OT- Are SR7625 and SR4756 ball powders?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
BenT
Advanced Levergunner
Posts: 2731
Joined: Thu Sep 06, 2007 9:21 pm
Location: Northern Wisconsin

OT- Are SR7625 and SR4756 ball powders?

Post by BenT »

It doesn't say even on the IMR website. I'm just looking for a powder that meters better than unique. Specialy in 32 h&r mag with such small quanityof powder. Thanks.
cnjarvis
Senior Levergunner
Posts: 1053
Joined: Wed Apr 11, 2007 9:47 pm
Location: Central OK

Post by cnjarvis »

According to Speer's #13 manual they're both single base flake powders.
Scott Young
Levergunner 2.0
Posts: 213
Joined: Mon Dec 17, 2007 7:07 pm

Post by Scott Young »

ben i made a dipper out of a 22 mag casing. it hold app. 5 grains of unique. it is extremely consistent due to the small opening.

i also made a dipper out of a .32 hr casing and trimmed it down to what i needed.
BenT
Advanced Levergunner
Posts: 2731
Joined: Thu Sep 06, 2007 9:21 pm
Location: Northern Wisconsin

Post by BenT »

Thanks Gentlemen, I guess I'll stick with unique. I'll try your dipper suggestion Scott.
runfiverun
Levergunner 2.0
Posts: 145
Joined: Thu Dec 27, 2007 11:19 pm

Post by runfiverun »

sr-4756 is a really small flake
about 4 to 1 the size of unique i use it in my colt
behind 250-xtp for deer havn't had one go more than 5 steps
with a front third hit
Post Reply