Anyone have a drill I can borrow to do a reline on a 22?
Don't really want to spend the $100 this month and want
to have another option for a new shooter. I can have it
done for about $150 but want to do this one myself. It
may be used to indoctrinate my niece into shooting/hunting.
I will eventually try restocking this one also as it has a
couple screws in the wrist.
Anyone recommend one liner over another? I will be relining
a 1890s Stevens Favorite.
Jay
OT - gunsmith Q
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
OT - gunsmith Q
KI6WZU
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”
-
Andrew
- Advanced Levergunner
- Posts: 2043
- Joined: Thu Sep 06, 2007 5:30 pm
- Location: Southern Missouri
Re: OT - gunsmith Q
I didn't know they wore out.bsaride wrote:Anyone have a drill I can borrow to do a reline on a 22?
Re: OT - gunsmith Q
You must be shooting one of those new guns (post 1900)Andrew wrote:I didn't know they wore out.bsaride wrote:Anyone have a drill I can borrow to do a reline on a 22?
with the fancy nickle steel.
KI6WZU
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”
-
Mike Hunter
- Member Emeritus
- Posts: 285
- Joined: Thu Dec 20, 2007 6:28 pm
Jay
$150 is pretty cheap to have someone else do it.
What will it cost to DIY, $50 for a liner, chamber reamer unless you have one then its another fifty sixty bucks, do you have a lathe or are you planning on doing it with a hand drill? Finishing off the muzzle/ breech end; a 2 minute job in a lathe
Epoxy another ten bucks or so. In my mind you’re not saving much, and would save you a lot of headache.
Mike Hunter
$150 is pretty cheap to have someone else do it.
What will it cost to DIY, $50 for a liner, chamber reamer unless you have one then its another fifty sixty bucks, do you have a lathe or are you planning on doing it with a hand drill? Finishing off the muzzle/ breech end; a 2 minute job in a lathe
Epoxy another ten bucks or so. In my mind you’re not saving much, and would save you a lot of headache.
Mike Hunter
Bro has a machine shop so I can get it done easily enough.Mike Hunter wrote:Jay
$150 is pretty cheap to have someone else do it.
What will it cost to DIY, $50 for a liner, chamber reamer unless you have one then its another fifty sixty bucks, do you have a lathe or are you planning on doing it with a hand drill? Finishing off the muzzle/ breech end; a 2 minute job in a lathe
Epoxy another ten bucks or so. In my mind you’re not saving much, and would save you a lot of headache.
Mike Hunter
I want to start getting together the tools and doing repairs,
rebuilds myself. I have 2 motorcycles and a truck project
that will need to get done before I get my own lathe & mill.
Might just put this one off til later in the year, if niece decides
to get serious then I would like to rebuild it for her, maybe
Christmas or her b-day next year.
Jay
KI6WZU
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”