Breaking in my new Model 53 (photo)
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- KirkD
- Desktop Artiste
- Posts: 4406
- Joined: Sat Apr 07, 2007 6:52 am
- Location: Central Ontario, Canada
- Contact:
Breaking in my new Model 53 (photo)
I put the final touches on a PowerPoint file that I had to email somebody, attached it to an email and hit the 'Send' icon. My internet access is a wireless one that comes off the top of a feed mill about 5 miles away ..... it's not slow, but it's not fast either, so I figured it was time to take a break while it uploaded. I stood up and took a look out the window at the alfalfa field down by the river.
By cracky! There were two Woodchucks down by the alfalfa field. Earlier today, I had counted at least four of them and probably there is up to seven, judging by all the fresh holes and dirt piles drilled into my field .... the Groundhog crop this year is the best yet. At lunch time earlier, I had time to load up only two rounds, 9 grains of IMR 4227 under a Magma cast 115 grain bullet sent to me by JerryB to try out. That load gave me 1,149 fps with an E.S. of 74 fps and a S.D. of 30 fps; at the range a week or so ago, the five shots I had loaded up with this recipe had gone into 2 & 3/16" at 100 yards. I figured this load is a keeper, and I've ordered the mould.
I grabbed my 'new' Winchester Model 53 chambered in 32 W.C.F., more commonly known as 32-20 and fed my two rounds into the magazine. This rifle had been serialized in Winchester's Polishing Room on April 19, 1926, 84 years ago last week. It is in superb condition and I doubt it has ever worked a day in its life. Time to change that. As I headed out the door, I levered in a round and lowered the hammer to half-cock. The first fellow saw me coming over 100 yards away, but there was some scrub and a clump of three Burr Oaks between me and the second Groundhog. When I came clear of the scrub, there was Woodchuck number two, with just his head and shoulders visible. He was right on his hole and he had spotted me. It was a free standing, offhand shot of 28 yards. My five shot group at 100 yards showed that the sights shot 1 & 1/2" to the right at 100 yards and I hadn't had time to adjust them yet, so I slid the top of the bead over to the right about 1/2" or so and touched off the little rifle. There was a solid thump and I knew the vintage rifle had started earning its keep. Photo is below ....
By cracky! There were two Woodchucks down by the alfalfa field. Earlier today, I had counted at least four of them and probably there is up to seven, judging by all the fresh holes and dirt piles drilled into my field .... the Groundhog crop this year is the best yet. At lunch time earlier, I had time to load up only two rounds, 9 grains of IMR 4227 under a Magma cast 115 grain bullet sent to me by JerryB to try out. That load gave me 1,149 fps with an E.S. of 74 fps and a S.D. of 30 fps; at the range a week or so ago, the five shots I had loaded up with this recipe had gone into 2 & 3/16" at 100 yards. I figured this load is a keeper, and I've ordered the mould.
I grabbed my 'new' Winchester Model 53 chambered in 32 W.C.F., more commonly known as 32-20 and fed my two rounds into the magazine. This rifle had been serialized in Winchester's Polishing Room on April 19, 1926, 84 years ago last week. It is in superb condition and I doubt it has ever worked a day in its life. Time to change that. As I headed out the door, I levered in a round and lowered the hammer to half-cock. The first fellow saw me coming over 100 yards away, but there was some scrub and a clump of three Burr Oaks between me and the second Groundhog. When I came clear of the scrub, there was Woodchuck number two, with just his head and shoulders visible. He was right on his hole and he had spotted me. It was a free standing, offhand shot of 28 yards. My five shot group at 100 yards showed that the sights shot 1 & 1/2" to the right at 100 yards and I hadn't had time to adjust them yet, so I slid the top of the bead over to the right about 1/2" or so and touched off the little rifle. There was a solid thump and I knew the vintage rifle had started earning its keep. Photo is below ....
Last edited by KirkD on Thu Apr 22, 2010 4:55 pm, edited 1 time in total.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
- gamekeeper
- Spambot Zapper
- Posts: 17486
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Over the pond unfortunately.
Re: Breaking in my new Model 53 (photo)
That's one nice looking old/new rifle.. Congratulations.
Whatever you do always give 100%........... unless you are donating blood.
-
- Advanced Levergunner
- Posts: 2569
- Joined: Sat Sep 15, 2007 12:51 pm
Re: Breaking in my new Model 53 (photo)
Oh YEEAH!!
"IT IS MY OPINION, AND I AM CORRECT SO DON'T ARGUE, THE 99 SAVAGE IS THE FINEST RIFLE EVER MADE IN AMERICA."
WIL TERRY
WIL TERRY
-
- Advanced Levergunner
- Posts: 2427
- Joined: Thu Sep 06, 2007 8:37 pm
- Location: Texas
Re: Breaking in my new Model 53 (photo)
[My five shot group at 100 yards showed that the sights shot 1 & 1/2" to the right at 100 yards and I hadn't had time to adjust them yet, so I slid the top of the bead over to the right about 1/2" or so and touched off the little rifle. There was a solid thump and I knew the vintage rifle had started earning its keep.]
And, here, I thought Kentucky was in the USofA, and not the GWN (Great White North) !
Nice use of OUR Kentucky windage, there, Kirk !
.
And, here, I thought Kentucky was in the USofA, and not the GWN (Great White North) !
Nice use of OUR Kentucky windage, there, Kirk !
.
Re: Breaking in my new Model 53 (photo)
This is a great report, and a truly beautiful rifle. Glad you're giving her some use. - DixieBoy
When the People Fear Their Government There is Tyranny; When the Government Fears the People There is Liberty.
- Griff
- Posting leader...
- Posts: 20877
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Breaking in my new Model 53 (photo)
Jealousy reigns supreme...
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- Buck Elliott
- Member Emeritus
- Posts: 2830
- Joined: Mon Sep 10, 2007 12:15 pm
- Location: Halfway up Sheep Mountain -- Cody, Wyoming
Re: Breaking in my new Model 53 (photo)
Kentucky Windage works everywhere...
Regards
Buck
Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
Buck
Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
- kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: Breaking in my new Model 53 (photo)
Good job, Kirk. The last Marmot I shot on my place was with an old Stevens in 22LR. I've got to get some rounds worked up for my 53.
Old Law Dawg
Re: Breaking in my new Model 53 (photo)
It is a great report KD, escaping for a break like that is allways fantastic ain't it. Well done you
One hell of an efficient load you have there!
Nath.
One hell of an efficient load you have there!
Nath.
Psalm ch8.
Because I wish I could!
Because I wish I could!
- Ysabel Kid
- Moderator
- Posts: 27918
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
-
- Advanced Levergunner
- Posts: 5493
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Re: Breaking in my new Model 53 (photo)
Real proud for you Kirk, I am glad to see that bullet earn it's keep. Beautiful little rifle, you should do well with the groundhog control program this year. They do fry up good too, also bake one of them, bone it out and add some BBQ sauce for a great sandwich.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15
Re: Breaking in my new Model 53 (photo)
Kirk I wish you would have never started this post. For some reason I can not seem to get a Model 65(Browning) in 218 Bee out of my mind. I have even rearranged some funds so that I can purchase it when I find the right deal. Please do not post any more. I have been thinking about one in a Bee or 25-20 or 32-20 for a long time. But you put me over the edge!! Tom.
- KirkD
- Desktop Artiste
- Posts: 4406
- Joined: Sat Apr 07, 2007 6:52 am
- Location: Central Ontario, Canada
- Contact:
Re: Breaking in my new Model 53 (photo)
Those Browning Model 65's are absolutely gorgeous. You need to get one. Of course, you might also be interested in the just plumb amazing Browning Model 53 32-20.HEAD0001 wrote:Kirk I wish you would have never started this post. For some reason I can not seem to get a Model 65(Browning) in 218 Bee out of my mind. I have even rearranged some funds so that I can purchase it when I find the right deal. Please do not post any more. I have been thinking about one in a Bee or 25-20 or 32-20 for a long time. But you put me over the edge!! Tom.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
Re: Breaking in my new Model 53 (photo)
Kirk I have never seen one in 32-20. But I sure would like to find a good deal on one. I think I would buy it in a minute. I have seen a bunch of Browning's in 218, and I screwed up and passed up a real good deal. I have seen them with plain Jane wood and a couple that were gorgeous. I guess they made them in different grades. I really do not know what a great price would be. But if I found one I sure would find out.
I have been looking for a raccoon calling rifle. And I think a 32-20 or a 25-20 would make a great cartridge choice. With a good cast bullet I think those two cartridges would make a great rifle to save the pelts. I also think I could come up with a good load with the 218 Bee. Of course I would also like a Marlin 1894 in one of those cartridges. But those prices have went nuts. But then all the ones I see at the high prices are still for sale. Tom.
I have been looking for a raccoon calling rifle. And I think a 32-20 or a 25-20 would make a great cartridge choice. With a good cast bullet I think those two cartridges would make a great rifle to save the pelts. I also think I could come up with a good load with the 218 Bee. Of course I would also like a Marlin 1894 in one of those cartridges. But those prices have went nuts. But then all the ones I see at the high prices are still for sale. Tom.
- KirkD
- Desktop Artiste
- Posts: 4406
- Joined: Sat Apr 07, 2007 6:52 am
- Location: Central Ontario, Canada
- Contact:
Re: Breaking in my new Model 53 (photo)
Tom, if you're not familiar with the Browning Model 53 32-20, then you need to see one. They are even nicer than the Browning Model 65's. Here is one up for auction right now http://www.gunbroker.com/Auction/ViewIt ... =165602923
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
- kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: Breaking in my new Model 53 (photo)
Just a forewarning on anyone that's looking to get one of the Browning 53's. If you don't like the epoxy finish be careful taking it off. The wood was really nice looking on the one I bought, but I didn't care for the epoxy. I used JAFCO stripper to remove it and found the burled areas of the wood had huge cracks in it that the epoxy filled. I didn't see that before I did the removal, but I sure saw them afterwards. I now have low spots were the stripper removed the filling epoxy. I just stopped and started Tru-oiling the piece. Looks okay from a distance, but up close is a different matter. Too late for me. Beautiful little rifles though.
Old Law Dawg
Re: Breaking in my new Model 53 (photo)
What a great little rifle! Nice job on the hog too.
NRA Life Member
-
- Advanced Levergunner
- Posts: 4738
- Joined: Fri Sep 07, 2007 5:00 am
- Location: North Coast of America-Ohio
Re: Breaking in my new Model 53 (photo)
Great Job Kirk. I'm sure it must have been many of Your posts several years ago that convinced Me to get a 32-20. I have a Marlin and a Ruger Blackhawk. what a great cartdrige it is. Thanks for shareing over the years.