Paco Kelly's Leverguns.com

m.wun

I have shot quite a few of them.I don't think I ever shot one that didn't spray!1 and a 1/4 oz. of #6 shot works real good.I saw one hit with an arrow and that was real interesting.

m.wun

Yes they do,I meant canoes,kayaks and float tubes.For the boats I think they have a minimum width.

m.wun

If you are talking about Diamond Valley Lake check the regs for boats as far as kayaks and small boats.They are finicky about what goes in the lake!I think they allow the sit in type kayaks only.The type you sit on top are banned there and at Lake Skinner also.Lake Hemet does'nt allow small craft at...

m.wun

I like the new Leverevolution,good velocity,accuracy and meters even better.

m.wun

When I get this one done in a few weeks I'll see about some photos.I don't go crazy with the bend.A nice 45 degrees and I might try to lengthen and enlarge the knob.I make wafer thin cuts where I want the bend,then remove material on the inside of the bend,next I wrap the bolt in a wet rag.The next ...

m.wun

I found some 174gr steel case mil cheapies for 12$. If I can keep them in a 5" circle at 200 yards with irons I will be happy with that.This is the third mossin I played with.Its going to get a Boyds stock,slick up the bolt,trigger clean up, and I do a nice bent bolt that looks factory to the u...

m.wun

Thank you! I thought I might keep bullets on the heavy side and keep the speed down.
I would like to go upwards of 200gr at around 2300-2500 fps.Maybe even a round nose.

m.wun

Maybe someone here knows what the old Mossin Nagant rifles have for rifling twist
rate?

m.wun

I belong to a private club in Gavalan Hills about 20-25 minutes west of you.Great club but our range is only out to 200yrd.I used to shoot at bee canyon alot not sure if you can still shoot there.When you pass Double check it hooks right up a canyon.The club name is Corona Sportsmans Club.Its not re...

m.wun

I was a mechanic on wind machines in the orange groves in S. Cal.In the spring time after there were no more signs of frost I would go around and (Pickle) the engines for the summertime off.Most of these were propane so the fuel issue wasn't there.I always used a mix of engine oil and gas 50/50.I wo...

m.wun

I have had good results with the LVR powder also.I loaded them at 35gr and get 2250fps
out of my 336 with the same bullet!

m.wun

I lived in Hemet and San Jacinto for 6yrs.If you want to live just outside of town the east end near the citrus groves can be nice.Another area is South of town headed out State st it opens up.Diamond Lake is out there,and the Winchester area towards Sun City and Temecula have some nice(mini ranches...

m.wun

That Cholula is great so is tapatio.I also use (Rooster) or sambal hot sauce for asian
dishes.Other than Tobasco I like one called Cajun Sunshine also.I bet I have 6-8 different
hot sauces in the fridge at one time.I have a thing for green chili right now!

m.wun

The longer barreled gun comes in 1-9" but I like the carbine.I just thought with the 1-12"
twist it may not shoot the 62gr and up very well.More than likley I would load the 50 or 53gr
vmax anyway.Its nice to know that if I picked up some 62gr that it would shoot it well.

m.wun

I have been looking at the CZ 527 carbine in .223.This thing is handy,light,good quality and has iron sights.My only problem with the gun is it has the 1-12" rifling.I would prefer 1-9".I'm not sure if rifling cant be ordered in the preferd.Maybe someone has one or has experience with the ...

m.wun

You could rebarrel it with a 26" medium weight barrel and a quality recoil pad.Use a
lead sled at the range, and you will not notice recoil while hunting...

m.wun

I believe in California the law only requires " any center fire" as legal for deer.

m.wun

Great info,Thanks! I think Ill start a tad light then if I like the bow I can buy new limbs that
are heavier draw.I did see that a arrow rest needs to be used.

m.wun

Anyone have or use one?The reviews have been good.I dont know much about traditional
archery gear.I shot a 60lbs compound, not sure if I could shoot a recurve at 55?It seems
reasonably priced and by a decent company.

m.wun

I lived in Hemet for six years.I now live in Mission Viejo.There is alot more ground out there
for sure.If you need to know a few spots to go (even for deer) PM me...

m.wun

They did that so long ago I couldnt even tell you when it was!It was a great show,with
8 miles of tables.

m.wun

The gun club I belong to had a Christmas party and Turkey shoot this weekend.The Turkey shoot was simple.Use the provided .22 scoped Ruger 10/22 and hit a small lollipop at 50yrd and win a turkey.After hearing from others it was a bit high I aimed at the base of the pop.At the shot I cut the stick.I...

m.wun

The steering wheel is on the wrong side!!!!!!

m.wun

I mean this with respect.Their is alot of old fanny burbs here! Now I know why I like it
here so much.

m.wun

My uncle has one of those shotguns,it belonged to my great grandfather.It has the knurls
on the barrel and has a hump on the back of the action kind of like a Auto-5.

m.wun

Thats a great looking gun.I like the way the scope rail is integral in the action.Its one less weak link that can loosen.My Ruger Hawkeye is sort of that way and I believe the Tikka T3 is also.Now if a scope could have integral rings built into the scope we could eliminate another so called weak link.

m.wun

I just chronoed some loads with 35.3gr of leverevo powder with a 170gr Hornady Interlock
in my marlin 336c, 30-30.They clocked 2250fps at 15'.Very happy with speed and accuracy
and not even near max load.

m.wun

My Grandmother had alot of those machines.She had a shop selling and repairing
sewing machines but mostly delt with Viking machines.I have a 1955 Viking that works
like new.some of these machines are not cheap!

m.wun

Im in Mission Viejo and we saw some sat. morning.Maybe around 3/4" in 30 min.
Had some good lightning here which is kinda rare.

m.wun

Ya! Hook a brother up would ya...

m.wun

How about jumping out that seat switch and not worrying about the glow plugs...

m.wun

Thanks for all the replies! The cartridge is definately on the short list.Maybe some of the
overtime can be put to use!

m.wun

For some reason lately I have had a facination with the 375 HH.Having no real use for one but that never stopped me.Someone here has surely has got some experience with it?I like the fact that its a bigger bore but has the velocity to get out there.A nice bolt gun with a low powered scope and the fa...

m.wun

Being in Ca. the only good thing here is Im less than 1-2 hrs from any of them but I like
the mountains best.

m.wun

It does'nt have to be a spray but I am lazy.I thought of silicone spray,dry lube,or some
other can of something from the garage.I do have some T/C bore butter but something thinner
may be better.

m.wun

Now that I just ran out of case lube(Hornady One Shot spray type) I was wondering if
anyone uses anything non firearms related for lube?I happen to like the spray type because
its easy to apply.

m.wun

I think the 357 Marlin would be the "one".Light,short,and I could take plinker up to
heavy loads.

m.wun

With those 125gr bullets and a AI chamber that gun might reach out fairly far for deer
and thin skinned game.

m.wun

Go to Texas boars website and he has a pictorial of hog anatomy one layer at a time.The
first pic is the hog,then with it skinned,then shoulder removed, so on and so on.There is a good
write up on the photos and it talks cal. and bullets.

m.wun

Will do thanks!

m.wun

Thanks for the info!I loaded a round to see it.I think I will load a few more to try and
I always measure each load then seat the bullet before loading powder in the next case
on loads of this type.

m.wun

I have some 110gr 30 carbine bullets,308 win cases and have plenty of Unique laying
around.If I combine all three can there be problems?I have looked around but dont have any
solid info for a safe load.I dont have a need for them, but I dont have a need for half my
things.

m.wun

I drove a Ranger "edge" pickup with the 3 liter eng.The engine was the multi fuel model that has the the green leaf emblem on the tailgate.That engine didnt like 87 oct gas so I had to run super so it wouldnt ping and knock.It was a great truck but I didnt care for the engine. If it has th...

m.wun

No real expertise here other than shooting a 458 lott in a Ruger#1 with the factory sights.
Recoil was stiff about like shooting slugs in a 12ga.I was able to hit a 10" gong at 100yrd off
hand with the factory iron sights and 500gr solids.That gong thumped hard that day!

m.wun

Crappie are the best eating freshwater fish there is in my book.I do like catfish if caught in clear water and trout arn't bad if they are caught in cold mountain waters.My best crappie fishing was in southern Kansas in a little creek fishing with a bobber and live minows.I hooked 8-10 crappie and t...

m.wun

If its not worth eating you could donate it to the local FFA or 4H club for some kid
who cant afford a project...

m.wun

I got the Swiss Army Knife in the "Camper" version.I dont know what ever happened
to it.When it disappeared I bought a "Hunter" Buck Knife.I loved the smell of the leather
case that came with it!

m.wun

What speed are those runnin?

m.wun

How are they for feeding diff. type bullets?The gun looks compact and solid Ill bet they
kick kind of sharp!

m.wun

I would say Low and Slow,seasoned well and some smokiness couldnt hurt.

Search found 507 matches