I found these old printers blocks awhile back. They are the most difficult to find, a Winchester 1873 SRC and a engraved Colt SAA 7 1/2 inch barrel. The measurements are 5 inches by 2 1/4 inches. I thought y'all might like to see them.
Notice the eagle on the custom grips.
Old printers blocks of Win 1873 SRC & Engraved Colt SAA
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Advanced Levergunner
- Posts: 2427
- Joined: Thu Sep 06, 2007 8:37 pm
- Location: Texas
Old printers blocks of Win 1873 SRC & Engraved Colt SAA
"That'll Be The Day"
- Andrew
- Advanced Levergunner
- Posts: 2043
- Joined: Thu Sep 06, 2007 5:30 pm
- Location: Southern Missouri
Re: Old printers blocks of Win 1873 SRC & Engraved Colt SAA
That is really cool. I have never seen a printing block like that.
Re: Old printers blocks of Win 1873 SRC & Engraved Colt SAA
your going to have to raise the price of admission to the museum with all the kewl stuff you find!!
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
-
- Advanced Levergunner
- Posts: 2427
- Joined: Thu Sep 06, 2007 8:37 pm
- Location: Texas
Re: Old printers blocks of Win 1873 SRC & Engraved Colt SAA
Like I said, they are hard to find. In my 40 years of collecting this is the first I have seen. You know there must be many around because of the printing of catalogs and advertisements in the old days, but try and find them. Not so easy. I would think a engraved Colt 7 1/2 SAA and a Winchester 1873 SRC are at the top of the list of desirability. I know they are in my case.
"That'll Be The Day"
Re: Old printers blocks of Win 1873 SRC & Engraved Colt SAA
looks like a very nice job of engraving as well.
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
Re: Old printers blocks of Win 1873 SRC & Engraved Colt SAA
Very interesting printer's blocks. i have found many over the years, but most pertained to glass container labels and trade cards.
I looked at about 20+ 1873 carbines yesterday at Reno. At today's asking prices, not many moved. I saw some 99% ones and some less than 10% ones. The price varied from $1250 to $14K. It appears to me that many of the same guns that haven't sold previously were marked up another 25-40% for this year's WACA show. It'll get worse as time goes on. The real clunkers that I wouldn't even touch were priced at over a G. My comments to some folks were not appreciated. They have to understand that not every example of a much desired gun is "golden".
I looked at about 20+ 1873 carbines yesterday at Reno. At today's asking prices, not many moved. I saw some 99% ones and some less than 10% ones. The price varied from $1250 to $14K. It appears to me that many of the same guns that haven't sold previously were marked up another 25-40% for this year's WACA show. It'll get worse as time goes on. The real clunkers that I wouldn't even touch were priced at over a G. My comments to some folks were not appreciated. They have to understand that not every example of a much desired gun is "golden".
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln