OT- Federal .38 SPL Nyclad is back.

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
336A
Levergunner 2.0
Posts: 322
Joined: Sat Sep 08, 2007 2:39 pm

OT- Federal .38 SPL Nyclad is back.

Post by 336A »

Federal has resumed the manufacture of the .38spl 125gr Nyclad ammunition. Finally there is some good standard pressure defensive ammo availabe for those of us that don't have +P rated snubbies. :D I just hope that they sell it in 50 round boxes and not the expensive 20rnd boxes.
User avatar
Hobie
Moderator
Posts: 13903
Joined: Sat Mar 31, 2007 1:54 pm
Location: Staunton, VA, USA
Contact:

Re: OT- Federal .38 SPL Nyclad is back.

Post by Hobie »

Good news, that was good stuff.
Sincerely,

Hobie

"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
User avatar
TedH
Advanced Levergunner
Posts: 8398
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: OT- Federal .38 SPL Nyclad is back.

Post by TedH »

I have'nt seen any of that stuff in years. When did they quit making it the first go around?
NRA Life Member
JohndeFresno
Advanced Levergunner
Posts: 4559
Joined: Fri Sep 07, 2007 1:52 pm

Re: OT- Federal .38 SPL Nyclad is back.

Post by JohndeFresno »

Tks for info. I switched to Silvertips, but I believe that Nyclad is the best factory round for my ol' aluminum .38 snubbie. I'll order some now!

UPDATE - Federal announces it on its site, and lists dealers for your Zip Code if you fill in the box; but I cannot find the ammo for sale (Federal P38M Nyclad) online at any of the ammo sites that I frequent:
Midway USA, MidSouth Shooter Supply, Natchez Shooters Supply, Wideners, Streichers, Brass-Plus, Cheaper Than Dirt, Graf & Sons, Crow Shooting Supply, Ammunition To Go, Sportsmens Guide, and some others.
User avatar
Modoc ED
Advanced Levergunner
Posts: 3332
Joined: Thu Sep 20, 2007 11:17 am
Location: Northeast CA (Alturas, CA)

Re: OT- Federal .38 SPL Nyclad is back.

Post by Modoc ED »

Almost all .38 Special is Out of Stock "No Backorder" at most places -- USAMidway for sure. A lot of different calibers are also no longer available. Same for primers and other components.

I guess you could call Obama's election a "Retail Sellout" for guns, ammo, and all things related to reloading.
ED
Image
Yer never too old
KCSO
Levergunner 3.0
Posts: 780
Joined: Wed May 14, 2008 3:57 pm
Location: North East Nebraska

Re: OT- Federal .38 SPL Nyclad is back.

Post by KCSO »

Uh the 50 round boxes will cost 2 1/2 time the 20 round boxes. They went to the 20's to ease the sticker shock.
Idiot
Levergunner 3.0
Posts: 767
Joined: Fri Feb 22, 2008 1:56 pm
Location: Southwest USA

Re: OT- Federal .38 SPL Nyclad is back.

Post by Idiot »

Very good news! This was my standard snubbie load until my stash ran out. I will rush out and replenish as soon as they hit the gun store shelves. I don't care if they sell them in fifties, twenties, or one at a time, I'll buy a bunch of this good ammo.

Once on a javalina hunt, I gave my rifle to a partner to cover a wash and went into a canyon to grub out a pig that had been wounded. It wasn't until I got into the canyon and saw that a bunch of nervous javalina were milling around their wounded pal that I realized that the only gun I had on me was a snub nosed 38 Special. One javalina that had been down got up and began to trot away. I took careful aim and punched a hole through its ribs with the 38. I slowed just a bit and I shot and hit it again, this time in the ham and it really slowed down. Not wanting to loose the critter I closed the 35 yard gap between us and ran in front of its path and hit it one more time - this time in the shoulder - and it went down. While dressing it out I discovered that I'd forgotten to replace my Nyclads with full wad cutters like I'd intended. I was really messing up. However, each Nyclad, except the one into the ribs - which went un-recovered, had mushroomed fully, stayed together, and made a mess of the flesh it encountered until coming to rest against off side hide on chest shot and the hip bone on the ham shot.

I think these little bullets will do the dirty duty they were made for it called upon.
User avatar
jeepnik
Advanced Levergunner
Posts: 7418
Joined: Sun Apr 08, 2007 1:39 pm
Location: On the Beach

Re: OT- Federal .38 SPL Nyclad is back.

Post by jeepnik »

Great news. That's the best round for 2 & 3 inch 38's I've found. Now I'll just have to find a dealer as buying ammo by mail if verbotten here. Oh well, I just checked the web page. Turner's has them. I was just there three days ago and they didn't mention them. Now I guess I'll just have to go back. :mrgreen:
Jeepnik AKA "Old Eyes"
"Go low, go slow and preferably in the dark" The old Sarge (he was maybe 24.
"Freedom is never more that a generation from extinction" Ronald Reagan
"Every man should have at least one good rifle and know how to use it" Dad
User avatar
Rexster
Levergunner 3.0
Posts: 626
Joined: Thu Sep 13, 2007 7:27 pm
Location: SE Texas

Re: OT- Federal .38 SPL Nyclad is back.

Post by Rexster »

I hope the new stuff chronographs like the old stuff. More than once, when a gunwriter posted his results with various factory snubby loads, the 125-grain standard velocity Nyclad was true to its advertised velocity, while +P 125-grain stuff, for all its noise, was moving slower than the Nyclad. Federal had gotten the recipe right for the short barrel in their old Nyclad. I still have a little of the old left; on my last box. This is a WARM load, too, notably stouter than other standard-velocity stuff.
Have Colts, will travel.

The avatar is the menuki of my Rob Douglas Wakisashi.
Post Reply