Make a spoon ring
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Make a spoon ring
Made a ring from a old silver spoon , heat it red hot and let cool to soften it up then bend it around something the size ya want.
Turned out nice.
Turned out nice.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Make a spoon ring
Man, you are LATE to the party.
Had one of those in '69 & wore it for several years till my finger put on too much weight.
Still have it someplace, with a good deal of the pattern worn off & one edge thinned almost sharp enough to cut with.
If it still fit, I'd still be wearing it.
Denis
Had one of those in '69 & wore it for several years till my finger put on too much weight.
Still have it someplace, with a good deal of the pattern worn off & one edge thinned almost sharp enough to cut with.
If it still fit, I'd still be wearing it.
Denis
- Old Ironsights
- Posting leader...
- Posts: 15084
- Joined: Mon Apr 02, 2007 9:27 am
- Location: Waiting for the Collapse
- Contact:
Re: Make a spoon ring
Those are called Joint/Prison Rings... and they are that way for a reason...DPris wrote:Man, you are LATE to the party.
Had one of those in '69 & wore it for several years till my finger put on too much weight.
Still have it someplace, with a good deal of the pattern worn off & one edge thinned almost sharp enough to cut with.
If it still fit, I'd still be wearing it.
Denis
Wear one of those back east for instant "old con" respect...
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
Re: Make a spoon ring
We always figured they were more of the hippy period, still cool.
The ones made from coins are neat too.
The ones made from coins are neat too.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Make a spoon ring
Further back enlisted men made them for wedding rings, silver coins were cheaper than rings.
Re: Make a spoon ring
Old,
I'll keep that in mind if I ever go back East again.
In my case, the edge didn't start out that way, it happened naturally on its own over a period of several years of wearing it.
Pitchy,
The tail end of the Hippy Era's when I got it, you're right on with the association. Picked it up from a tray of several at a head shop someplace I disremember.
I had it all of my senior year of highschool, so it would've been '68 actually when I got it.
Denis
I'll keep that in mind if I ever go back East again.
In my case, the edge didn't start out that way, it happened naturally on its own over a period of several years of wearing it.
Pitchy,
The tail end of the Hippy Era's when I got it, you're right on with the association. Picked it up from a tray of several at a head shop someplace I disremember.
I had it all of my senior year of highschool, so it would've been '68 actually when I got it.
Denis
Re: Make a spoon ring
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Make a spoon ring
Wowsers!
I DO like that idea.
Denis
I DO like that idea.
Denis
Re: Make a spoon ring
Nice sound track too.
Re: Make a spoon ring
I tried making one from a modern quarter and it didn`t work well.
Also ya have to use a plastic mallet or you`ll ruin the text on the coing.
I chucked the coin and drilled a half inch hole in it, then put it on a tapered mandrel and hammered it over.
Pretty easy but ya gotta be gentle
Also ya have to use a plastic mallet or you`ll ruin the text on the coing.
I chucked the coin and drilled a half inch hole in it, then put it on a tapered mandrel and hammered it over.
Pretty easy but ya gotta be gentle
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Make a spoon ring
Gentle is not my strong suit.
Neither is coordination.
Denis
Neither is coordination.
Denis
-
- Levergunner 2.0
- Posts: 431
- Joined: Sun Apr 01, 2007 7:56 pm
Re: Make a spoon ring
Interesting! Is the ring sterling silver, plated, or?
Reason I ask is that sterling seems to be relatively soft.
If using a sterling spoon, would it be likely to hold up well
over time, and would heating it still be required?
Thanks for sharing!
John
Reason I ask is that sterling seems to be relatively soft.
If using a sterling spoon, would it be likely to hold up well
over time, and would heating it still be required?
Thanks for sharing!
John
"Pistols do not win wars, but they save the lives of the men who do. The noble 1911 is a mechanical marvel, whose ruggedness, dependability & ferocious power have comforted four issues of GIs and which, unlike any other instrument you can name, is as much superior to its rivals today as it was in 1917."
-Col. Jeff Cooper, 1968
-Col. Jeff Cooper, 1968
Re: Make a spoon ring
Not sure, it was a very old spoon so i`d think so.John in MS wrote:Interesting! Is the ring sterling silver, plated, or?
Reason I ask is that sterling seems to be relatively soft.
If using a sterling spoon, would it be likely to hold up well
over time, and would heating it still be required?
Thanks for sharing!
John
After you heat it it will turn black but will polish up again and the heat makes it bend easy.
Do a google about it and you`ll find lots of info also.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: Make a spoon ring
Dang you Pitchy !!! Now I have another new hobby to get into.
I don't have time for all of my hobbies now!!
Thanks for sharing though!
I don't have time for all of my hobbies now!!
Thanks for sharing though!
- kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: Make a spoon ring
That's neat, Pitchy. Again, you're one talented dude.
Those coin rings are something too.
Those coin rings are something too.
Old Law Dawg
-
- Levergunner 2.0
- Posts: 367
- Joined: Sat Oct 25, 2008 8:43 pm
- Location: San Juan Island, WA
Re: Make a spoon ring
Boy, was I way off. I was going to say hang the spoon with a string and smack it with a hammer. To quote Yoda, "Egg on my face I have."
Bob from Friday Harbor
Bob from Friday Harbor
Don't look back something might be gaining on you.
-Leroy "Satchel" Paige
-Leroy "Satchel" Paige
Re: Make a spoon ring
When I was in school one of my buddies used to make rings from coins using a nail that was sticking out of a board and a big serving spoon he used for a mallet. A pure silver dime made a nice ring for the girls.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: Make a spoon ring
soon 2 retire wrote:Boy, was I way off. I was going to say hang the spoon with a string and smack it with a hammer. To quote Yoda, "Egg on my face I have."
Bob from Friday Harbor
Rusty, i had a friend in school that made them too, never forgot it and thought i`d check into it again.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.