucked away. Great attitude!
Geoff
-
- Advanced Levergunner
- Posts: 2427
- Joined: Thu Sep 06, 2007 8:37 pm
- Location: Texas
-
- Advanced Levergunner
- Posts: 5493
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Vall, you did plumb good on that deal like I told you before God will still smile on us when He wants to. I bought my Colt .45 SAA 5 1/2 inch in 1959 and it is still my main carry piece most of the time.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15
- Ysabel Kid
- Moderator
- Posts: 28131
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
What stupid looking blue piece of modern junk plasticSixgun wrote:Marlinman, Good snag. Like you said, the early 3rd's have a nicer fit & finish, plus you get the nice wood grain box, not some stupid looking blue piece of modern junk plastic.
My experience with Colt handguns chambered in .357 are most always better shooters than S&W. Pythons and SAA's slug out at .357 as opposed to S&W's .358, along with tighter chamber mouths of the Colts. (hey! what are you doing with handgun and a semi-modern at that?)
"the early 3rd's have a nicer fit & finish" (hummm )
- Sixgun
- Posting leader...
- Posts: 19131
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
casastahle wrote:
What stupid looking blue piece of modern junk plastic
"the early 3rd's have a nicer fit & finish" (hummm )
Casastahle,
Yes, I should have remembered they got better after a junk period of about 10 years. There was a time when fit and finish declined and when you bought one, it came in a ugly blue plastic box. This was in the late eighties and early nineties when they retailed for about $900. I have a few and they all needed a complete takedown and polishing of parts.
fast forward a few years and they started coming in nice boxes like yours and they were tuned much better. I have only bought 2 of them but have yet to shoot 'em as I had 'em custom serialed numbered. The below SA Colt is not mine but belongs to a guy out West who bought it from my buddy Tom. It was a Colt showpiece at the Shot Show in 2001. Was master engraved by John Adams Sr.----Has a full blue frame and if you notice, no screws through the frame.-----ONE piece ivories with solid gold medallions.------------She's a beauty
I bought a NIB 32-20, with the 7.5" barrel, last year. Dealer sold it to me for $1125 because the "new" blue box had a couple of splits in the corner. It was everthing I had hoped for.
Vall,
I know you're doing like I did and just sat at home cocking it and listening to the CLICK....CLICK.....CLICK......CLICK .
Vall,
I know you're doing like I did and just sat at home cocking it and listening to the CLICK....CLICK.....CLICK......CLICK .
-
- Levergunner 2.0
- Posts: 275
- Joined: Fri Sep 07, 2007 4:06 pm
- Location: San Antonio, Republic of Texas
- Sixgun
- Posting leader...
- Posts: 19131
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Griff,Griff wrote:Sixgun,
I recall that gun, somewhere I saw the secret as to how it's assembled.
One night we were playing around Targetmaster and I tell Tom that I'm gonna take that engraved SA apart to see what made it tick. He knows I can take one completely apart and back again in a couple of minutes. He tells me if I take that screwless frame SA Colt apart, he's going outside and is going to start working on my Jeep Rubicon with an 1911 loaded with Cor-Bons -----------------Sixgun
- marlinman93
- Advanced Levergunner
- Posts: 6596
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
I've got three clones too. An AWA .45 Colt, a Cimarron Uberti .32-20, ad a very early Ubert adjustable sight .38 Spl. with the brass grip frame.
I actually like them all, and they shoot well. The early Uberti broke the hammer notch years ago, and I replaced the hammer and pawl with a Colt SAA version. It's been great since that one repair.
The AWA has the nicest action, even lighter than the Colt, but not as crisp. I think I'll probably replace the mainspring, (or rework it) on the Colt, as it seems too heavy when cocking it. Other than that it's much nicer fit and finish than the others.
I actually like them all, and they shoot well. The early Uberti broke the hammer notch years ago, and I replaced the hammer and pawl with a Colt SAA version. It's been great since that one repair.
The AWA has the nicest action, even lighter than the Colt, but not as crisp. I think I'll probably replace the mainspring, (or rework it) on the Colt, as it seems too heavy when cocking it. Other than that it's much nicer fit and finish than the others.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- Griff
- Posting leader...
- Posts: 20976
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Sixgun wrote:Griff,Griff wrote:Sixgun,
I recall that gun, somewhere I saw the secret as to how it's assembled.
One night we were playing around Targetmaster and I tell Tom that I'm gonna take that engraved SA apart to see what made it tick. He knows I can take one completely apart and back again in a couple of minutes. He tells me if I take that screwless frame SA Colt apart, he's going outside and is going to start working on my Jeep Rubicon with an 1911 loaded with Cor-Bons -----------------Sixgun
I think I'd go real slow on taking his Colt apart! I wouldn't worry too much, they built plenty of Jeep Rubicons. You do have comprehensive, right?
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!