Winchester 94 Transition rifle
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner
- Posts: 38
- Joined: Sun Oct 21, 2018 7:28 am
Winchester 94 Transition rifle
A couple of weeks ago I picked up a Winchester 94 in .30-30, known as a "transition" rifle. This gun was made in 1939, has the newer style of barrel but has the earlier receiver minus the saddle ring and earlier buttplate. It has an excellent bore and an action silky smooth. This gun came out of Alaska, wish I knew more of the story and where it was used.
Re: Winchester 94 Transition rifle
Looks good for coming from a hostile climate...
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Re: Winchester 94 Transition rifle
How far was the target please?
Thanks.
N.
Thanks.
N.
Psalm ch8.
Because I wish I could!
Because I wish I could!
Re: Winchester 94 Transition rifle
Welcome aboard, David! Good lookin' rifle!
Have you hugged your rifle today?
- gamekeeper
- Spambot Zapper
- Posts: 17474
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Over the pond unfortunately.
Re: Winchester 94 Transition rifle
That was a great find, congratulations and welcome to the fire....
Whatever you do always give 100%........... unless you are donating blood.
Re: Winchester 94 Transition rifle
.
Nice rifle - Welcome to the board !
.
Nice rifle - Welcome to the board !
.
Re: Winchester 94 Transition rifle
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Re: Winchester 94 Transition rifle
Doh!
Yeah see it now
Thanks Tycer.
N.
Psalm ch8.
Because I wish I could!
Because I wish I could!
Re: Winchester 94 Transition rifle
Welcome to the fire. You've found a great place.
Nice carbine!
In my humble opinion, Winchesters quality peaked between the wars. I'm not talking about fit and finish, they had mastered that earlier. I'm considering things like metallurgy and forging quality, also. A lot was learned during WW1 about manufacturing. Between the wars, companies still cared about their name and reputation. This was carried on while a depression was going on.
After WW2, it was all about lowering production cost and maximizing profits. Nothing has changed.
Nice carbine!
In my humble opinion, Winchesters quality peaked between the wars. I'm not talking about fit and finish, they had mastered that earlier. I'm considering things like metallurgy and forging quality, also. A lot was learned during WW1 about manufacturing. Between the wars, companies still cared about their name and reputation. This was carried on while a depression was going on.
After WW2, it was all about lowering production cost and maximizing profits. Nothing has changed.
"Oh bother", said Pooh, as he chambered another round.
- Griff
- Posting leader...
- Posts: 20876
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Winchester 94 Transition rifle
and Welcome to THE Forum.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- Sixgun
- Posting leader...
- Posts: 18763
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: Winchester 94 Transition rifle
Just noticed something...that buttstock is not original to the gun....that's a saddle ring carbine buttstock....and it's made from gumwood.----6
Re: Winchester 94 Transition rifle
Sixgun is absolutely right! That vintage '94 carbine had the model 55 type 'shotgun' buttstock and were walnut. Gumwood went out right around WW1. Rest of gun looks good, however.
Re: Winchester 94 Transition rifle
Make something up. Include multiple man-eating bears and a one-eyed indian guide who knows how to throw a knife. Burn some cryptic hieroglyph into the wood under the butt-plate. Show it to your buddies and tell them that you don't know what it means, then when you're drinking with those buddies, turn to the rifle every once in a while and say "I know..."David LaPell wrote: ↑Mon Oct 22, 2018 9:18 pmThis gun came out of Alaska, wish I knew more of the story and where it was used.
Government office attracts the power-mad, yet it's people who just want to be left alone to live life on their own terms who are considered dangerous.
History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
-
- Levergunner
- Posts: 38
- Joined: Sun Oct 21, 2018 7:28 am
Re: Winchester 94 Transition rifle
Sorry to take so long to get back on to this post, BUT, this is not the only one of these I have seen, I found two more Winchester 94's in this serial number range, had this same buttstock and they look just like this, gumwood stock and all. From what I read, they were called the transition guns because Winchester was using up all the parts they had left on hand prior to 1940 when they used the newer flat buttstock. The tang on this gun even has two screws where you can mount a tang sight. Here is another gun that was for sale, and notice the buttstock. These guns all had the older style SRC carbine buttstock without the Saddle ring but the newer style barrel with sights.
https://www.gunsamerica.com/975152046/W ... -30wcf.htm
- Rube Burrows
- Advanced Levergunner
- Posts: 2096
- Joined: Tue Oct 19, 2010 12:27 pm
- Location: Louisiana
Re: Winchester 94 Transition rifle
Great looking rifle and sounds like it is a real shooter.
- Sixgun
- Posting leader...
- Posts: 18763
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: Winchester 94 Transition rifle
Ok David.......maybe so....for the most part src buttstocks were not being used after the late twenties. Anything is possible and I would have agreed if the wood to metal fit was closer.
There's several old sayings amongst collectors....it's easy to convince yourself but it's not easy to convince a future buyer. Either way, it does not hurt your rifle at all as even if it was changed, it was a contemporary change which is usually accepted.----6
There's several old sayings amongst collectors....it's easy to convince yourself but it's not easy to convince a future buyer. Either way, it does not hurt your rifle at all as even if it was changed, it was a contemporary change which is usually accepted.----6
-
- Levergunner
- Posts: 38
- Joined: Sun Oct 21, 2018 7:28 am
Re: Winchester 94 Transition rifle
The person who I have been finally trying to get ahold of is Bert H. over at WinchesterCollector.org, he's apparently a Historian and Board member at the Winchester Arms Collector's Association. He has done research on these guns and posted this on their forum a while back.Sixgun wrote: ↑Tue Feb 12, 2019 10:16 am Ok David.......maybe so....for the most part src buttstocks were not being used after the late twenties. Anything is possible and I would have agreed if the wood to metal fit was closer.
There's several old sayings amongst collectors....it's easy to convince yourself but it's not easy to convince a future buyer. Either way, it does not hurt your rifle at all as even if it was changed, it was a contemporary change which is usually accepted.----6
"I have surveyed a total of (376) transitional Carbines thus far, and of that number, (42) of them were 32 Winchester Specials. Doing the math, that implies that just over 11% of the total production were made in 32 WS. My estimate of the total production for the transitional carbines is 20,850. Many of the serial numbers in the Transitional range were assigned to Model 64s. If you use my production estimate of 20,580 transitional carbines, then multiply it by 11%, the extrapolated production number for the 32 WS would be approximately 2,300. The number of them still in 85% condition is undoubtedly a lot smaller than that."
So apparently at least 376 guns like mine (or 375 plus mine if it was surveyed before I got it) exist.
He also added that
"The Model 94 "Transitional" Carbines were manufactured from approximately May 1932 through June 1937. The "transitional" had the new Proof Steel barrel, with the ramp style front sight and the 22-series rear sight, but it retained the older style butt stock and carbine butt plate. The rear sight dovetail slot remained close to the receiver frame ring. The serial number range is 1082900 - 1129750."
My gun falls into the number of 1108XX.
Again it seems as that there is a run of these guns out there, and they are their own subsection of Model 94's, I often wonder if the fact that it was during the Great Depression and maybe Winchester was trying to save money and use up as many older parts as they could. We will probably never know for sure.
Re: Winchester 94 Transition rifle
Still a nice looking 94.
I like the gumwood src buttstock. If folks would shoot them off the bicep (as designed/intended) instead of the shoulder, more would be around... That buttplate is a hold over from muzzle loader days. The pamphlet that came with our older production Great Plains .54 caplock specifically recommends bicep firing.
I like the gumwood src buttstock. If folks would shoot them off the bicep (as designed/intended) instead of the shoulder, more would be around... That buttplate is a hold over from muzzle loader days. The pamphlet that came with our older production Great Plains .54 caplock specifically recommends bicep firing.
-
- Levergunner
- Posts: 38
- Joined: Sun Oct 21, 2018 7:28 am
Re: Winchester 94 Transition rifle
She's a good shooter, this is at 125 yards.Scruffy49 wrote: ↑Wed Feb 13, 2019 10:12 am Still a nice looking 94.
I like the gumwood src buttstock. If folks would shoot them off the bicep (as designed/intended) instead of the shoulder, more would be around... That buttplate is a hold over from muzzle loader days. The pamphlet that came with our older production Great Plains .54 caplock specifically recommends bicep firing.
- Sixgun
- Posting leader...
- Posts: 18763
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: Winchester 94 Transition rifle
OK, your convincing me. although I have never heard of your research, it's more than probable....its likely.....one thing for sure......in the old days, especially during the depression, nothing got thrown out. You have to figure, there's piles of parts all over the place and there was a payroll to meet.....Joe, "says, "hey boss, I just found a pallet of SRC buttstocks". The boss tells him to make use of them. I have a low wall winder musket in .22 L.R. that did not leave the factory until 1927....it has a high number receiver that was a left over from the military contract....the bossman would say, "put a barrel and a stock on those receivers and make it in .22 Long rifle so it will sell.
Looks like you have an excellent shooter there. ---6
Looks like you have an excellent shooter there. ---6
Re: Winchester 94 Transition rifle
Interesting. Have have seen, and own a couple, post SRC examples with a carbine butt. I have never seen one late enough to have a ramp front sight with the carbine butt. Especially in gumwood. I had never heard this, but find it completely believable. As Six said, Winchester threw nothing out.
Looks like a shooter, for sure! I like the 32WS. I have several examples, in rifle and carbine. They all shoot well. My most accurate Winchester lever is a 32.
Looks like a shooter, for sure! I like the 32WS. I have several examples, in rifle and carbine. They all shoot well. My most accurate Winchester lever is a 32.
"Oh bother", said Pooh, as he chambered another round.
- QCI Winchesters
- Levergunner 2.0
- Posts: 243
- Joined: Tue Jan 29, 2013 12:08 am
- Location: Queen Charlotte Islands, Canada
Re: Winchester 94 Transition rifle
Also, remember that Winchester used the same butt with carbine buttplate on the 1892 carbine, 1895 carbine, and 1895 and 92 muskets. A possible source for carbine butts would me those left over from the end of 1895 carbine production, but all I have seen were walnut.
When you have to shoot, shoot! Don't talk!
Re: Winchester 94 Transition rifle
All of mine with gumwood are from around 1900 to 1910.
All prior to, and later, are walnut.
If I've learned anything, however, is that there is no absolutes.
All prior to, and later, are walnut.
If I've learned anything, however, is that there is no absolutes.
"Oh bother", said Pooh, as he chambered another round.
- QCI Winchesters
- Levergunner 2.0
- Posts: 243
- Joined: Tue Jan 29, 2013 12:08 am
- Location: Queen Charlotte Islands, Canada
Re: Winchester 94 Transition rifle
I had one from 1904, and another from 1913, both were gumwood, and currently have one from 1910, walnut.
When you have to shoot, shoot! Don't talk!
Re: Winchester 94 Transition rifle
Howdy folks, new here saw this post thought I would chime in. I have one of the transitional 94 carbine s myself 1,115,xxx .
There are so many variations during this time,the finishes on this era is of great interest to me . They were still using machine bluing on receivers and rust bluing on barrels and mag tubes until 1938.
Side by side with a 1948 carbine
There are so many variations during this time,the finishes on this era is of great interest to me . They were still using machine bluing on receivers and rust bluing on barrels and mag tubes until 1938.
Side by side with a 1948 carbine
You do not have the required permissions to view the files attached to this post.
- Old Savage
- Posting leader...
- Posts: 16740
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Re: Winchester 94 Transition rifle
Sixgun is likely your man on this.
Re: Winchester 94 Transition rifle
For the record these same transitional rifles are found in the 1892 carbine. Friend of mine has a model 92 with ramped front barrel ,whelen fluted comb model 55 steel buttplate,eastern type receiver with no saddle ring.
I've seen these carbines with carbine buttplate,with 55 serrated steel buttplate, 22H rear sight 3C short elevator,#44 ladder sight . The serial range is pretty close on these .Renneburg notes and shows these in his book.
When I purchased mine a gun shop had two serial numbers very close together ,wish I could have purchased both but glad I got the one I did.
I've seen these carbines with carbine buttplate,with 55 serrated steel buttplate, 22H rear sight 3C short elevator,#44 ladder sight . The serial range is pretty close on these .Renneburg notes and shows these in his book.
When I purchased mine a gun shop had two serial numbers very close together ,wish I could have purchased both but glad I got the one I did.
Re: Winchester 94 Transition rifle
There's nothing like a pre war Winchester!
- Scott Tschirhart
- Advanced Levergunner
- Posts: 4077
- Joined: Fri Oct 16, 2020 2:56 pm
- Location: San Antonio, Texas
Re: Winchester 94 Transition rifle
Beautiful rifle. I wish it could tell us where it has been and what it has witnessed.
Re: Winchester 94 Transition rifle
I got my serial number wrong,had to get it out of safe its
1,105,441 1936 production .This rifle is almost new and may be unfired ,there was no evidence of any fouling ,copper or staining inside but like so many rifles of the era the machine bluing on the receiver and buttplate have flaked.
1,105,441 1936 production .This rifle is almost new and may be unfired ,there was no evidence of any fouling ,copper or staining inside but like so many rifles of the era the machine bluing on the receiver and buttplate have flaked.
You do not have the required permissions to view the files attached to this post.
-
- Levergunner 2.0
- Posts: 492
- Joined: Wed Dec 09, 2020 12:39 am
Re: Winchester 94 Transition rifle
Welcome from another rookie and congrats on a neat ole 94. I have a 38 model which is just your standard ole 94. Ugly as sin, but boy that action is like melted butter on an eels belly.
You do not have the required permissions to view the files attached to this post.
Re: Winchester 94 Transition rifle
Does your 38 have a saddlering carbine buttplate or the straight serrated 55 type?
-
- Levergunner 2.0
- Posts: 492
- Joined: Wed Dec 09, 2020 12:39 am
Re: Winchester 94 Transition rifle
The regular serrated version.
Re: Winchester 94 Transition rifle
Recently saw one of these transitional carbines on gunbroker an#1017653 this is a lot earlier number than previously believed . This carbine had ramp front sight ,saddlering,carbine buttplate.
Interestingly there is a carbine on there now in the 1059xxx 1929 that has no saddle ring but has post front sight.
Based on what I've seen the transition carbines were observed over 100,000 serial numbers .
This is a very interesting subject to me ,anyone else has one of these transitional carbines be sure to post up the specifics.
Interestingly there is a carbine on there now in the 1059xxx 1929 that has no saddle ring but has post front sight.
Based on what I've seen the transition carbines were observed over 100,000 serial numbers .
This is a very interesting subject to me ,anyone else has one of these transitional carbines be sure to post up the specifics.
- AJMD429
- Posting leader...
- Posts: 32276
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Winchester 94 Transition rifle
I think most mechanical things did, except maybe automobiles; the 50’s and 60’s were pretty cool.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: Winchester 94 Transition rifle
Pat C wrote: ↑Sat Nov 27, 2021 11:31 am Recently saw one of these transitional carbines on gunbroker an#1017653 this is a lot earlier number than previously believed . This carbine had ramp front sight ,saddlering,carbine buttplate.
Interestingly there is a carbine on there now in the 1059xxx 1929 that has no saddle ring but has post front sight.
Based on what I've seen the transition carbines were observed over 100,000 serial numbers .
This is a very interesting subject to me ,anyone else has one of these transitional carbines be sure to post up the specifics.
Disregard this info as I found out the carbine had a mail order proofed barrel . Still need any info concerning legit transitional carbines ..