Uses for IMR 4759?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
homefront
Levergunner 3.0
Posts: 771
Joined: Tue Dec 18, 2007 10:01 pm
Location: Perkiomenville, Pa

Uses for IMR 4759?

Post by homefront »

In digging through my powders I found a can of IMR 4759. I can't find any recipes for what I shoot (.38/.357, .41 mag, .44 mag, .30-30 and .38-55). When I bought it, I was probably looking for 4756 and grabbed this by mistake. I've heard that 4759 was supposed to be a black powder substitute, but can't find any loading data.
Anyone use this?
Charles
Advanced Levergunner
Posts: 2004
Joined: Sat Dec 15, 2007 2:29 pm
Location: Deep South Texas

Re: Uses for IMR 4759?

Post by Charles »

IMR 4759 was developed for military use in 30-06 'Frangible" ammunition. It is a fast burning powder with lots of bulk. It could be used in lower pressure loads without giving ignition problems like other faster powders could.

4759 has been the "go to" powder for cast bullet rifle loads for several generations and does excellent work at that task. It can also be used with jacketed bullets for reduced velocity loads.

It also does well in the larger sixguns rounds. It will not produce top velocity, but will deliver excellent accuracy. Paco has work with this powder in sixgun rounds and there is some data around somewhere.

Whoever told you 4759 was a black powder substitute was in grievous and serious error. It can be used in many of the older rounds with cast bullets, but it is not a substitute.
homefront
Levergunner 3.0
Posts: 771
Joined: Tue Dec 18, 2007 10:01 pm
Location: Perkiomenville, Pa

Re: Uses for IMR 4759?

Post by homefront »

Thank you, this is a great start.

Can anyone point me to some load data?
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Uses for IMR 4759?

Post by Rusty »

Do a Google search on "IMR 4759" and click away. there are several pages of references.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
w30wcf
Senior Levergunner
Posts: 1358
Joined: Mon Apr 23, 2007 11:23 pm
Location: Erie, PA

Re: Uses for IMR 4759?

Post by w30wcf »

homefront,
4759 is very similar in burning rate to 4227. In the cartridges you mentioned, I have used 4759 in the .357 and .30-30.
11-12 grs in the .357 with a 158 gr. bullet is a capacity load and does 1,400 f.p.s. in my marlin with excellent accuracy.
14 grs. in the .30-30 under a 170-180 gr; cast bullet is a fine mid range load (1,500 f.p.s.) :mrgreen:

w30wcf
aka John Kort
aka Jack Christian SASS 11993 "I can do all things through Christ who strengthens me." Philippians 4:13
aka w44wcf (black powder)
NRA Life member
.22 WCF, .30 WCF, .44 WCF Cartridge Historian
L8agin
Levergunner 2.0
Posts: 144
Joined: Mon Jul 21, 2008 9:46 pm

Re: Uses for IMR 4759?

Post by L8agin »

It's a great powder in 30-30 with cast bullets. Lots a data in the Lyman cast bullet handbook. Used for reduced loads in many rifle calibers.
L8
User avatar
Old Savage
Posting leader...
Posts: 16686
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Uses for IMR 4759?

Post by Old Savage »

Very accurate in one of my 30-06s with 216 gr cast bullets, 311284. 21 grs. yeilds about 1600 fps. I got the load out of the NRA cast bullet manual. There is an interesting story in there about a guy's grandad and his old 03 and bets on covering his groups with a quarter at 100 yds. In my rifle 3 x.65", 5x .82" and 10 in 1 1/4" at 100 yds. And that was in the first outing 20 rounds total.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
User avatar
AJMD429
Posting leader...
Posts: 31932
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Uses for IMR 4759?

Post by AJMD429 »

It is also used in Savage's ML-10 muzzleloader - 43 grains propels a 300 grain bullet at 2225 fps. (Some 'duplex' loads listed elsewhere are claiming 2500fps+ with the 300 grainers! :shock: )

http://www.sav10ml.com/pages/load_data/table1.htm

Thump!
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
homefront
Levergunner 3.0
Posts: 771
Joined: Tue Dec 18, 2007 10:01 pm
Location: Perkiomenville, Pa

Re: Uses for IMR 4759?

Post by homefront »

Looks like I need a copy of the Lyman Cast Bullet Handbook.

Thanks for the replies. :D
User avatar
Borregos
Advanced Levergunner
Posts: 4756
Joined: Thu Sep 13, 2007 7:40 am
Location: Ontario, Canada

Re: Uses for IMR 4759?

Post by Borregos »

I only use 4759 in my 7mm BR remington XP 100
20 grains of it behind a 150 grain Hornady is deadly accurate!!
Pete
Sometimes I wonder if it is worthwhile gnawing through the leather straps to get up in the morning..................
User avatar
Cimarron Red
Levergunner 2.0
Posts: 480
Joined: Mon Sep 03, 2007 5:18 pm
Location: Colorado

Re: Uses for IMR 4759?

Post by Cimarron Red »

4759 is my powder of choice in the .45-70 under a 325 grain and 405 grain bullet. My cowboy lever action silhouette load is 25 grains with the 325 for velocities just a bit higher than BP. Great powder!
User avatar
KirkD
Desktop Artiste
Posts: 4406
Joined: Sat Apr 07, 2007 6:52 am
Location: Central Ontario, Canada
Contact:

Re: Uses for IMR 4759?

Post by KirkD »

I found that SR4759 was a very good powder for cast bullets in my 38-55. 19 grains under a 255 grain bullet gave me 1,581 fps, which I consider to be a bit on the steamy side. I took a look in my file to see if I had any targets with that load and found one 3-shot group at 100 yards that was 2 & 3/16" and one 5-shot group at 200 yards that was 2 & 1/2" wide x 6 & 1/4" tall (my front sight is so thin, it's hard to see the top edge of it). If you use this for your 38-55, I might recommend starting at 18 grains.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
homefront
Levergunner 3.0
Posts: 771
Joined: Tue Dec 18, 2007 10:01 pm
Location: Perkiomenville, Pa

Re: Uses for IMR 4759?

Post by homefront »

Kirk, thanks. That is very useful to me.

Are you using a gas check on that bullet?
User avatar
6pt-sika
Advanced Levergunner
Posts: 9466
Joined: Wed Dec 19, 2007 7:15 pm
Location: Virginia

Re: Uses for IMR 4759?

Post by 6pt-sika »

SR4759 used to be my number one cast bullet powder in the 30-30 , 38-55 and 45-70 !

And there's nothing wrong with it now ! I just like XMP5744 a little better !
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
User avatar
KirkD
Desktop Artiste
Posts: 4406
Joined: Sat Apr 07, 2007 6:52 am
Location: Central Ontario, Canada
Contact:

Re: Uses for IMR 4759?

Post by KirkD »

homefront wrote:Kirk, thanks. That is very useful to me.

Are you using a gas check on that bullet?
No. I try to stay away from the added expense of gas checks except on my 25-20 and 30-30 where I can't live without them.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
Bluehawk
Levergunner 2.0
Posts: 197
Joined: Mon Jan 28, 2008 2:15 pm
Location: South East PA

Re: Uses for IMR 4759?

Post by Bluehawk »

There have been a few articles written stating that 4759 has a Peak pressure ratio ( or burning rate ) very SIMILAR to Black Powder and is touted a a very good powder for those who need to BUMP up bullets , where this is usually done with Black Powder . This might be the confusion as a BP subsitute IT IS NOT
Works very well with cast bullets due to this buring rate and how fast peak pressures rise
The right way is always the hardest. It's like the law of nature , water always takes the path of least resistence...... That's why we get crooked rivers and crooked men . TR Theodore the Great
homefront
Levergunner 3.0
Posts: 771
Joined: Tue Dec 18, 2007 10:01 pm
Location: Perkiomenville, Pa

Re: Uses for IMR 4759?

Post by homefront »

It's sounding like this is the perfect cast powder to try in my .38-55 with commercial hard-cast bullets.
I have a .381 bore, and Roger's Better Bullets has a 255 gr. sized at .379. These are not at all accurate in my gun unless I use a faster powder like 4227. I also have an untried Rapine mold that casts at .380.
I'll try the 4759 as well as 2400 and Unique and see what happens. :D
homefront
Levergunner 3.0
Posts: 771
Joined: Tue Dec 18, 2007 10:01 pm
Location: Perkiomenville, Pa

Re: Uses for IMR 4759?

Post by homefront »

It's sounding like this is the perfect cast powder to try in my .38-55 with commercial hard-cast bullets.
I have a .381 bore, and Roger's Better Bullets has a 255 gr. sized at .379. These are not at all accurate in my gun unless I use a faster powder like 4227. I also have an untried Rapine mold that casts at .380.
I'll try the 4759 as well as 2400 and Unique and see what happens. :D
User avatar
AJMD429
Posting leader...
Posts: 31932
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Uses for IMR 4759?

Post by AJMD429 »

Bluehawk wrote:There have been a few articles written stating that 4759 has a Peak pressure ratio ( or burning rate ) very SIMILAR to Black Powder and is touted a a very good powder for those who need to BUMP up bullets , where this is usually done with Black Powder . This might be the confusion as a BP subsitute IT IS NOT
Works very well with cast bullets due to this buring rate and how fast peak pressures rise
Yep - the Savage ML10 instructions are full of warnings that although you can us it in THEIR gun, such loads are not intended for any other guns. (Of course some portion of their eagerness could be to make their guns sound even more unique vs. other competitors...)
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
scr83jp
Levergunner 2.0
Posts: 226
Joined: Thu Mar 27, 2008 3:06 pm
Location: S. Calif

Re: Uses for IMR 4759?

Post by scr83jp »

homefront wrote:In digging through my powders I found a can of IMR 4759. I can't find any recipes for what I shoot (.38/.357, .41 mag, .44 mag, .30-30 and .38-55). When I bought it, I was probably looking for 4756 and grabbed this by mistake. I've heard that 4759 was supposed to be a black powder substitute, but can't find any loading data.
Anyone use this?
I started using Smokeless Rifle 4759 in the early 1970's for cast bullets in my Remington Rolling Block 45-70 Schuetzen Rifle. I was told by Jess Smiley owner of Javelina Alox Bullet lube & a retired WW2 army colonel that it was a substitute for black powder.I used 20gr behind a cast 405gr lead bullet for the schuetzen matches.There is load data on line & in manuals for SR 4759.
ole pizen slinger
Levergunner 2.0
Posts: 403
Joined: Mon Dec 17, 2007 5:16 pm
Location: North Carolina

Re: Uses for IMR 4759?

Post by ole pizen slinger »

I think where the confusion with 4759 and Black Powder comes from is its use in duplexing BP loads. Some have used small amounts of 4759 directly over the primer with the rest of the charge being Black Powder in order to up the pressure of the load and thus get around the fouling issue with BP in large cartridges. There is ample information on the various BP forums about duplexing should you be interested.
ole pizen slinger
He is no fool who gives what he cannot keep to gain what he cannot lose.
User avatar
Bucks Owin
Levergunner
Posts: 21
Joined: Mon Aug 31, 2009 12:52 pm
Location: Shasta county, Kalifornia

Re: Uses for IMR 4759?

Post by Bucks Owin »

Great powder in .44 mag too. This life sized varmit was tagged at 150 yds with 4759 behind RCBS 225GC...Hogleg is old 10" Ruger .44 Flattop.

Image
User avatar
Bucks Owin
Levergunner
Posts: 21
Joined: Mon Aug 31, 2009 12:52 pm
Location: Shasta county, Kalifornia

Re: Uses for IMR 4759?

Post by Bucks Owin »

Sadly, SR4759 is being discontinued... :cry:
User avatar
Malamute
Member Emeritus
Posts: 3766
Joined: Tue Apr 03, 2007 8:56 am
Location: Rocky Mts

Re: Uses for IMR 4759?

Post by Malamute »

We may be having issues with semantics. "Substitute" isn't exactly the same as being able to "duplicate" black powder loads, which I believe is an accurate statement. 4759 has long been explained as a good powder to duplicate black powder loads with smokeless, but it isn't a substitute, like Pyrodex and other similar powders.

I've used 4759 to load reduced jacketed loads in a couple rifle calibers. The 200 gr Hornady 33 Win flat point @ about 1500 fps in the 338 Winchester Mag shoots tiny groups at moderate range, and is very pleasant to shoot. I loaded them as grouse and small game loads. Wish I had more of the 33 bullets now, I'd shoot the gun more often.

Not only is the Lyman cast bullet manual good, their regular manual has both jacketed and cast data, just not as many bullets and loads for cast as the manual dedicated to cast. I have both and like them both.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-

Isnt it amazing how many people post without reading the thread?
Centennial
Levergunner 2.0
Posts: 369
Joined: Wed Mar 12, 2014 6:41 pm

Re: Uses for IMR 4759?

Post by Centennial »

Hodgdon discontinued importing it , despite all our protests, they went with "their stockholders".
It's made in Canada by Rockwell (?)
User avatar
AJMD429
Posting leader...
Posts: 31932
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Uses for IMR 4759?

Post by AJMD429 »

homefront wrote:Thank you, this is a great start. Can anyone point me to some load data?
Ammoguide uses for SR-4759.jpg
As you can see, AmmoGuide.com has a fair amount of data for that powder. Of course there is the factory website, as well. LoadData.com is also a good source. You have to pay membership fees for either of those websites, but a year's worth is still less than half to a third of what you'd otherwise pay for a paper reloading manual. (The paper manuals ARE useful for tips and techniques, but not needed for actual load data.)
You do not have the required permissions to view the files attached to this post.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
User avatar
Bucks Owin
Levergunner
Posts: 21
Joined: Mon Aug 31, 2009 12:52 pm
Location: Shasta county, Kalifornia

Re: Uses for IMR 4759?

Post by Bucks Owin »

Centennial wrote:Hodgdon discontinued importing it , despite all our protests, they went with "their stockholders".
It's made in Canada by Rockwell (?)
Apparently the machinery is worn and whatever powers that be in charge don't wanna spring for an overhaul....

Besides 4759, PB and a couple other powders are also going bye bye...dammit
Post Reply