WTB in MO 308 WIn LEE FCD

[TedH]

I have found the die I was after. Thanks.

[Blaine]

I guess everything is crazy in the shooting world. Can't seem to find an in stock LEE Factory Crimp Die for 308 Winchester. If you have one laying around you can part with, shoot me a price.

This is unusual....here's a .375 Win FCD for 12 bucks...if you get that maybe you could swap with somebody??

https://www.amazon.com/dp/B00162RUWC/re ... s9dHJ1ZQ==

[TedH]

Actually the 375 FCD is apparently much easier to find right now that the 308. There is not a single retail seller that has a 308 fcd in stock. There's a couple selling on fleabay for 7 or 8 times the retail price. I won't buy into the frenzy.

[ollogger]

TedH A dealer bud of mine owes me some primers, i know he has had LFCD as i have bought
a few from him, he is not the cheapest but he always has most things, will give him a call tue. & let you know


Brad

[TedH]

Thanks Brad, I appreciate it!

[ollogger]

TedH he didn't have one in 308 but has a 30-06, dont know if thats to long? i know a 300 wm is to long


going up to his place on wed.



Brad

[TedH]

Yeah I don't think an 06 will work. Thanks for checking.

[AJMD429]

It wouldn’t be ideal, but there might be another 30 caliber one that could be made to work if you put a spacer under it to lengthen it. In other words I think you could potentially use a 308 die to crimp a 30-06 case if you had something around the base of the case so the shell holder could push up the collet if it was the precise necessary length. The only way to go the other way would be to get the longer die and mill off the lower quarter inch or whatever.