Williams FP Firesight installation

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Bigahh
Levergunner 3.0
Posts: 927
Joined: Mon Dec 17, 2007 9:53 pm
Location: N.E. Wisconsin

Williams FP Firesight installation

Post by Bigahh »

I have one on the way to try out on either my Model 64A, or my NIB 1984 model 94 in 30-30. If I like it I will order a 2nd. I am assuming both rifles are Pre -D&T from the factory(the 2 small parallel screws on the receiver) Is this an easy job for myself to install? Or should I bring it to a smith? Any advice is appreciated.
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Post by Chuck 100 yd »

If the rifle is pre D&T it is a simple project and the instructions come with the sight. Have fun. :wink:
Top
RSY
Senior Levergunner
Posts: 1082
Joined: Sat Mar 31, 2007 5:09 pm
Location: Georgetown, TX

Post by RSY »

Yeah, installing it is actually easier than using it...and it's pretty simple to use.

I will advise this, though: Go ahead and order the second one, now. :D

rsy
Top
User avatar
Old Shatterhand
Levergunner 2.0
Posts: 292
Joined: Thu Sep 13, 2007 3:52 pm
Location: Nericia, Sweden

Post by Old Shatterhand »

Tri the FP with original sight before installing the Firesight. IMHO the Firesight is too bright, and you may find it easier to shoot well with a standard bead or post.

Old Sh.
Top
Post Reply

Return to “General Discussion”