Paco Kelly's Leverguns.com

1894cfan

Ain't got one of those, so I don't need to worry about it!

1894cfan

[/quote] Just had a thought, whenever you go out shopping stop by the cutlery shop and buy a cheap 8 inch chefs knife to take home with you, with receipt of course. That way if some loony starts waiving HIS knife around you have one to waive right back at him, AND if the coppers start questioning yo...

1894cfan

Just had a thought, whenever you go out shopping stop by the cutlery shop and buy a cheap 8 inch chefs knife to take home with you, with receipt of course. That way if some loony starts waiving HIS knife around you have one to waive right back at him, AND if the coppers start questioning you about ...

1894cfan

[/quote] Just had a thought, whenever you go out shopping stop by the cutlery shop and buy a cheap 8 inch chefs knife to take home with you, with receipt of course. That way if some loony starts waiving HIS knife around you have one to waive right back at him, AND if the coppers start questioning yo...

1894cfan

Thanks guys. Looks like 1-9 twist is a bit tight for what I have planned, but OUGHT to work. Just need to put it on paper to REALLY find out. BTW, the lead that I'm making the Lyman 225438 44gr LRN bullets out of is 1-16 alloy, which should be soft enough to mushroom at about 1k fps.

1894cfan

The country is fine it's just full of idiots..... :x [/quote] Just had a thought, whenever you go out shopping stop by the cutlery shop and buy a cheap 8 inch chefs knife to take home with you, with receipt of course. That way if some loony starts waiving HIS knife around you have one to waive righ...

1894cfan

Squirrels with an occasional rabbit thrown in using cci cb's and quiets in my 39a.

1894cfan

Anybody here know what the standard twist rate is for 22LR? Have a Mini14 in .223, and yes it is .223 not 5.56, with 1-9 twist that I was going to run 44.5gr cast lead bullets in SOMETIMES 22LR type velocity for going after squirrels or bunnies. TIA

1894cfan

On the same vein, the knife Co. Spyderco makes really good knives with a variety of locking mechanisms, BUT they also make a line of slip joint knives aimed directly at England that makes it illegal to own anything else! :twisted: Most knives are legal to own in the UK but not for EDC on the street...

1894cfan

On the same vein, the knife Co. Spyderco makes really good knives with a variety of locking mechanisms, BUT they also make a line of slip joint knives aimed directly at England that makes it illegal to own anything else! :twisted: Most knives are legal to own in the UK but not for EDC on the street...

1894cfan

. YK is right - it is similar to the neutered AR-15’s that are ‘California compliant’. I can’t really blame the company for wanting sales to happen for people who live in police-states, but it is still a capitulation. Perhaps if they countered it by putting something legal but offensive on the prod...

1894cfan

On the same vein, the knife Co. Spyderco makes really good knives with a variety of locking mechanisms, BUT they also make a line of slip joint knives aimed directly at England that makes it illegal to own anything else!

1894cfan

From the dawn of time, EVERY living creature has been able to defend itself against anything trying to eat it, what gives "THEM" the right to take that away from us????????????????? If "they" won't let me defend myself, then sod 'em, I'll do it anyway!

1894cfan

Bill in Oregon wrote: ↑Mon May 06, 2024 6:42 am

Weird seeing all the Nazi flags in New York.

https://www.gettyimages.com/detail/...n ... popup=true

Deleted!

1894cfan

WTF????????? Next thing you know they'll ban fingernail clippers with nail files 'cause they can be sharpened into a small knife blade!

1894cfan

My primary is a Bianchi 101-16 for my Glocks from G43 to G21, also comes in size 101-10 for 1911's. Got an Andrews Car Jacker cross draw for the 43 and G19 size that's perfect for wearing in a car in case of, you guessed it, a carjacking! For non-concealment, I go with a Diamond D Guides Choice that...

1894cfan

Hey, they've also got bullets for the 25ACP! I've got a 1917 Colt Vest Pocket and dies, but no bullets! Looks like I'm gonna have to order some!

1894cfan

Alright, who sunk the mayonnaise???????????

1894cfan

Anybody try these in a ACP? Just wondering.

1894cfan

Eh, what ever floats yer boat. Me? I'll pass. I like my Win 94 and Marlin 1894c with ballard riffling just fine!

1894cfan

BTW, IF you shoot any black powder loads in yours, be sure to spray it down with Ballistol afterwards to prevent rusting. Othias over at C&Rsenal swares by it! Been there, done that, got the T shirt!

1894cfan

Pitchy wrote: ↑Sat Apr 27, 2024 7:07 am Watching the news now days is pure aggravation.

THAT is why I don't watch the snooze anymore! They give just the snooze THEY want you to know!

1894cfan

. Yeah. "guilty until proven innocent" became acceptable when some of the churches decided that declining membership could be addressed by letting the government take over defining and enforcing morality ('vice') instead of just crime. In the name of 'the war on drugs' the Constitution wa...

1894cfan

Well, look what David did to Goliath! Then again, he had a MUCH bigger target!

1894cfan

Don't have one of those. But I got a short barrel speed six and a S&W 60. Those ought to take care of any two legged varmints that come around!

1894cfan

4.8 is nothing. I was 60 miles from the epicenter of the 1989 Loma Prieta quake......7.2 We were also in an area where homes were built on alluvial soil. We were rocking and rolling pretty good. :shock: I was closer than that at 40 miles, about half way between where the quake hit and Oakland. Was ...

1894cfan

Weird, I clicked on it twice and got it both times, the last just moments ago.

1894cfan

And I grew up in the Santa Clara Valley in what USED to be known as The Valley of Hearts Delight in the late '50s and early '60s. In the Mid to late '60s most all the farm land was plowed over for housing and business! In other words they "paved paradise and put up a parking lot". :cry: Th...

1894cfan

I'm surprised they didn't try and label it as a suicide!

1894cfan

The sky is falling, the sky is falling. WHATEVER you do, DON'T pull your finger out of the dike!! No, not THAT one, the OTHER one!

1894cfan

Can I unload my guns and magazines before I give them to you?

1894cfan

All I can say is NOBODY better touch my beer and ribeyes!!!

1894cfan

"I ain't got a problem with killin, Boss"! Charley Waite "Open Range"
Another line I like from that movie is..."You may not know this, but there's things that gnaw on a man worse than dieing".

1894cfan

Pardon me for dropping another movie, how about The CowBOYS? Half the kids were actors and the other half had grown up on ranches! Had to spend months learning to ride and act. THEN they had to learn to shoot. AND they had to deal with Bruce Dern!

1894cfan

What was that fairly recent saying? I have to keep coming up with new conspiracy theories 'cause the old ones are turning out to be real!?

1894cfan

Sod 'em!

1894cfan

Great, just great! And I just picked up a 200ct bag of Hornady 357 factory brass! :? :roll: Thanks for the heads up on what I have to deal with. You might check with Hornady, but they may not use all 'short' cases - hopefully just for the 'leverevolution' loadings. Measure them and see, I guess. [/...

1894cfan

My standard go to for 158gr is 13.5gr 2400, both jacketed and cast. Mostly cast these days.

1894cfan

Great, just great! And I just picked up a 200ct bag of Hornady 357 factory brass!

Thanks for the heads up on what I have to deal with.

1894cfan

Scott, replaced the mag, epoxied the mag well, had to replace the mag release cause it got bent, and when I got the upper back from the gunsmith put it all back together and it was GTG. It was lucky I was using a LIGHT load or it would have gone kaboom!

1894cfan

Scott, replaced the mag, epoxied the cracked mag well, oh, also had to replace the mag release cause it got bent, and when I got the upper back from the gunsmith, put everything back together, and it's GTG! I'm just lucky that I was using a LIGHT load, else it would have been a kaboom!

1894cfan

Be VERY careful flying these days! You got woke libtards BUILDING the planes and clot shotted pilots FLYING the planes! You're either flying in a plane that could fall apart at anytime at all, or have a pilot that could DIE at anytime at all! Me? I'd walk before flying commercial!

1894cfan

And I keep FDE mags for the BO and black for the 5.56/223 wylde riffles. Made the mistake ONCE of trying a 300BLK LIGHTLY loaded 22 sabot with a 55gr cast bullet in a 223 wylde rifle, cracked the P80 mag well, blew out the magazine and locked up the action with a stuck case in the chamber. Had to di...

1894cfan

3K mags????????

I guess it's a case of "you can never have enough"!

1894cfan

I fairly recently saw a Donut Operator utube video of some cops come up on a four door pickup in a mall parking lot with some guys doing drugs. One cop, with a 12ga with buckshot, on the passenger side opened the door and told the kinda wasted driver NOT to reach for the gun in his belt! After telli...

1894cfan

Not much you can do about it. Besides, the main reason I use it is to keep the brass from flying everywhere! Other than that I keep the BCG in it. I've named it Casper. I just hope it doesn't get mad at anything!

1894cfan

Yup, if I was in your group I'd have fun playing with them too! Then again, if I couldn't play with them anymore, I'd just shoot a group on the same line that they were just to show them that they were shooting shotgun pattern groups. What was it Breaker Morant said just before the firing squad lit ...

1894cfan

Sweet. I've got a 16" AR with KalyKey since I'm in Kalifornication!

1894cfan

Bill in Oregon wrote: ↑Sat Feb 17, 2024 9:55 am Coffee! I need strong, black coffee!

Make that an IRISH coffee!!!!!!!!!!!

1894cfan

If I have to sign in to view a video, I ALWAYS pass! Imagine having to sign in to watch Dirty Harry or Breaker Morant!

Search found 1311 matches