45 Colt Ruger loads?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
wvfarrier
Senior Levergunner
Posts: 1452
Joined: Mon Oct 28, 2013 9:27 am
Location: West (by GOD) Virginia

45 Colt Ruger loads?

Post by wvfarrier »

I read Paco's article on "full house" 45 colt loadings for rifles. Are those comparable to the Ruger/TC loads or more powerful? I noticed most of the Ruger/TC loads are in the 28,000# pressure range.
A bondservant of our Lord, Christ Jesus
3leggedturtle
Advanced Levergunner
Posts: 4145
Joined: Fri Dec 21, 2007 11:34 am
Location: north of Palacios about 1400 miles

Re: 45 Colt Ruger loads?

Post by 3leggedturtle »

Paco's loads are above Ruger loads. I shot a few in a Puma 16" 45 Colt that weighed 5lbs. Steel butt plate was not enjoyable. Put a recoil pad on and were ok to shoot about 30 or so rounds off the bench. If you have the black plastic checkered grip they will feel a cheese grater after a few.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres

250 Savage... its what the 223 wishes it could be...!
User avatar
wvfarrier
Senior Levergunner
Posts: 1452
Joined: Mon Oct 28, 2013 9:27 am
Location: West (by GOD) Virginia

Re: 45 Colt Ruger loads?

Post by wvfarrier »

Ok, thats kinda what I figured.
A bondservant of our Lord, Christ Jesus
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 3920
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: 45 Colt Ruger loads?

Post by Scott Tschirhart »

When Paco wrote about those loads, I think he was also shooting a Freedom Arms .454 Casull which would of course take those loads in stride.
User avatar
JimT
Shootist
Posts: 5526
Joined: Thu Sep 06, 2007 5:04 pm

Re: 45 Colt Ruger loads?

Post by JimT »

Scott Tschirhart wrote: Fri Jan 28, 2022 12:23 pm When Paco wrote about those loads, I think he was also shooting a Freedom Arms .454 Casull which would of course take those loads in stride.
Scott .. he also had a 7 1/2" Ruger Blackhawk in .45 Colt that pre-dated his 454. He used it as well as his FA when we were shooting and hunting together in the 1980's. I was content with 300 gr. bullets at a bit over 1100 fps in my Blackhawk .45 Colt but we both pushed the 454 close to its limits.
User avatar
Old Savage
Posting leader...
Posts: 16714
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: 45 Colt Ruger loads?

Post by Old Savage »

Tutt gave me some 360 gr loads that do about 1100 from a pistol and 1350 from my Rossi 20” 92.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
User avatar
JimT
Shootist
Posts: 5526
Joined: Thu Sep 06, 2007 5:04 pm

Re: 45 Colt Ruger loads?

Post by JimT »

Old Savage wrote: Fri Jan 28, 2022 1:26 pm Tutt gave me some 360 gr loads that do about 1100 from a pistol and 1350 from my Rossi 20” 92.
Those would be Thumpers!
User avatar
Old Savage
Posting leader...
Posts: 16714
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: 45 Colt Ruger loads?

Post by Old Savage »

Certainly not something you would shoot a lot of but manageable for some needed purpose would be my outlook. Accuracy was good in the rifle.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 3920
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: 45 Colt Ruger loads?

Post by Scott Tschirhart »

JimT wrote: Fri Jan 28, 2022 12:41 pm Scott .. he also had a 7 1/2" Ruger Blackhawk in .45 Colt that pre-dated his 454. He used it as well as his FA when we were shooting and hunting together in the 1980's. I was content with 300 gr. bullets at a bit over 1100 fps in my Blackhawk .45 Colt but we both pushed the 454 close to its limits.
Yes, I remember reading about your experiments. My hands hurt to even think about it!
User avatar
wvfarrier
Senior Levergunner
Posts: 1452
Joined: Mon Oct 28, 2013 9:27 am
Location: West (by GOD) Virginia

Re: 45 Colt Ruger loads?

Post by wvfarrier »

That sounds painful
A bondservant of our Lord, Christ Jesus
piller
Posting leader...
Posts: 15207
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: 45 Colt Ruger loads?

Post by piller »

I have loaded some 300 grain bullets for my Blackhawk up to 1050 fps. They are accurate. Not fun to practice with, but accurate as I can possibly shoot. For practice, I switch cylinders and use .45 ACP that comes out around 850 fps with 230 grain hardball loads. I have been having some issues in my right hand, so I have switched to shooting handguns Left handed. Accuracy is the same or a little better. Issues are related to TIAs instead of damage from shooting.
I have some 325 grain flat nose lead .452 bullets. I run them about 850 to 900 fps. Great accuracy. Kick is a good firm push. I do not want to find out what the receiving end feels like.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
BigSky56
Advanced Levergunner
Posts: 2356
Joined: Mon Sep 03, 2007 6:49 pm
Location: NW Montana

Re: 45 Colt Ruger loads?

Post by BigSky56 »

In my ruger I run a 255 rnfp pushed by 19.5grs of AA 5744 I get 1000 fps + and it generates 14k psi, the data is from the AA manual. If you need more bang you can load up to 28grs for 1400 fps and 30k psi. danny
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3714
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: 45 Colt Ruger loads?

Post by CowboyTutt »

JimT wrote: Fri Jan 28, 2022 1:38 pm
Old Savage wrote: Fri Jan 28, 2022 1:26 pm Tutt gave me some 360 gr loads that do about 1100 from a pistol and 1350 from my Rossi 20” 92.
Those would be Thumpers!
Yes Jim, in a 5 1/2 inch Ruger, they kicked pretty darn hard. Old Savage could shoot it better than me back then. Funny thing, it was only a starting load out of the Hodgdon manual and as of last year (2021), its still listed. Hoping to get my game back with it some day soon, just need to adjust some meds I hope. Have better glasses now already.
Regards,
-Tutt

Actually, they were more like 1150 fps. Still have the data I believe.
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
User avatar
wvfarrier
Senior Levergunner
Posts: 1452
Joined: Mon Oct 28, 2013 9:27 am
Location: West (by GOD) Virginia

Re: 45 Colt Ruger loads?

Post by wvfarrier »

I did a bunch of testing this week. I settled on 19 grains of Lil Gun (Ruger, T/C) load, seated at 1.575". The max load is 21 grains seated at 1.65" but I didnt care for the recoil on those. I can shoot these all day long out of my 24" Winchester Deluxe. The are exactly 1" at 50 yards, using the 300 grain xtp. I havent chrono'd these as its been raining ice and snowing almost all week but they are definitely a "step up" from factory loads. No pressure signs at all, not on the brass or during extraction.
A bondservant of our Lord, Christ Jesus
piller
Posting leader...
Posts: 15207
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: 45 Colt Ruger loads?

Post by piller »

We have had some ice and snow here. Getting out to do anything other than necessary chores is not fun.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Post Reply