marlin 336 extractor removal

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
lever-4-life
Levergunner 2.0
Posts: 341
Joined: Tue Sep 25, 2007 10:15 pm
Location: The nearest trout stream!! Nor-Cal

marlin 336 extractor removal

Post by lever-4-life »

How do I remove the extractor from a marlin 336 bolt?
Break on through to the other side!!!
Top
Leverdude
Senior Levergunner
Posts: 1518
Joined: Tue Apr 03, 2007 6:25 pm
Location: Norwalk CT

Post by Leverdude »

Put the bolt in a vice & push it off. A pair of needlenose pliers work real good.

Heres a not so great picture of how I do it. Open the pliers so the tips bear on the open ends of the extractor & push it off.:wink:
Image
Top
User avatar
lever-4-life
Levergunner 2.0
Posts: 341
Joined: Tue Sep 25, 2007 10:15 pm
Location: The nearest trout stream!! Nor-Cal

Post by lever-4-life »

Thank you!
Break on through to the other side!!!
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Post by Chuck 100 yd »

Thats how I do it too. :wink:
Top
Jaguarundi
Senior Levergunner
Posts: 1804
Joined: Tue Feb 19, 2008 3:27 am
Location: Wiregrass Area,Alabama

Post by Jaguarundi »

Which begs the question,What is the best way to install a extractor?
"Those who hammer their guns into plows will plow for those who do not."
Top
Post Reply

Return to “General Discussion”