browning model 71 mag tube

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Montana22
Levergunner
Posts: 40
Joined: Fri Jul 09, 2021 11:58 am

browning model 71 mag tube

Post by Montana22 »

Getting ready to pull a browning model 71 mag tube out of my rifle and am wondering if it is a press/push fit or is it threaded into the receiver?
thanks
montana22
Top
User avatar
vancelw
Advanced Levergunner
Posts: 3928
Joined: Mon Sep 28, 2009 1:56 pm
Location: 90% NE Texas and 10% SE Montana

Re: browning model 71 mag tube

Post by vancelw »

Been a long time since I had one of mine apart, but I believe it is threaded. A punch in the magazine cap retaining screw hole will turn it. Use Kroil if it's gunky.
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
Top
Montana22
Levergunner
Posts: 40
Joined: Fri Jul 09, 2021 11:58 am

Re: browning model 71 mag tube

Post by Montana22 »

Thanks vancelw
Top
Post Reply

Return to “General Discussion”