Paco Kelly's Leverguns.com

stinkycat

Great eastern cutlery, Titusville Pa. Best traditional pocket knives made today!

stinkycat

.410 ?

stinkycat

the loading spring screw needs tightened the small screw to the rear of the port, do not over tighten it will break

stinkycat

Marlin 39a

stinkycat

To give some idea of the size of this thing this is 3 rounds of 30-30 in a 950 jdj

stinkycat

this one is oval shape like a flask, has a very small cap that is centered. on the bottom of the paper label is a 5 digit no. then de 29 de july 1924

stinkycat

Would love to have a set of stag grips like that for mine, but they would cost more than the gun did!

stinkycat

O.S.O.K. I carry it in an El Paso street combat 88 I agree with you, good guns get good holsters!

stinkycat

Have been wanting something bigger than a 22 but not as loud or heavy as my 357's. This was a heavy barrel gun, swapped barrels, took endshake out of the cylinder trued the barrel, set b/c gap at 3 thousands. Grip are made from g-10 micarta, target hammer, ran it through the glass beads and parkeriz...

stinkycat

have had a carry permit here in WV for almost 23 years, this ols security six has been my carry piece for the past 11. On my belt or no more than arms length away 24/7/365 its very important to me!

stinkycat

http://i48.photobucket.com/albums/f228/bigstinkycat/hunting2011041.jpg they are not strong enough for modern rounds. did this one several years ago for my brother, green mountain 54 cal barrel cut the breach plug to take a 209 shotshell primer, makes a really neat muzzle loader. he's taken a bunch ...

stinkycat

Have a good friend on the zanesville pd he's with their srt and is a sniper today I bet he's a big game hunter!

stinkycat

in the movie to hell and back, about
In the movie to hell and back, about Audie Murphy, one guy in his outfit, think they called kovack or something always had his stove. wonder if it was one of these? best I remember it was silver colered and tube shaped.

stinkycat

It's the 39a I just finished, greenmountain octagon barrel english walnut stocks. I figure thats minute of squirrel.

stinkycat

finally got the new rifle to the range. zeroed right in couple 3 shot groups around 1/4 inch. finished up 20 quick rounds feeds and functions fine.

stinkycat

That is nice! And when the storm hits and the power goes out!

stinkycat

40 gauge stainless, takes 3 good men and a boy to move it, burns wood. should last a lifetime.

stinkycat

In action, bad picture but to the left is my stainless free standing fireplace, to the right a brown 275 coleman friday nights some friends stop by we have a few beers and tell hunting lies.

stinkycat

put a foolproof and fiber optic front on need to get to the range and see how it shoots

stinkycat

Another of my strange collections. I just like things made to last, mine are from 1947 to 1996.

stinkycat

Done. Still needs sights, but the truck needs a radiator. below is the young lady who's name is on the barrel, Amelia Mae, someday this will be her rifle.

stinkycat

Stocks inletted, shaped, and sanded. started to put finish on, now to polish and blue the ]metal. will have Brian powley, powley engravers.com will put barrel markings on for me.

stinkycat

Just got started on a rifle for this fall. 1947 39a, green mountain octagon barrel, english walnut. still have to get sights, foolproof or lyman 66. have 5 months till hunting season barring any problems should be done in plenty of time. http://i48.photobucket.com/albums/f228/bigstinkycat/hunting201...

stinkycat

Has anyone blued a 9422? I'm wondering about the reciever, sure looks like the finish on the post 64 94s. will it take a proper blue or will I have to finish it with something else? When doing a post 64 94 I parkerize the receiver blue the rest.

stinkycat

Heads up ! Just got a call from a shop nearby, had gotten in a new 336 marlin after a long search. Customer was going to use for opening day next monday. Opened the box grabbed the buttstock and pulled it right off the gun, no tang bolt! I had a extra so he's good to go but really disapointed to hea...

stinkycat

I just picked up a 92 in 25-20 I've had several others 94 marlins and a 23 savage used a 60 grain hornady over 5 grains of universal clays for about 1600, did'nt tear them up any more than a minimag hollow point in long rifle. You might want to check your game laws, legal here in WV I don't believe ...

stinkycat

Did a transfer for a friend today, 86 winchester takedown 45-70 one of Turnbull's reworked guns, tang saftey removed, case colored, reblued. Fantastic work!

stinkycat

1906 the bore shines, 30 some lookers and not 1 nasty comment about the fibre optic front sight! you guys are slipping.

stinkycat

picked this last week, 25-20 exellant bore, and squirrel season starts 1 week from this saturday. had planned on using a 39a but this will go instead.

stinkycat

Don't fell bad I went out one morning this week, perfect day overcast not a trace of wind set up and yep left the ammo box at home!

stinkycat

Pennsylvania gunsmithing school 1991. Wish I had gone right after high school instead of waiting till my back was destroyed. Live and learn!

stinkycat

Sunshine of the night! Have several, this is my favorite stamped 6-54 the year I was born. And its in much better shape than me!

stinkycat

After 30 years of looking finally found a 99 Savage in 250-300, made in 1949. Have seen a lot in 300 308 243 etc. never a clean one in 250. Must get dies, brass bullets try to get it going for deer season.

stinkycat

Made this one up a couple years ago, barrel is cut down from a browning hiwall in 300 short mag.

stinkycat

Miss Rilee, Queen of the house!

stinkycat

My daughter bought this for me at an estate auction last year. She was proud of herself she outbid two old guys! Told me I hope you like it I had to pay 300 for it. I told her she did just fine.

stinkycat

My cut down 94, zeroed with my 150gr sierra hunting load it will shoot to point of aim to 25yds with a 76gr round ball load. Big game, small game, home defense it will do it all.

stinkycat

Brian powley, at powleyengraving.com I know Brian personaly, his work is fantastic prices good and a great person to deal with!

stinkycat

If I could only have one, this would be it. Stainless blackhawk 357, will do anything I need a handgun to do.

stinkycat

Good choice! I have been using their knives for several years, good old fashion American quality. I think you will be very happy with it!

stinkycat

i expect my new/old 32-20 will be spending a lot of time in the woods!

stinkycat

got out today shot 3 different loads at 25 yards staying at 1/2 inch or better. jugled the charge a bit all three shoot pretty much same spot. now will chronograph to see if the fps is what i'm looking for. if this rifle had a foolproof rear and a bead front i'm sure it would do 1 hole groups at 25 ...

stinkycat

thanks sixgun, spring turkey starts in a couple of weeks would love to get one with a 117 year old rifle!

stinkycat

well i loaded up a few rounds with 4.5gr unique lasercast 115gr .313 diameter, will try them monday, never go to the public range on weekends too dangerous! also got some hunters supply 76gr might try to make up a squirrel load.

stinkycat

just picked up a 89 in 32-20, would like some ideas on loads. bore on this rifle is perfect condition, would like to shoot a cast 115 grain at about 1200.

stinkycat

Recently bought 2 new guns just for walking in the woods around here since we have so many coyotes anymore. Last year I hit one with a .22 but didn't get him, never again. I've decided a .357 mag is about right. I bought a 92 Rossi 16 inch stainless and a .357 Ruger Blackhawk 4 5/8 stainless. I've b...

stinkycat

These are my working guns. 39A-22, 94 357, 336 30wcf. All parkerized, have fool proof sights with fiber optics in the front. The second picture is my everyday carry gun. Security 6 Ruger with ivory stocks and some light engraving by Powley. http://i48.photobucket.com/albums/f228/bigstinkycat/336025....

stinkycat

Had a 336 marlin in 35 remington brought into the shop today, owner said it jammed last deer season, said it had 3 rounds in the mag tube, lever down action open. One round was sticking out 3/8 inch over the carrier, tried to move it with a wooden dowel, stuck solid! took the mag cap, spring and fol...

stinkycat

A man down the road passed away a while back and his wife is selling some guns. She has an 1895 Winchester 28 inch barrel 30-40 Krag. The gun is in almost new condition. Serial number puts it at 1905. Any ideas on roughly what it would be worth?

stinkycat

Shown this one here before. My idea of the perfect squirrel rifle, after using it all season it is the perfect squirrel rifle! at least for me.

Search found 95 matches