Lead Bullet Company - new to me

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
AndyM
Levergunner 3.0
Posts: 507
Joined: Fri Dec 21, 2007 7:40 am
Location: PA

Lead Bullet Company - new to me

Post by AndyM »

I found this new (at least to me) lead bullet company today
http://www.missouribullet.com/index.html
Their bullets looks good and they are not made rock hard - most are running around 12 BHN

Anybody out there use'em? Their 45-70 405gr. FP really caught my attention. At 200 bullets for $36.00 plus shipping it is a good price for those that do not cast their own bullets. If I can get them lubed with SPG - I would try them in my Pederdoli Sharps. I was using 405gr. FP from Mt.Baldy - but they are 100 bullets for $35.00 plus shipping. Mt Baldy is at a 20:1 mix - so the Missouri bullets look a little harder.

I really want to try lead bullets in my Marlin Guide gun also, and at these prices - an order might be headed their way.

Their .313 diameter FP might work in my 32-20 and their 45 colt bullets look good. For those that have them - the list a 38-40 bullet also. Their 44-40 bullets measure at .430 - I usually shoot a .429.

I guess I am looking for any feedback, if anybody from this group have used them.
thanks...
"Hokey religions and ancient weapons are no match for a good blaster at your side, kid" - Han Solo, Star Wars...
User avatar
TedH
Advanced Levergunner
Posts: 8395
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: Lead Bullet Company - new to me

Post by TedH »

Those are made not far from me, and the local gun shop keeps some on the shelf. They are good looking bullets and the price seems right. I haven't bought any only because I cast my own.
NRA Life Member
User avatar
Andrew
Advanced Levergunner
Posts: 2043
Joined: Thu Sep 06, 2007 5:30 pm
Location: Southern Missouri

Re: Lead Bullet Company - new to me

Post by Andrew »

Well if they're from Missouri they got to be good. 8)
ImageImage
Qui tacet consentit. (silence implies consent)
The Boring Blog
User avatar
J Miller
Member Emeritus
Posts: 14906
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Lead Bullet Company - new to me

Post by J Miller »

Ted,

They don't have any pictures on their site of individual bullets. Do you know if the .45 255gr SWCS are flat or bevel based?

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
User avatar
TedH
Advanced Levergunner
Posts: 8395
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: Lead Bullet Company - new to me

Post by TedH »

Joe,
I don't recall. If they have that particular bullet on the shelf, I will find out tomorrow during my weekly visit to the candy store.
NRA Life Member
User avatar
J Miller
Member Emeritus
Posts: 14906
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Lead Bullet Company - new to me

Post by J Miller »

Ted,

Thanks.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
User avatar
Ysabel Kid
Moderator
Posts: 28846
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: Lead Bullet Company - new to me

Post by Ysabel Kid »

You guys are so lucky... I stopped by two "candy stores" today, specifically looking for some lead bullets for reloading. One didn't have diddly-squat (the usual condition for most store around here); the other apparently thinks that the price of lead and gold have converged on the latter!!! :shock: :shock: :shock:
Image
cnjarvis
Senior Levergunner
Posts: 1053
Joined: Wed Apr 11, 2007 9:47 pm
Location: Central OK

Re: Lead Bullet Company - new to me

Post by cnjarvis »

J Miller wrote:Ted,

They don't have any pictures on their site of individual bullets. Do you know if the .45 255gr SWCS are flat or bevel based?

Joe
Yeah they do Joe but not where you'd think they'd be. Once you get to the bullet listings you have to click on the red avatar. It's a link to another page with the pics you were looking for.

Like so: http://www.missouribullet.com/shop/deta ... &keywords=
User avatar
AndyM
Levergunner 3.0
Posts: 507
Joined: Fri Dec 21, 2007 7:40 am
Location: PA

Re: Lead Bullet Company - new to me

Post by AndyM »

J Miller wrote:Ted,

They don't have any pictures on their site of individual bullets. Do you know if the .45 255gr SWCS are flat or bevel based?

Joe
One the website they sure look beveled to me.
"Hokey religions and ancient weapons are no match for a good blaster at your side, kid" - Han Solo, Star Wars...
User avatar
J Miller
Member Emeritus
Posts: 14906
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Lead Bullet Company - new to me

Post by J Miller »

cnjarvis,

Thanks. I missed that red avatar link completely.

Yep, they're the typical bevel based jobies.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
Post Reply