Paco Kelly's Leverguns.com

GunnyMack

Certainly some experimentation is in order before a new barrel is turned on.

GunnyMack

That's the problem with coders, they aren't using their work for its intended purpose.
I tried it again in a different browser and it still sucks.
Hopefully they will get enough complaints and fix it.

GunnyMack

One of my classmates developed a nipple with a check valve( he didn't pursue it to patent/sell) to prevent blow back and it worked very well. He used a Mauser 98 with a .50 smooth bore for testing. It easily burned hundreds of grains of black with multiple balls and no gas leaving the nipple end. It...

GunnyMack

I remember hearing about slaughter houses using 25-20 and 32-20 before they swapped to the bolt guns.
I shot a few deer with 25-20 and they didn't know the difference.

GunnyMack

This company is out of Vermont I believe. They have a few mills they work with. It is all EWP - Eastern White Pine. The 6x6 posts were still on the stump and blowing in the wind a month ago... hope they don't twist too bad !

GunnyMack

Looks like a FAJEN stock too?!

We literally had 55 gallon drums full of Mauser K98s, P14s at school the students could buy as donors actions.

Those Oldies are still goodies!

GunnyMack

Sorry to hear Jim.
Day before Thanksgiving one of my hunting buddies from the club passed away. I was just at his place helping his widow get a handle on his hunting and fishing stuff. They had just moved a couple months ago but everything was fairly well organized, still not easy to deal with.

GunnyMack

Sorry to hear Jim.
Day before Thanksgiving one of my hunting buddies from the club passed away. I was just at his place helping his widow get a handle on his hunting and fishing stuff. They had just moved a couple months ago but everything was fairly well organized, still not easy to deal with.

GunnyMack

Yes Bill, try swinging your hammer upside down to drive them in!

GunnyMack

I remember Lincoln Logs were much easier to assemble

GunnyMack

These buildings are very time consuming, the siding is vertical so the 'girts' are all precut, color coded so ya just start installing along the plate and nail them in. We have burned through 40 lbs of 12d's already! The roof sheathing is all 1x6, thankfully we can use the nail guns on that! It's a ...

GunnyMack

My dinosaur of an iPad doesn't play well with the new site.

GunnyMack

Their site was always problematic, most times it wouldn't show me data after making selections. I had to use a completely different search engine. I bought one of their reloading manuals, was not too pleased to see it lacking cartridges I load for. They also said. ' shotshell data included ' but onl...

GunnyMack

Good deal ! It never hurts to ask to help.
I'm lucky enough that I have private property I can shoot on, a buddies farm where we can get almost 300 yards and the hunt club im in we can get almost 400. I have to cut a few small trees to do it though.

GunnyMack

Maybe talk to the local Forest service office, get the local shooters to volunteer their time to clean up & repair AND watch over the place to help out the ' overworked federal employees'
After all the national forests belong to US the taxpayers!

GunnyMack

Street star, on offense taken. I get it- just seems like they take and take and take some more and the policy holder gets less and less but more hoops to jump through. No, no trampolines or pool! :D Here if you have a pool you are required to have a fence around it with child resistant gate, higher ...

GunnyMack

I have saved the TKO formula on my phone.

The load I settled on for my Henry 41 mag has a TKO of 22.41 !
Now I just gotta take it somewhere I can use it on deer or pigs to see how well it works.

GunnyMack

Hmm, they also do a 10mm conversion!

GunnyMack

I had a Single Six in 32, it got a full box of longs through the cylinder before it went for reassignment surgery and became my 44 special !

GunnyMack

Well next time one of us jerks

posts make darn sure you act!

I dont have a 327, would like to but too many others to work up loads for. Knowing guys here have em I figured I'd send out the alert so you guys could fight for em!

GunnyMack

I get it Jason, just be nice if they would act before they were needed. I guess that's the common sense I'm using again. Guess ya just have to convert to Muslim- insurance is gambling for them. I left LM years ago and after all the STUPID, MORONIC commercials Liberty Mutual has come out with I'd def...

GunnyMack

Didn't notice that large of an increase. What I have issue with is I have large , LARGE oak trees very close to my house. I asked the insurance agent if they would pay to take down/ trim the trees. No we don't do that. Ok so the next hurricane Sandy snaps off the top and goes through the roof causin...

GunnyMack

Well John, that just about sums up Sage! She is into EVERYTHING! there is no doing anything without her help!

GunnyMack

Good read and very good information.
In school we had a class on reloading, the instructor always used 'and the angles sing ' as his motto when unsafe practices showed up.
I dont hotrod loads, I've found most often best accuracy is found on the lower scale for a given powder.

GunnyMack

You guys got my 38-55 intrest piqued, found a light weight sharps and a #3 for sale... Sadly my gun fund is empty thanks to the bumbling stumbling jackazz in the Whitehouse

GunnyMack

Was it the Captain or Mr Rodgers ( or both ) that was decorated in one of the wars?

Yup my joints hurt in the morning and at noon and getting into bed! Copper compression knee sleeves are great !!

GunnyMack

I believe Scott T was looking for 327 brass, i just got an Email from Midsouth Shooters Supply, they have Starline 327 brass in stock- get it while it lasts!

GunnyMack

Fingers crossed, glad to help!

GunnyMack

I'm not but I like that one you have on your Nova- how is it mounted?

GunnyMack

I didn't know they were still making that Pinker bullet. Used to load them in my '06 years ago just for plinking. It was the 110gr jhp that I'd hot rod for groundhogs, wreck a whistle pig in the blink of an eye! Then I tried them on prarie dogs and all that was left was pink mist! Bet Jess was happy...

GunnyMack

Looking at your picture, it appears the divot is machined into the frame BUT it is distorted and bigger with the new damage from the broken pawl.
I almost think you should contact Ruger and say you want a new frame to replace your damaged one. Who know this might be a first of this failure for them.

GunnyMack

Guns International has a Mossberg 454 listed for 795.00- just saying...

GunnyMack

Dog is after all mans best friend, that being said if I lived there each time I was at the pub I'd buy that dog a plate of bangers & mash! When I lived in Colorado there was a place called The Dog Bar. Kind of an open air joint and I remember a Great Dane, a few mutts and other dogs that had fre...

GunnyMack

Ok, top right of home page you'll see a '?', outline of a human torso, envelope, bell Click on the torso- opens the User Control Panel. Open Board Preferences, low left you'll see a blue bar with Edit xyz And click on Edit Notifications You can then check which you want notifications for. Here's a p...

GunnyMack

If I remember correctly, there is a button you can click on/off to alert of a NEW POST.
I'd have to search around and try to find it to explain how to get you there.

GunnyMack

Ok that explains that, didn't know Ruger changed the NEW NM operation.

GunnyMack

Yes sir- you forget how hard it is until you go back and do it again. Everyone thinks the trades aren't worth doing until they realize WE keep the heat on, toilets flushing, lights on and a roof over their heads. Moving beams Monday morning I grabbed the end of an 8x8/12' and lifted to feel a slight...

GunnyMack

How very true!! Thankfully those days are behind me now

!

GunnyMack

Thanks Bill, building is also the reason we need doctors- us guys are broken down, beat & wore out joints !

GunnyMack

Some will enjoy this This week we started a post and beam barn, 36 x 60' It consists of 5 Bents at 12' centers. Posts are 8x8, 6x6, 4x7. We were getting 2 bents set per day as well as all the tie beams. This is a kit, the company's claim is if you have to cut parts something is wrong. And there is L...

GunnyMack

Rectum- heck kilt em both !

GunnyMack

Poaching is one thing when you are starving but this guy should be tossed in the clink!

GunnyMack

Good grief! I'm surprised you can't see/feel that on the underside of the grip frame!

GunnyMack

Ya can't beat that! Dillon is the best at customer service hands down. If only other companies would take a page from Dillon's play book the world would be a better place.

GunnyMack

That Barnes looks very nice, reasonably large SP.
Did you look at Hawk bullets?

GunnyMack

I've never had the opportunity to see a Sharps with my fingers' so I'm no help but it sounds like you got it figured out!
I'm curious how your range trip turns out!

GunnyMack

Never knew this, thanks Jim!

GunnyMack

I've no problems with Islam, I have a couple good friends who are devout and they don't have a mean bone in their bodies.
However, these animals need to be scoured from the face of the earth!
My hat is off to those tank commanders!

GunnyMack

For 60 bucks ya couldn't say no !

GunnyMack

That's why my Single Six 44 special only get cast bullets and light charges!

That's quite a looker Jim!
My 4&5/8" BH 41 is a handful, when I found the brass grip frame the light bulb went on as I realized that added weight would help with recoil. Really need to get that out more!

Search found 9416 matches