Casting - lube question
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- Ysabel Kid
- Moderator
- Posts: 28302
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Casting - lube question
Well, there are several posts out now on casting. Must be the cooler weather coming in.
So, getting ready for the "casting season", I'm thinking about bullet lube. For my cap & ball paper cartridges, I use a mix of beeswax and lambs tallow. What is your favorite lube for smokeless powder loads? Thinking revolver loads, .38 Special, .44 Russian, and .45 Colt.
Thanks!
So, getting ready for the "casting season", I'm thinking about bullet lube. For my cap & ball paper cartridges, I use a mix of beeswax and lambs tallow. What is your favorite lube for smokeless powder loads? Thinking revolver loads, .38 Special, .44 Russian, and .45 Colt.
Thanks!
Re: Casting - lube question
Based upon Glen Fryxell's recommendation (the man who John Taffin says knows more about casting than anyone he's ever met) I use 50% beeswax, 50% Sta-lube automotive grease made up of moly, graphite and lithium, melted on a Coleman stove outside and poured into molds made of PVC tubing. It's the best bullet lube I have ever used in 48 years of casting. It's messy and it works great.
Re: Casting - lube question
I have not used anything except Paco's Apache Blue bullet lube that he used to make ... for 30 years now. In fact, today I sized and lubedabout 1200 bullets. 700 or so were the Lyman 358665 the rest were split between 228 gr. 45 ACP roundnose and the Lyman 429421 Keith .44 SWC.
- Griff
- Posting leader...
- Posts: 21052
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Casting - lube question
Lyman's "ideal" bullet lube. I don't load anything to magnum velocities, so I don't really need the wax type lubes. And with both rifle & pistol loads, this has worked for me.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- ollogger
- Advanced Levergunner
- Posts: 2841
- Joined: Mon Jul 05, 2010 2:47 pm
- Location: Wheatland Wyoming
- Contact:
Re: Casting - lube question
Been using Lee liquid Alox for around 20 years, works for me
Brad
Brad
Re: Casting - lube question
Jim, you must have a heck of a strong arm. I don't believe I could cast even 350 bullets with those heavy 4 cavity Lyman molds in one session. I've pretty much given up on anything but 2 cavity iron molds and much prefer the aluminum mold blocks from Accurate Molds.
Re: Casting - lube question
I am not as strong as I once was, but I still enjoy casting. And I prefer the cast iron molds even though I have aluminum ones. I like the way they feel ... the way they retain heat ... and the way they work. Just a personal preference. My aluminum molds make wonderfully accurate bullets but I prefer the iron. Four cavity is as big as I want to go, though.Walt wrote: ↑Fri Nov 01, 2024 7:57 pm Jim, you must have a heck of a strong arm. I don't believe I could cast even 350 bullets with those heavy 4 cavity Lyman molds in one session. I've pretty much given up on anything but 2 cavity iron molds and much prefer the aluminum mold blocks from Accurate Molds.
Re: Casting - lube question
That stuff’s great, had great luck with rifle and handgun loads, and it’s cheap!Walt wrote: ↑Fri Nov 01, 2024 7:30 pm Based upon Glen Fryxell's recommendation (the man who John Taffin says knows more about casting than anyone he's ever met) I use 50% beeswax, 50% Sta-lube automotive grease made up of moly, graphite and lithium, melted on a Coleman stove outside and poured into molds made of PVC tubing. It's the best bullet lube I have ever used in 48 years of casting. It's messy and it works great.
-
- Senior Levergunner
- Posts: 1073
- Joined: Wed Jan 28, 2009 9:12 pm
- Location: Bushwhacker Capitol, Missouri
Re: Casting - lube question
Liquid Alox works for everything I load including BP.
Re: Casting - lube question
I've posted this several times before. Bulk lubes of all kinds. Warning, they cite a significant price increase in their raw materials and passed on to customers.
https://www.lsstuff.com/store/
https://www.lsstuff.com/store/
m.A.g.a. !
Re: Casting - lube question
I have a few sticks of Apache Blue I use for zippy loads and 50:50 Alox 2138F:beeswax for everything else.
https://castbulletassoc.org/uploads/new ... be2016.pdf
https://castbulletassoc.org/uploads/new ... be2016.pdf
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
- LeverGunner
- Levergunner 2.0
- Posts: 427
- Joined: Mon Mar 18, 2024 11:27 am
- Location: Cecilia, Kentucky
- Contact:
Re: Casting - lube question
I have a goodly stash of White Label 50/50, which I use for everything. I have used his BAC and it was okay but 50/50 seems to give me less leading in guns that are a little bit problematic.
I've been wanting to make some Felix lube to try, but I got a passel of moulds to mess with.
I've been wanting to make some Felix lube to try, but I got a passel of moulds to mess with.
The Lord is my shepherd; I shall not want.
BulletMatch: Cataloging the World's Bullets.
Lead Alloy Calculator
BulletMatch: Cataloging the World's Bullets.
Lead Alloy Calculator
- Steve in MO
- Levergunner 1.0
- Posts: 76
- Joined: Sun Aug 15, 2021 3:54 pm
- Location: SW MO
Re: Casting - lube question
I went to powder coating. Less mess and seems to work with plinking loads and heavy loads equally well.
"When the shooting stops, and the dead are buried, and the politicians take over; it all adds up to one thing: a lost cause."
- LeverGunner
- Levergunner 2.0
- Posts: 427
- Joined: Mon Mar 18, 2024 11:27 am
- Location: Cecilia, Kentucky
- Contact:
Re: Casting - lube question
I'm going to get into powder coating also, I just haven't taken the plunge yet. I have about most everything though. I have a couple moulds that would benefit from an extra .001 diameter.Steve in MO wrote: ↑Sat Nov 02, 2024 9:38 am I went to powder coating. Less mess and seems to work with plinking loads and heavy loads equally well.
The Lord is my shepherd; I shall not want.
BulletMatch: Cataloging the World's Bullets.
Lead Alloy Calculator
BulletMatch: Cataloging the World's Bullets.
Lead Alloy Calculator
- marlinman93
- Advanced Levergunner
- Posts: 6682
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Casting - lube question
I use Wind's Wonder Wax on everything from rifles to handguns with cast bullets. I mix it up, and pour it in my Lyman lubrisizer, or pan lube large rifle bullets.
50% bees wax, 40% Crisco, and 10% Vaseline by weight.
50% bees wax, 40% Crisco, and 10% Vaseline by weight.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- Shasta
- Senior Levergunner
- Posts: 1566
- Joined: Thu Sep 06, 2007 10:50 pm
- Location: Shasta County, the far right stronghold in California
Re: Casting - lube question
I will second Ray's endorsement of White Label lube products. I use their black powder lube and for smokeless loads I like either their BAC or their Blue Carnauba. They have great products and are very reasonably priced. You can even get a free sample if you just want to try try a certain lube.
Shasta
Shasta
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
Re: Casting - lube question
With both Paco and Veral out of the game, is there any possibility that the Apache Blue recipe will turn up in the public domain?
Re: Casting - lube question
I usta have two Lyman 4500’s on the bench one held SPG lube and no need for a heater . Later I bought the second 4500 with the little electrode heater in the back , I tried a number of hard lubes and eventually settled on Thompsons Blue Magic I think it’s called .
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
Re: Casting - lube question
Loved Paco's AB lube but since I can't get it anymore, I use White Label Caranuba Blue lube on pretty well all smokeless loads without any issues. I powder coat some Boolits and on some rifle slugs that I plan on going above 2000fps, I coat the boolit with a much thinned LLA before I run them thru the Star. That way the nose of the boolit that would ride on the rifling is lubed.
Re: Casting - lube question
In the past I have used GAR 50/50, LBT Blue, and others before settling on Carnauba Red.
I recently mixed up a batch of Ben's Red and have loaded some into the Star, but need to cast some bullets to see how it compares to the previous lubes.
I recently mixed up a batch of Ben's Red and have loaded some into the Star, but need to cast some bullets to see how it compares to the previous lubes.
- Ysabel Kid
- Moderator
- Posts: 28302
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Casting - lube question
Oh please, please, please, pretty-please!
- AJMD429
- Posting leader...
- Posts: 32929
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Casting - lube question
.
Lots of folks who I've talked to seem to like the Alox. It's pretty much all I've used, but I've done VERY little in terms of casting. I've loaded tons of bullets OTHERS have cast and lubed, and will say some of the harder stuff bullets I've bought had on them sometimes just falls off and makes a mess.
Lots of folks who I've talked to seem to like the Alox. It's pretty much all I've used, but I've done VERY little in terms of casting. I've loaded tons of bullets OTHERS have cast and lubed, and will say some of the harder stuff bullets I've bought had on them sometimes just falls off and makes a mess.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: Casting - lube question
I used to cast bullets in relatively large groups then lubrisize them and put them in plastic containers with tops . Anyway when lubed with SPG they most certainly will dry and start to crack and pop out as they loose moisture , the Thompson’s Blue Magic has never done that to me .AJMD429 wrote: ↑Sun Nov 03, 2024 9:32 pm .
Lots of folks who I've talked to seem to like the Alox. It's pretty much all I've used, but I've done VERY little in terms of casting. I've loaded tons of bullets OTHERS have cast and lubed, and will say some of the harder stuff bullets I've bought had on them sometimes just falls off and makes a mess.
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
- Scott Tschirhart
- Advanced Levergunner
- Posts: 4700
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Casting - lube question
This mirrors my experience.Walt wrote: ↑Fri Nov 01, 2024 7:30 pm Based upon Glen Fryxell's recommendation (the man who John Taffin says knows more about casting than anyone he's ever met) I use 50% beeswax, 50% Sta-lube automotive grease made up of moly, graphite and lithium, melted on a Coleman stove outside and poured into molds made of PVC tubing. It's the best bullet lube I have ever used in 48 years of casting. It's messy and it works great.
Re: Casting - lube question
I talked with Paco and he said he would write out the formula and that I can share it here. He said it may take some time because he has to find his notes on what all he used, how much, etc. and he is not exactly sure where it's at. It's been more than 20 years since he has messed with it. If he gets it together and sends it to me I will post it here for anyone who is interested.
- Scott Tschirhart
- Advanced Levergunner
- Posts: 4700
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Casting - lube question
Thanks Jim. I still have a small tin of it. But I’ve been hesitant to use it.
Re: Casting - lube question
That would be great if he can dig it up, thanks! I'm in a similar situation as Scott, having 2 sticks of LBT Blue in my stash for a rainy day.
Re: Casting - lube question
When I cast bullets, I used the Lyman Alox for years, but I once tried a mix of toilet ring wax and candle wax. I still have some bullets with that mix and it seems to work fine.
- Ysabel Kid
- Moderator
- Posts: 28302
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Casting - lube question
JimT wrote: ↑Thu Nov 07, 2024 8:19 am I talked with Paco and he said he would write out the formula and that I can share it here. He said it may take some time because he has to find his notes on what all he used, how much, etc. and he is not exactly sure where it's at. It's been more than 20 years since he has messed with it. If he gets it together and sends it to me I will post it here for anyone who is interested.
Re: Casting - lube question
Probably some of the stuff he used in Apache Blue is no longer available. Was great stuff and was sad when I was about out.
- marlinman93
- Advanced Levergunner
- Posts: 6682
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Casting - lube question
Some of the harder lubes don't come off the bullet and any recovered to inspect show a lot of lube left in the grooves. I like a softer lube that is firm enough to reach the muzzle, but pretty much all used up by the end of the bore. I look for a good lube star on the crown to tell me if the bullet still had some lube left when it exited. But don't want to see much lube left on recovered bullets.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
-
- Levergunner
- Posts: 11
- Joined: Sat Oct 10, 2015 9:42 am
- Location: Alaska
Re: Casting - lube question
Been using Ben's Red (Red n tacky grease, bees wax, atf, stp +... and another ho made concoction since I started casting 10 years ago. No complaints. Recipes on cast boolits.