Winchester 92 Question for Steve Young?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 2.0
- Posts: 132
- Joined: Mon Sep 03, 2007 5:34 pm
- Location: Big Sky Country
Winchester 92 Question for Steve Young?
I have a current post about 92 replicas...You being the aficionado on such rifles, here is what I've been thinking in the way of a 92 in .45 Colt.
I have owned a Winchester 71 and still currently own a Browning 71. I have also owned a Winchester 64 and currently own 3 Marlin 336A's. (The early ones with pistol grip, 2/3's magazine and 24" barrel). I love the configuration of PG, 2/3's magazine and 24 inch barrel.
What is the availability for barrels and a new PG buttstock for the 92"s? Replace the barrel and (lower part of the receiver???) to take the new pistol grip stock. Other concerns? I know, as a friend used to always say, with enough money and time, anything can be done, but is this reasonably feasible or lots of money?
Thanks for your time and help!
I have owned a Winchester 71 and still currently own a Browning 71. I have also owned a Winchester 64 and currently own 3 Marlin 336A's. (The early ones with pistol grip, 2/3's magazine and 24" barrel). I love the configuration of PG, 2/3's magazine and 24 inch barrel.
What is the availability for barrels and a new PG buttstock for the 92"s? Replace the barrel and (lower part of the receiver???) to take the new pistol grip stock. Other concerns? I know, as a friend used to always say, with enough money and time, anything can be done, but is this reasonably feasible or lots of money?
Thanks for your time and help!
"Be kind and polite to everyone you meet; but have a plan on how to kill them." General Mattis
-
- Levergunner 2.0
- Posts: 132
- Joined: Mon Sep 03, 2007 5:34 pm
- Location: Big Sky Country
Re: Winchester 92 Question for Steve Young?
ttt
"Be kind and polite to everyone you meet; but have a plan on how to kill them." General Mattis
-
- Levergunner 3.0
- Posts: 739
- Joined: Mon Dec 17, 2007 3:40 pm
- Location: utah
Re: Winchester 92 Question for Steve Young?
I also like your basic idea. Years ago I had "in`s" with some good cheap gunsmiths and had stuff like that done. I had a shotout no finish 92 in 25-20 that I had the barrel rerifled to .357 mag. Bought new wood, reblued and it was hard to tell from new. Another time had a old 73 in same shape and had it converted to .38 special. Didnt cost a fraction what it would now. (35 years ago). Go to this lead to see a refinished 65. I also am posting a picture of a old win 90 I own that someone before me had pistol gripped probley by heating and bending the tangs and added a fancy wood stock with cheek piece and checkering. It was in .22 WRF. I had my smith ream it and convert it to .22 WMRF. I would look for a beatup winchester model 65 and redue it, of find a browning 65 repro. Good luck! All it takes is money!
http://www.gunrunnerauctions.com/listin ... =917996469
![Image](http://i99.photobucket.com/albums/l320/feralmerril/winm90675385A-2.jpg)
http://www.gunrunnerauctions.com/listin ... =917996469
![Image](http://i99.photobucket.com/albums/l320/feralmerril/winm90675385A-2.jpg)
-
- Site Sponsor
- Posts: 2507
- Joined: Fri Sep 07, 2007 12:05 pm
- Location: Lampasas, Texas
- Contact:
Re: Winchester 92 Question for Steve Young?
Custom barrels are certainly available but that would be a blank turned and threaded to the configuration you want$$$$. I had thought about using one of the Rossi straight octagons and have it turned half round. So there are some barrel options. I think Precision Gunworks still makes a pistol grip stock for the 92/94 and it can be adapted to the Rossi, so wood wouldn't be a problem. The problem is finding a bent lever and lower tang for the pistol grip stock. I've only seen one so I bought it. I might sell it if you are serious about doing this. If you are email me.Henry McCann wrote:I have a current post about 92 replicas...You being the aficionado on such rifles, here is what I've been thinking in the way of a 92 in .45 Colt.
I have owned a Winchester 71 and still currently own a Browning 71. I have also owned a Winchester 64 and currently own 3 Marlin 336A's. (The early ones with pistol grip, 2/3's magazine and 24" barrel). I love the configuration of PG, 2/3's magazine and 24 inch barrel.
What is the availability for barrels and a new PG buttstock for the 92"s? Replace the barrel and (lower part of the receiver???) to take the new pistol grip stock. Other concerns? I know, as a friend used to always say, with enough money and time, anything can be done, but is this reasonably feasible or lots of money?
Thanks for your time and help!
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
![Image](https://scontent-a.xx.fbcdn.net/hphotos-prn2/t1/1902863_744778658923178_1272284486_n.jpg)
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
![Image](https://scontent-a.xx.fbcdn.net/hphotos-prn2/t1/1902863_744778658923178_1272284486_n.jpg)
Re: Winchester 92 Question for Steve Young?
We think along similar lines, Henry. I lust for a 26 or 28 in round barrel over a button magazine, but I do like straight stocks. NKJ's suggestion to use a half round barrel is interesting...
Re: Winchester 92 Question for Steve Young?
What if you started with one of the Browning model 53's?
-
- Advanced Levergunner
- Posts: 2427
- Joined: Thu Sep 06, 2007 8:37 pm
- Location: Texas
Re: Winchester 92 Question for Steve Young?
KWK, would it look something like this. Only this is a 1915 30-30 "94" Winchester. It was a special order with button mag, half round barrel and express sight. The bad part is that it has been re-blued and the stock refinished but it shoots great.
Sorry for the photo. I took it on the floor with a flash.
![Image](http://i43.photobucket.com/albums/e372/rangerider72/DCP_6394.jpg)
![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://i43.photobucket.com/albums/e372/rangerider72/DCP_6394.jpg)
"That'll Be The Day"
Re: Winchester 92 Question for Steve Young?
Yes, that's just about what I have in mind -- nice gun!
Re: Winchester 92 Question for Steve Young?
saw a 94 like rangerider's only in 25-35 at a gunshow last weekend,it was a parts rifle and painted black, offered 300.00 but the seller would not budge.
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
-
- Levergunner 2.0
- Posts: 387
- Joined: Fri Apr 06, 2007 10:26 pm
- Location: Lexington, NC
Re: Winchester 92 Question for Steve Young?
![Image](http://pic20.picturetrail.com/VOL1584/6553559/12658939/341582433.jpg)
I have an early Interarms Rossi 45 Colt with a half-octagon, half round barrel. If I don't get it traded in the next few days, I would probably sell it to you for $500, shipped. It's like new in the box with the paperwork. It even came with a longer tang screw for use with a tang sight. I can take some better pictures, if you are interested.
-
- Levergunner 2.0
- Posts: 132
- Joined: Mon Sep 03, 2007 5:34 pm
- Location: Big Sky Country
Re: Winchester 92 Question for Steve Young?
Thanks to all, especially Steve...I definitely have some options to think about. Steve, let me decide how serious I am about this, in regards to the lever and lower tang.
As much as I love the look of a PG, 2/3's magazine and 24" barrel, that 94 of rangerider7 with the button mag and straight grip is one good looking levergun. Plus, that configuration would save me on lever, lower tang and new buttstock.
edwardyoung, Does the Rossi have a 24" barrel?
Thanks again to all. I used to have a Browning 53 and 65 and loved those rifles; but they were sold when a full time job became a part time job and a move to another part of the state.
As much as I love the look of a PG, 2/3's magazine and 24" barrel, that 94 of rangerider7 with the button mag and straight grip is one good looking levergun. Plus, that configuration would save me on lever, lower tang and new buttstock.
edwardyoung, Does the Rossi have a 24" barrel?
Thanks again to all. I used to have a Browning 53 and 65 and loved those rifles; but they were sold when a full time job became a part time job and a move to another part of the state.
"Be kind and polite to everyone you meet; but have a plan on how to kill them." General Mattis
-
- Levergunner 2.0
- Posts: 387
- Joined: Fri Apr 06, 2007 10:26 pm
- Location: Lexington, NC
Re: Winchester 92 Question for Steve Young?
Yes. 24" barrel. The trade I had in the works isn't going to happen; so if you want it, let me know. If you have a 357 lever action rifle to trade, I might be interested. That is what I was working on with the other guy. ThanksHenry McCann wrote:edwardyoung, Does the Rossi have a 24" barrel?
-
- Levergunner 2.0
- Posts: 132
- Joined: Mon Sep 03, 2007 5:34 pm
- Location: Big Sky Country
Re: Winchester 92 Question for Steve Young?
edwardyoung,
Thanks for the offer, but not at this time.
Thanks for the offer, but not at this time.
"Be kind and polite to everyone you meet; but have a plan on how to kill them." General Mattis
Re: Winchester 92 Question for Steve Young?
Henry, I attempted to send you a PM regarding something you mentioned in this thread. The site said it was sent successfully, but I I noticed it is sitting in the outbox. Thanx for any help, jd45
-
- Levergunner 2.0
- Posts: 179
- Joined: Sun Sep 09, 2007 10:33 am
- Location: Ashland, KY
Re: Winchester 92 Question for Steve Young?
EdwardYoung, that's the same rifle I have. Yours is the only other one I've seen--I bought mine used about five years ago. It is an Interarms Rossi, pre-safety, of course.
Steve Young, were very many of these made ? I really like the looks of the 1/2 round barrel, but the carbine-style barrel band is slightly diffrent from the ones on the carbines--something do do with the taper of the barrel, I think--and it requires a longer magazine plug screw. The one I have has a problem with the screw constantly jarring loose under recoil, even with cowboy loads, and the mag tube then backs 'forward' a few inches, sending the groups down and to the left. Kinda frustrating.
Steve Young, were very many of these made ? I really like the looks of the 1/2 round barrel, but the carbine-style barrel band is slightly diffrent from the ones on the carbines--something do do with the taper of the barrel, I think--and it requires a longer magazine plug screw. The one I have has a problem with the screw constantly jarring loose under recoil, even with cowboy loads, and the mag tube then backs 'forward' a few inches, sending the groups down and to the left. Kinda frustrating.
-
- Levergunner 2.0
- Posts: 132
- Joined: Mon Sep 03, 2007 5:34 pm
- Location: Big Sky Country
Re: Winchester 92 Question for Steve Young?
jd45 and edwardyoung you have PM's.
"Be kind and polite to everyone you meet; but have a plan on how to kill them." General Mattis